Fire Stopping in Torrance
Fire stopping for Torrance, from a contractor working since 2005. Fully insured and CHAS accredited.
- Service penetrations left open after M&E works
- Fire-rated sealant that has cracked or shrunk back
- Head-of-wall gaps with no fire seal
Fire stopping for businesses in Torrance
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Your questions answered
Is Torrance too small for you to travel to?
Not at all: smaller places are covered as well as towns. We work across every Scottish council area. Where we can, we group nearby jobs to make the most of each trip.
Do you cover business parks and estates near Torrance, such as Strathkelvin Retail Park?
Yes. Estates, retail parks and business parks around Torrance, Strathkelvin Retail Park among them, are all within reach. To start, just call 01277 525 020 or send photos by email with the unit, the joints involved and your access times.
Do you offer coloured sealant?
It depends on the product specified. Some ranges offer many colours, others very few, so we’ll confirm the colours available for the specified product with the quote.
What’s the quickest route to a quote?
It works in four steps: send details, get a quote, we seal, guaranteed. Step one needs little more than photos and a postcode.
What does an EI 60 rating mean?
Penetration seals are tested to BS EN 1366-3 and linear joint seals to BS EN 1366-4. Classification follows BS EN 13501-2. The rating applies to the product as tested.
Do you seal on top of existing sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.
How do you deal with asbestos in old sealant?
The duty to manage asbestos sits with the building’s dutyholder, so for older buildings we ask for the asbestos register first. Work pauses if suspect material is found, until it has been tested.
Fire stopping in Torrance, done properly
Opened ceilings and riser doors often reveal service openings nobody sealed. If a specification already covers those walls and floors, we can reseal to it using the product and detail it sets out. With no specification in place, the first step sits with your designer or fire engineer, not with us. If you are dealing with damaged fire seals in risers and voids and unsealed joints where partitions meet the slab, we can help, on linear gaps at wall heads, joints between fire-resisting walls and floors and cable penetrations alike. Searching for sealant specialists in Torrance? Mastic Doctor has worked for contractors, FMs and building owners since 2005, with CSCS-carded applicators.
Around smaller places such as Torrance, compartment walls and floors tend to be in schools, hotels, care homes and community buildings. Where services pass through, specified fire-rated sealant is installed following the manufacturer’s guidance for that wall or floor.
Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we are upfront about that.
- Where
- Torrance (G64)
- Region
- East Dunbartonshire
- Guarantee
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
When to bring in a specialist
Redoing a failed joint normally costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
Why act early in Torrance
Open penetrations multiply: every new cable or pipe adds another. Keeping on top of it after each round of works keeps the job small, rather than turning into a full building survey and reseal. In Scotland, wind-driven rain finds a failed joint quickly, so it’s worth renewing joints around Torrance before they leak.
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a fixed quote.
Why us?
- Our applicators hold CSCS cards
- A fixed quote before work starts
- Fully insured
- CHAS accredited contractor
See how commercial sealant jobs are priced or our accreditations and insurance.
How the job changes by surface
Cables and cable bundles
Single cables and small bundles are often within a fire-rated sealant’s tested detail. The detail limits bundle size and the gaps between and around cables and we work within those limits.
Masonry and concrete
Core-drilled holes are neat; broken-out ones rarely are. The gap is measured at the widest point against the detail’s limits.
Towns and villages near Torrance
What else we do in Torrance
From enquiry to sign-off
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Joint faces are cleaned back to sound, dry surfaces, primer goes on where the manufacturer specifies it, and each bead is tooled to a neat concave finish. Where we can, we combine work around Torrance with other jobs nearby, to make the most of each trip. Let us know if your dates have any give.
- We read the specification, drawings or penetration schedule you send.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Getting the site ready
- Let building users know which areas are affected
- Let us know about inductions and permits
- Share your working hours and any access restrictions
Getting a fixed quote
For a fixed quote, call the office on 01277 525 020 or send photos by email. You can also send details through our quote form.
Advice
Signs you need fire stopping in Torrance
Some service penetrations were never sealed at all, often hidden above suspended ceilings or behind boxing. Inspections, refurbishments and ceiling access usually bring them to light.
Common reasons buildings call us in:
- Unsealed openings around new pipes and cables
- Fire-rated sealant that has cracked or shrunk back
- Damaged fire seals in risers and voids
- Hidden openings found during inspections
At a college such as New College Lanarkshire - Kirkintilloch Campus (2.1 miles east of Torrance), checking penetration seals after summer M&E works is good practice.
What your quote should include
- What site paperwork they can supply
- Will failed sealant be removed rather than covered?
- Their public liability cover
- The named product and why it was chosen
Fire stopping around Torrance: what changes locally
Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, and products should be tested for their end use. Our part is installing the specified fire-rated sealant to its tested detail.
At a retail site such as Strathkelvin Retail Park, which lies south of Torrance, walls between units may be fire-resisting, so services added in a refit need the specified seal. At a university such as University of Strathclyde, which lies south of Torrance, labs, lecture blocks and residences are re-serviced often, so penetration seals are best checked after M&E work.
Torrance is about 2 miles north of Bishopbriggs, in East Dunbartonshire. We cover Torrance, with the same fixed quotes and 12-month guarantee as everywhere else. Across East Dunbartonshire, 24 places are covered, Torrance among them. Our Glasgow page has more on work in that area.
Work on service penetrations is covered throughout G64, for business premises of every kind. Streets here include Main Street, Michael Mcparland Drive and John Mcewan Way, and sites on any of them can send details for a fixed quote. Just outside Torrance, we also work in Balmore (1 mile west), Cadder (1 mile south), Bardowie (2 miles west), Bishopbriggs (2 miles south) and Baldernock (3 miles west). Bigger towns within reach include Kirkintilloch (3 miles east), Bearsden (5 miles west), Lenzie (3 miles south-east), Milngavie (4 miles west), Westerton (5 miles south-west) and Colston (3 miles south).
Landmarks near Torrance
Torrance’s nearest station is Bishopbriggs station, roughly 2.5 miles south. Nearby you will also find Broomhill Hospital (2.5 miles east) and Kirkintilloch Castle (2 miles east). The countryside around Torrance includes Bardowie Loch and Lenzie Moss.
Maintenance after handover
Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. Our advice:
- Foam or ordinary sealant is never a fire-seal repair
- Flag new cables with no seal around them
- Brief every trade that openings they make must be sealed
- Leave fire sealant to cure fully before covering it
Keep the product data and installation details with the building’s fire safety information. It makes later repairs much easier to match.
On fit-outs, get the fire-stopping specification agreed before the services go in. Details can then be picked to suit the actual pipes, cables and ducts, and installation follows the programme.