Fire Stopping in Inverkip
Need fire stopping in Inverkip? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Improvised or mixed-product fire seals
- Unsealed openings around new pipes and cables
- Fire-stopping items raised at inspection or handover
Need fire stopping in Inverkip?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Our process
We follow your site rules from the start: signing in, inductions and any permit to work. Once we’re cleared to begin, the joints are worked through in the order agreed with your site contact, and each area is checked before we leave it. For work around Inverkip, we aim for one trip, which is why we ask for photographs and a full list first. Outside work also needs a suitable weather window.
- We read the specification, drawings or penetration schedule you send and raise any questions before we price.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- We fit the backing the detail asks for, to the stated depth.
- We apply the specified sealant to the depth and around the services as the detail shows.
- If an opening needs something other than sealant, we tell you instead of improvising.
What we need from you
- Explain the parking and delivery arrangements
- Make sure the joints can be reached
- Share the asbestos register for older buildings
Get a fixed quote
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.
Advice
Fire stopping in Inverkip
Penetration seals are fire tested to BS EN 1366-3 and linear joint seals to BS EN 1366-4, with results classified under BS EN 13501-2. That classification, such as EI 60 or EI 120, belongs to the product in its tested arrangement. Reproducing the tested arrangement on site is the part we take care of. We work on pipe penetrations, small duct penetrations where the tested detail allows and joints between fire-resisting walls and floors, and what we’re called in for most is damaged fire seals in risers and voids and service penetrations left open after M&E works. One point of contact handles commercial sealant work in Inverkip from the first photographs to the final walk-round, whether it’s one building or several.
For a building near Inverkip, we plan fire-rated sealing so it’s finished in one visit where possible. Photos of the gaps, the services and the wall or floor type help us bring the right products.
We sign every job off with a 12-month guarantee. The promise is simple: if our work fails within that year, we put it right.
- Where
- Inverkip (PA16)
- Region
- Inverclyde
- Cover
- 12 months on every job
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Keeping the joints sound
For the best life from the joints:
- Agree the fire-stopping specification before services go in
- Don’t let anyone top up a fire seal with the wrong product
- File the specified details where the next contractor can find them
- Get seals inspected before ceilings and boxing close
Never top up a fire seal with foam, ordinary silicone or filler. Repairs need the same product and detail as the original unless the designer specifies otherwise.
Ask every contractor who works in risers or voids to report openings they create. It costs little and catches breaches early.
Where services cross fire walls in Inverkip
In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, with products tested for that end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
Wherever services are added at a hospital such as Ravenscraig Hospital, 3.3 miles to the north-east of Inverkip, the compartment line has to be made good with the specified product.
Inverkip is about 4 miles south-west of Greenock, in Inverclyde. Across the PA16 postcode area, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Across Inverclyde, 19 places are covered, Inverkip among them. There’s a separate page for Glasgow, roughly 23 miles from Inverkip.
Business premises anywhere in PA16 are within our area. Among the streets we cover are Main Street, Station Road and Finnockbog Road. Nearby places we also cover include Braeside (3 miles north-east), Trumpethill (3 miles north), Branchton (3 miles north-east), Ashton (3 miles north-east) and Midton (3 miles north-east). Nearby towns on our patch include Greenock (4 miles north-east), Port Glasgow (7 miles east), Cartsdyke (5 miles north-east), Kilmacolm (9 miles east), Mid Auchinleck (8 miles east) and Bogston (7 miles east).
Landmarks near Inverkip
There’s a railway station in Inverkip itself: Inverkip station. Well-known places in the area include Castle House Museum (3.5 miles north-west) and Dunoon Castle (3.4 miles north-west). Green spaces nearby include Creuch Hill and Loch Loskin.
What we are called out for in Inverkip
When a seal departs from its tested detail, the evidence no longer covers it. Gaps beyond the tested size, shallow sealant, no backing where it was needed, or products from different systems mixed together are what we find most often.
Common reasons buildings call us in:
- Seals that don’t match their tested detail
- Fire-rated sealant that has cracked or shrunk back
- Builders’ foam or ordinary silicone in compartment walls
- Seals disturbed by maintenance and left open
For a building such as Inverkip Parish Church, new heating or data runs are the usual reason penetrations need sealing.
Comparing quotes
- Do they follow the manufacturer’s priming guidance?
- Their approach to joint depth and backing
- Who will actually carry out the work
- How they’ll work around occupants
Other services in Inverkip
What sets the cost
There’s no standard rate for sealant work, since sites vary so much. What we look at:
- How accessible the joints are
- Backing rod, priming and other preparation
- Whether old sealant has to be cut out first
- Quantities, in metres or numbers
Every site prices differently: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
What to include in your enquiry
Good information means a firmer quote. Helpful details to send:
- Clear photographs of the problem areas
- Rough lengths or quantities, or drawings if you have them
- Specification clauses that apply
- Anything awkward about access or site hours
Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we’ll return a fixed quote that you can work with. If you have questions first, call the office on 01277 525 020 or email us.
Your questions answered
Is Inverkip too small for you to travel to?
No. Small places get the same service as large ones. We work across every Scottish council area. Where we can, we group nearby jobs to make the most of each trip.
What do Scotland’s building standards say about service penetrations in Inverkip?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. Design sits with the designer and the verifier; installation to the tested detail is our part.
How long does a job like this take?
We plan the time on site around your programme and access. We’ll give you an estimate of time on site when we quote.
How soon can the area be used again?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, so we will confirm the curing time on the day.
Can staff carry on working while you’re here?
Normally, yes. Phased work can be planned so areas stay in use.
Will your applicators have CSCS cards?
Yes. We use CSCS-carded applicators, as many construction sites ask for.
What’s the quickest route to a quote?
The quote form is the simplest route, though you can also call 01277 525 020 or email drawings and photos. Photos, drawings or a joint schedule help us quote quickly.
Different surfaces, different methods
Drylining partitions
Plasterboard partitions are tested as a specific construction. We check that the product’s detail covers that partition type and board thickness first.
Small ducts
Some fire-rated sealant details cover small ducts. Bigger ducts and fire-resisting ductwork are normally handled with other products and we flag that rather than guess.
Leave it or put it right?
Open service penetrations matter on ordinary days, not just in a fire: they also carry noise, draughts and smells between rooms. The specified fire seal closes the gap for all of these, and the other benefits follow. Around smaller places like Inverkip, halls, stores and seasonal buildings may not be checked often, giving water time to get in. Early resealing prevents it.
A quote for service penetrations depends on quantities, condition and access, plus any specification you are working to. Ask us for a fixed quote.
Why us?
- CHAS accredited contractor
- Constructionline member
- Clear, fixed quotes
- One contact handling all your sites
See how commercial sealant jobs are priced or how we’re accredited.