Scotland
Fire Stopping in East Dunbartonshire
We cover 24 towns and villages in East Dunbartonshire for fire stopping, with failed joints always cut out and a 12-month guarantee on our workmanship.
Fire Stopping across East Dunbartonshire
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Where we work in East Dunbartonshire
Fire-rated and intumescent sealing of service penetrations and linear gaps. Pick your town below to see the details for your area, and send details for a fixed quote.
Largest places
Other services in East Dunbartonshire
- Industrial and floor joint sealing
- Construction and new-build mastic
- Coloured and colour-matched sealant
- Facade and window perimeter sealing
- Expansion and movement joint sealing
- Commercial washroom and wet-area sealing
- Mastic sealing for building owners and managing agents
- Commercial sealant contractors
Postcodes in East Dunbartonshire
About fire stopping in East Dunbartonshire
No fire sealant works on its own: the evidence covers a specific product, wall or floor type, service, gap, depth and backing. We match each opening to that detail before any sealant goes in. We work on joints between fire-resisting walls and floors, cable penetrations and pipe penetrations, and the failures we are asked to look at most are unsealed openings around new pipes and cables and openings found when ceilings come down for a refit.
Before we leave any area, the masking comes off, the area is cleaned and every joint is checked with your site contact. Where the sealant needs time to cure before use, we tell you and sign the area.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Pricing in East Dunbartonshire
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well.
Why clients in East Dunbartonshire choose us
- One number for every site we cover
- CHAS accredited
- Products installed to the manufacturer’s instructions
- 12-month guarantee on workmanship
Ask for a quote
Let us know the site, the scope and your timescale, and we’ll put a fixed quote together. The easiest way is to call the office on 01277 525 020 or use the quote form.
Landmarks near Kirkintilloch
We work on buildings around Kirkintilloch, The Kirky Puffer pub and Kirkintilloch High School. For rail, the closest station is Lenzie station, about 0.9 miles south. Nearby you’ll also find Barony Chambers Museum (0.7 miles north-west) and Woodilee Hospital (under half a mile south-east). Open spaces near Kirkintilloch include Gadloch and Bar Hill.
Service penetrations in East Dunbartonshire buildings
From Kirkintilloch, Bearsden and Bishopbriggs to smaller places, buildings across East Dunbartonshire are divided into fire compartments. Where fire-rated sealant is the specified product for a service penetration or linear gap, we install it to the manufacturer’s tested detail.
Work in East Dunbartonshire comes under Scotland’s own building standards and technical handbooks. Our part is sealing to the specification, whatever the building.
Kirkintilloch: Industrial units on estates such as Woodilee Industrial Estate, under half a mile south-east of Kirkintilloch, often separate offices from warehouse space with fire-resisting walls, and new services through them need the specified seal. Hotels such as The Broadcroft Hotel, 0.6 miles to the north-west of Kirkintilloch, rely on fire-resisting walls between bedrooms and corridors, and refits that add services leave penetrations to seal where fire-rated sealant is specified.
When it isn’t the sealant
Part of a good diagnosis is knowing where sealant stops. You’ll hear from us if the cause turns out to be any of the following:
- Deciding what a wall or floor needs, which belongs to the designer
- Plastic pipes whose detail calls for a collar or wrap
- Fire doors, dampers or other fire safety equipment
Looking after the joints
A few simple habits keep the new joints working:
- Ask the designer to confirm details early on refits
- Flag new cables with no seal around them
- Leave fire sealant to cure fully before covering it
- Arrange inspection before areas are covered up
Allow the manufacturer’s stated cure time before boxing in or decorating. Not every fire-rated product can be painted.
Ask every contractor who works in risers or voids to report openings they create. Small habits like this stop openings building up.
What we’re called out for in East Dunbartonshire
Fire stopping can get squeezed at the end of a programme, or done by whoever is on site. That is when untested combinations creep in.
Things that normally lead to an enquiry:
- Service penetrations left open after M&E works
- Openings found when ceilings come down for a refit
- Builders’ foam or ordinary silicone in compartment walls
- Fire stopping installed outside its tested range
What affects the price in East Dunbartonshire
Each job is priced on its own details. The main factors are:
- Induction, permit and paperwork requirements
- Whether old sealant has to be cut out first
- Location, for remote and island sites
- Any access equipment needed
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you’ll have a fixed figure to work with.
Before you send an enquiry
A good diagnosis starts with the right details. Let us know:
- Specification clauses that apply
- Clear photographs of the problem areas
- Whether the building will be occupied during the work
- The postcode of the building
Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we’ll return a fixed quote you can plan around. For a chat about it beforehand, phone 01277 525 020 or send photos by email.
When to bring in a specialist
Redoing a failed joint typically costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Your questions answered
Will you come and look before quoting?
That depends on the size and complexity of the job. Straightforward work can often be priced from photos and measurements, and bigger or more complex jobs typically get a visit.
Will you quote for a small job?
Whatever the size, the process is the same: send details, get a fixed quote, we seal, guaranteed.
What site paperwork can you supply?
Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm them with the quote.
Can you seal any opening with fire-rated sealant?
No. Each fire-rated sealant is tested for particular services, gap sizes and substrates. If an opening falls outside, it needs another solution, as set out by the designer.
How do you choose the sealant?
The specification comes first, if there is one. Without one, the joint decides: its movement, its surfaces and what it has to cope with.
Do you have public liability insurance?
Yes. Mastic Doctor is fully insured, public liability included.
Will you sign off the seals for us?
No. Sign-off belongs to the designer or building control, not the installer. We’ll confirm the products and details used and agree any further records when we quote.