Scotland
Expansion Joint Sealing in Inverclyde
Expansion joint sealing in all 19 towns and villages of Inverclyde, with every joint properly prepared, quoted before any work starts and a 12-month guarantee.
Expansion Joint Sealing in Inverclyde
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Where we work in Inverclyde
Expansion and movement joint sealing in walls, decks and floors. Pick your town below to see the details for your area, and send details for a fixed quote.
Larger towns
What else we do in Inverclyde
- Commercial washroom and wet-area sealing
- Industrial and floor joint sealing
- Coloured and colour-matched sealant
- Mastic sealing for building owners and managing agents
- Facade and window perimeter sealing
- Fire-rated sealing and fire stopping
- Commercial sealant contractors
- Construction and new-build mastic
Postcode areas we cover
Expansion joint sealing across Inverclyde: what to expect
Long runs of brick or block have movement joints built in, and they’re easy to miss until the sealant fails. Once the seal fails, rain reaches the cavity and the joint can no longer close. The old seal is cut away, backing rod goes in at depth, and a low-modulus masonry sealant is gunned and tooled, primed where the manufacturer specifies. Most enquiries involve expansion joints split through the centre of the bead and layers of sealant in a movement joint, on precast concrete panel joints, car park decks and ramps and cladding panel joints.
Site rules come first: signing in, inductions and any permit to work. Once we’re cleared to begin, we take the joints in the sequence agreed with you.
- First the joints are inspected, widths measured and the type of failure noted.
- You receive a fixed quote stating the product and the movement it is rated for.
- Where areas have to stay open, we agree a phased sequence before starting.
- The failed seal is cut out and both joint faces cleaned back to sound material.
- Depth is controlled with backing, the faces are primed where the maker calls for it, then the bead is laid and tooled.
- Finished joints are inspected, the cure time confirmed and the 12-month guarantee applies.
What affects the price in Inverclyde
A quote for movement joints depends on how many there are, their condition and the access. Ask us for a fixed quote.
Why clients in Inverclyde choose us
- Clear, fixed quotes
- Constructionline member for supplier checks
- Health and safety: CHAS accredited
- Over 20 years of commercial sealing
Get a fixed quote
Send us photos, drawings or a joint schedule are often enough for a fixed quote. If the job needs a look first, we will arrange a site visit.
Around Greenock
Recent enquiries here include premises near Watt Library, The James Watt pub and Wellington Academy, among other places. Greenock has its own railway station: Drumfrochar station. Other landmarks nearby include McLean Museum and Art Gallery (0.6 miles north-east) and Oak Mall (0.7 miles north-east). For a walk, there’s Lyle Hill.
Expansion joint sealing across Inverclyde: the area picture
Across Inverclyde, warehouse floors, loading bays and car parks in places such as Greenock, Port Glasgow and Gourock carry joints that take constant loads. Each joint needs a product suited to what runs over it and how much it moves.
In Scotland, managing agents for tenements are often called property factors, so mastic work on shared parts may come through the factor. In the parts of Inverclyde near the sea, the elevations facing the weather are where sealant gives up first, so they’re worth inspecting more often.
Greenock: For an estate such as Inverclyde Royal Hospital, which lies west of Greenock, the joints in ramps, decks and long building elevations all need attention over time. For a school such as Wellington Academy, playground and building joints can be done in the holidays.
Cost factors for movement joints
What shapes the price:
- Working within restricted access windows
- Removal of failed or old sealant
- How much there is to seal
- Backing rod, priming and other preparation
We don’t publish prices, because the scope varies so much from one building to the next. Call for a quote.
What to include in your enquiry
Diagnosis starts before we arrive. Let us know:
- Drawings or a marked-up plan, if available
- The asbestos register, for older buildings
- When you need the work done
- The postcode of the building
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. The easiest way is to phone 01277 525 020 or use the quote form.
Should maintenance staff do it?
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Commercial clients in Inverclyde
Hospitality, education, healthcare, office and retail clients come to us directly as well. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
When you manage a building on behalf of an owner, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative, plus a 12-month guarantee.
Why act early?
Some quotes just add sealant over the old bead. A bead laid on top of the failed one neither grips nor flexes properly. Full removal and preparation is in every quote.
Comparing quotes
- Which product they’ll use, and why it suits the joint
- What level of public liability insurance do they hold?
- The terms of the workmanship guarantee
- Can the work be phased to keep areas open?
How the job changes by surface
Car park decks and ramps
Failed deck joints often show as leaks on the level below. We strip the old seal, prepare the edges and seal again, and we will tell you if any edges need repairing first.
Internal floor movement joints
Wheeled traffic chips floor joint edges that aren’t supported. We match the product to the traffic and the movement, and tell you if edges need repairing first.
Your questions answered
How do you deal with asbestos in old sealant?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
How soon can the area be used again?
We’ll confirm how long the chosen product needs to cure.
How do we ask for a quote?
It works in four steps: send details, get a quote, we seal, guaranteed. The first step only needs photos and a postcode.
Can you fit around our working hours?
The office is staffed Monday to Friday, from 8am until 5pm. Tell us your site hours and access windows and the work will be fitted around them.
Will your applicators have CSCS cards?
Yes. Should the site need card details in advance, tell us and we’ll confirm them with the quote.
Does weather matter for sealant work?
For external joints, yes. The joint has to be dry and within the product’s temperature range, so damp, frosty or very cold days can stop external work. Internal work is rarely affected.
What exactly is a movement joint?
The terms overlap a great deal. Both let materials grow and shrink with temperature, moisture and load, and the seal across it keeps water and debris out.