Facade and window perimeter sealing in Vidlin, Shetland Islands
Work needed on a facade joint in Vidlin? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Failed seals around shopfront and entrance frames
- Patch repairs that keep failing
- Weathered facade joints that have lost their grip
Facade sealing for Vidlin sites
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
About our facade sealing in Vidlin
Our facade sealing work covers external facade joints, window and door perimeters, cladding panel joints and the perimeter joints where frames meet the structure on commercial buildings in Vidlin. Coping and flashing joints are included where sealant is the specified fix. We work on coping and flashing joints, window and door perimeters and stone and brick facade joints, and the usual reasons a site gets in touch are patch repairs that keep failing and sealant pulling away from frames or panels. Whoever orders the work in Vidlin, the brief is usually the same: a clear scope, tidy work and joints that don’t fail again.
For a site around Vidlin, we plan the mastic in as few trips as the programme allows. Send drawings, photographs and the programme so everything needed arrives on the first day.
We stand behind the joints we seal with a 12-month guarantee. That covers our preparation and application, and if something we did falls short, we return to it.
- Place
- Vidlin (ZE2)
- Wider area
- Shetland Islands
- Guarantee
- A 12-month guarantee
- Quote
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Page updated
- 3 November 2026
How the job changes by surface
Cladding panel joints
On sealed panel systems, every joint keeps water out. We cut out failed joints along their full length and rebuild them with backing and a facade-grade sealant.
Render and coated surfaces
Paintable sealants exist for joints that will be coated. The choice depends on the specification and finish.
FAQs: Vidlin
Can you keep pace with our programme in Vidlin?
Yes. Send the programme and drawings, and we will plan the mastic to suit the stages. Tell us which site documents you need, such as RAMS, our insurance certificate or CSCS details, and they’re confirmed with the quote.
Can being near the sea in Vidlin affect the sealant we need?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. Product choice and preparation matter more, and sea-facing elevations are worth inspecting more often.
Do you offer coloured sealant?
It depends on the product. Some ranges offer many colours, others very few, so we’ll confirm the colours available for the specified product with the quote.
Will rain stop the work?
We can work through the year, but sealant needs a dry joint and temperatures within the product’s range. Frost and condensation on glass and steel are common on winter mornings, and we build that into the programme.
Is Vidlin in your area?
Yes. We cover Vidlin, and the simplest way to start is to call 01277 525 020 or email the details over.
Do you take on small jobs?
Small jobs are welcome alongside larger packages. Send details for a fixed quote.
How do we ask for a quote?
The quote form is the simplest route, though you can also ring 01277 525 020 or email us. Photos, drawings or a joint schedule help us quote quickly.
What we’re called out for in Vidlin
Sun, rain and temperature swings wear facade sealant down over the years. UV and weather harden the sealant until it can’t stretch with the building, and cracks or adhesion loss follow.
Site and facilities staff are often the first to spot these:
- Patch repairs that keep failing
- Water coming in around window frames
- Hard, chalky sealant that no longer flexes
- Facade joints cracked through the middle
A facade joint near Vidlin lasts when width, depth and backing are right, not just the finish.
What your quote should include
- Who will actually carry out the work
- Whether old or failed sealant will be cut out, not overlaid
- Proof of insurance
- What site paperwork they can supply
Owners, agents and contractors
Housing associations and managing agents often need work done across blocks and communal areas. We phase the work so people keep access, and each stage is agreed with your contact.
Hospitality, education, healthcare, office and retail clients book us directly too. We plan around the way the building is used, so the building keeps working while we do.
How a job runs
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. The work itself typically takes a day or two for a few elevations, and longer where access has to be moved around the building, and we clear our waste as we work. Travel to smaller Scottish places like Vidlin is planned so the job is finished in one visit where possible, which is why we ask for photographs and a full list first. Outside work also needs a suitable weather window.
- We plan access and the order of elevations with the client.
- Weather and temperature are checked against the product’s limits.
- We remove the old bead and check the edges are sound.
- Faces are cleaned, primed where needed and backed.
- Sealant is gunned in and tooled hard onto both faces.
- Once signed off, the work carries our 12-month guarantee.
Getting the site ready
- Point out parking and an unloading spot
- Confirm the product named in the specification
- Share the asbestos register for older buildings
Request a quote
For a fixed quote, call the office on 01277 525 020 or email a schedule or drawings. Our quote form is another easy route.
Read more
Site staff or a sealant specialist?
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
After the work
To get the most from the new sealant:
- Keep sills, gutters and drainage paths clear
- Check the asbestos register before old mastic is disturbed
- Keep pressure washers away from fresh sealant
- Inspect facade joints on a regular cycle
Record the sealant type and date on the building file. Future work can then match the product and colour without guesswork.
Deal with sections that fail early as soon as they show. A few metres resealed promptly can stop water damage spreading.
Building and refurbishing in Vidlin
Vidlin lies within about 1 mile of the sea. Schemes this close to the sea see their facade joints tested by wind and rain from the day they’re sealed, so we check the specified product suits the exposure before the first bead. For an island location such as Vidlin, work is planned around ferry crossings and the weather. We need drawings and a programme early so materials come on the right crossing.
Sites around Vidlin get mastic sealed to the drawings and the programme, nothing improvised.
Vidlin is in the Shetland Islands. Looking for facade sealing in Vidlin? We can help, as we do across the Shetland Islands. We work across 63 places in the Shetland Islands, large and small.
Work on facade joints is covered throughout ZE2. Close to Vidlin, our area also takes in Dury (4 miles south), Hamister (4 miles east), Voe (4 miles west), Symbister (4 miles south-east) and Sandwick (4 miles south-east). For island and remote sites, travel and materials need planning ahead, so the full address helps from the start.
Around Vidlin
Other landmarks nearby include The Cabin Museum (1.5 miles south-west). Open spaces near Vidlin include Kirkhouse Loch and Setter Hill.