Industrial and floor joint sealing in Arden, Glasgow
Our CSCS-carded applicators take on floor joint sealing and filling in warehouses, factories and industrial units in Arden and the surrounding area. Send photos or drawings for a fixed quote.
- Joint edges breaking up under truck wheels
- Scruffy, dirty joint lines on a shop or showroom floor
- Filler that has parted from one face
Floor joint sealing in Arden
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
How the quote is worked out
Quotes vary with the job. Expect it to depend on:
- Location, for remote and island sites
- How accessible the joints are
- How much existing material needs removing
- How much there is to seal
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you will have a fixed figure to work with.
Details that help us quote
A few photographs plus some basic facts will normally do. It helps to include:
- Your programme or deadline
- The type of building and who uses it
- Drawings or a marked-up plan, if available
- The site address and postcode
Let us know the site, the scope and your timescale, and we will put a fixed quote together. To get it moving, give us a call on 01277 525 020 or email us.
Floor joint sealing in Arden
Mastic Doctor has worked on joints in commercial buildings for over 20 years. Applicators carry CSCS cards and work to your site rules, and we are CHAS accredited and a Constructionline member holding public liability insurance. Completed joints come with a 12-month guarantee on our workmanship. If you’re dealing with drivers complaining about joints on a route and dock area joints that have failed first, we can help, on construction joints, retail and showroom floors and joints along racking aisles alike. A specialist sealant contractor works differently from a general builder: on jobs in Arden, preparation and product choice get the time they need.
Older stone buildings in Scotland’s cities often have later extensions, with movement joints where old meets new. They need the right movement class and correct width and depth to last.
Every job we finish is backed by a 12-month workmanship guarantee, in Arden as everywhere else we work. If our installation lets you down in that time, we return and fix it.
- Where
- Arden (G46, G53, G43)
- Wider area
- Glasgow
- Cover
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Questions we’re asked in Arden
Is hospital work, at somewhere like Leverndale Hospital, something you do?
Yes, provided the work is planned with the site’s estates team. Work is phased so departments keep running, under the site’s own rules.
Do you cover business parks and estates near Arden, such as Thornliebank Industrial Estate?
Yes. We cover Arden and the area around it, including industrial estates, business parks and retail parks such as Thornliebank Industrial Estate. To start, just give us a call on 01277 525 020 or send details through our quote form with the unit, the joints involved and your access times.
How long does a typical visit take?
That varies with the scale of the job, but the work usually takes anything from a day for one loading bay to several days for a large floor, split into phases. For bigger or phased jobs, we will set out a timescale with the quote.
Can you follow the specification on our project?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and any queries are raised before we start.
What about RAMS and site documents?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we’ll confirm with the quote.
How long will the new sealant last?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Treat them as maintenance items and inspect them regularly.
Do you offer coloured sealant?
It depends on the product specified. Some ranges offer many colours, others very few, so the available colours are confirmed with the quote.
Building owners, agents and FMs in Arden
Planned maintenance programmes are welcome: working through a building or an estate in stages that fit your budget. Arden can form part of a wider programme.
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
After the work
To get the most from the new sealant:
- Make joint checks part of your floor inspections
- Keep grit out of unfilled joints in the meantime
- Respect the cure time before traffic returns
- Record damaged joints with a photo and a location
If a joint we filled starts to break up within 12 months, tell us and we’ll arrange a look. Beyond that, an inspection once or twice a year catches failing joints early.
While the concrete edges are intact, it’s a filling job. Once they have broken away, edge repair comes first and that takes longer and closes areas for longer.
Should maintenance staff do it?
Redoing a failed joint normally costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Warehouse floors and decks around Arden
Arden is in the west of Scotland, the wetter side of the country. Rainwater through open yard and deck joints is a bigger issue here than in the drier east. Dry spells are used for the external joints. Arden has at least three named business or industrial parks inside a 3-mile radius. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic.
A campus such as University of Glasgow Gilmorehill Campus (to the north of Arden) has long runs of movement joint in its buildings, decks and paving. Hospital campuses such as Leverndale Hospital (2.3 miles north-west of Arden) grow in stages, leaving movement joints wherever new blocks meet old. If you manage units on an estate such as Thornliebank Industrial Estate, less than half a mile south-east of Arden, the floor joints under forklifts and pallet trucks and the slab joints in the yard are the ones to watch.
Arden is about 2 miles north-west of Giffnock, in Glasgow. We cover Arden and the rest of Glasgow, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across Glasgow, 171 places are covered, Arden among them.
We cover the G46, G53 and G43 postcode districts. We cover commercial and managed buildings on Skibo Lane, Kilmuir Road and Hopeman Road. We also cover Carnwadric (1 mile east), Kennishead (1 mile north-east), Southpark Village (1 mile south-west), Darnley (1 mile west) and Thornliebank (1 mile south-east) for floor joints. Nearby towns on our patch include Glasgow (4 miles north-east), Hillhead (5 miles north), Dowanhill (5 miles north), Woodlands (5 miles north-east), Woodside (5 miles north-east) and North Kelvinside (5 miles north-east).
Local landmarks in Arden
In Arden, that means premises near Rouken Glen, among other places. There’s a railway station in Arden itself: Kennishead station. Well-known places in the area include Silverburn Shopping Centre (1 mile north) and Pollock Castle (2 miles south-west). Green spaces nearby include Neilston Pad and Brother Loch.
Surface by surface
Loading bays and dock areas
Bays can be treated one or two at a time so goods in and out carry on. Tell us your site hours and access windows and we’ll plan around them.
Flexible floor sealants
Movement joints, joints at walls and joints in lightly trafficked areas often take a flexible sealant. Closed-cell backing rod goes in first, keeping the bead shallow and gripping only the two faces.
Also in Arden
Diagnose, treat, sign off
We begin with a short walk round with whoever looks after the building, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. For premises in Arden, tell us about access times, shared entrances and any building rules, so the work can be phased and areas kept in use.
- First, the zones and order of work are agreed with you.
- Any joints with broken edges are flagged before work starts.
- Failed material and debris are removed and the joint cleaned.
- We fill the joints with the agreed product, finished level.
- Each area is handed back when ready for traffic.
Getting the site ready
- Have the specification and drawings to hand
- Send your site hours and access windows
- Point out parking and an unloading spot
Request a quote
The quickest route to a quote is a few photos and the site postcode. Upload them with the quote form, or call the office on 01277 525 020 or email drawings and photos if you’d rather talk the job through.