Clate facade sealing
Looking for facade sealing in Clate? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Perimeter joints where frames meet the structure
- Previous reseals run over old sealant
- Old perimeter mastic that has dried out
Facade sealing for Clate sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
How we handle facade sealing in Clate
Every facade quote starts with how the joints will be reached. Let us know what access exists or is planned, and any site rules we need to work around, so the price covers the real job. The enquiries we see most involve cold air coming in at window perimeters and weathered facade joints that have lost their grip, on window and door perimeters, perimeter joints where frames meet the structure and cladding panel joints. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Clate is the same: the right product in a properly prepared joint.
For a site around Clate, we plan the mastic in as few trips as the programme allows. Clear drawings, a programme and photos let us bring the right sealants, primers and backing rod first time.
We sign every job off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Location
- Clate (ZE2)
- Region
- Shetland Islands
- Guarantee
- 12 months on our workmanship
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
From enquiry to sign-off
Before we leave any area, the masking comes off, the area is cleaned and every joint is checked. Where the sealant needs time to cure before use, we tell you and sign the area. Tell us who will meet us and how to get in at your building near Clate. That goes into the plan alongside the quote.
- We look at the joints, the drawings and the access before pricing.
- Failed sealant is cut out along its full length.
- Joint faces are cleaned to firm, sound material, with primer where the sealant maker specifies it.
- Closed-cell rod fixes the depth, and the sealant grips two sides only.
- The new sealant goes in and is tooled firmly onto both faces.
- We walk the finished joints with you before handing over.
Getting the site ready
- Confirm the product named in the specification
- Share the asbestos register for older buildings
- Tell us your opening times and when work is allowed
Getting a fixed quote
Need a figure for a tender or a budget? We’ll quote against your scope and drawings that you can work with. If you have questions first, call the office on 01277 525 020 or email a schedule or drawings.
Read more
Quoting for work in Clate
Each job is priced on its own details. The things that drive the figure:
- How accessible the joints are
- The size and state of each joint
- Distance, for remote addresses
- How much existing material needs removing
We don’t publish prices, since every building and every scope is different. For a fixed figure, call for a quote and we’ll price your job on its own details.
What we need to price the job
A good diagnosis starts with the right details. Let us know:
- When you need the work done
- A wide shot and a close-up of the area
- The postcode of the building
- Specification clauses that apply
A handful of photographs and a postcode is the fastest way to a quote. Upload them with the quote form, or phone 01277 525 020 or email us if you’d rather talk the job through.
Facade sealing around Clate: what changes locally
With the shore within about 1 mile, Clate counts as a coastal location. On a coastal site, facade and perimeter joints face driven rain and, closer to the beach, salt, so we check the specified product suits the exposure before the first bead. Clate is in the east of Scotland, which is drier than the west. Cold, damp starts still stop external sealing on some days. External dates keep a little give.
On any site in or around Clate, the mastic follows the specification and the programme. Window perimeters and facade joints around Clate need correct width, depth and backing rod as much as a neat finish.
Clate is about 13 miles north of Lerwick, in the Shetland Islands. Businesses, contractors and managing agents in Clate use us for work on facade joints, as part of our coverage of the Shetland Islands. 63 places across the Shetland Islands fall within our area, including Clate.
Business premises anywhere in ZE2 are within our area. Among the streets we cover are Rocky Road and Harlsdale. We also cover Sandwick (1 mile north), Symbister (1 mile north), Hamister (1 mile north), Huxter (1 mile east) and Tripwell (2 miles north-east). Bigger towns within reach include Lerwick (13 miles south), Sound (14 miles south) and Brae (12 miles west). Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you call the office on 01277 525 020 or email us.
Around Clate
The countryside around Clate includes Loch of Sandwick and Ward of Clett.
Questions about Clate
Does a coastal location like Clate affect which sealant is used?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. We check the specified product suits the exposure and pay close attention to preparation.
Do you work on the island where Clate is?
Yes. Islands are part of our area, Clate included. Ferry times and the weather set the plan, so we ask for photos and a full list first.
Do you offer coloured sealant?
That depends on the product. Some ranges are wide, others limited, so we will confirm the colours available for the specified product with the quote.
Is your workmanship covered by a guarantee?
Yes, for 12 months. If our installation fails in that time, we return and fix it.
Who decides which product is used?
The specification comes first, if there is one. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Can you quote from photos?
It depends on the job. Straightforward work can often be priced from photos and measurements, and bigger or more complex jobs typically get a visit.
Do you have public liability insurance?
Yes. Our insurance certificate can be sent alongside the quote.
Site staff or a sealant specialist?
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
Some joints are best left to specialists: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
Looking after the joints
Sealant joints are maintenance items, and their life depends on movement, exposure, cleaning and use. Our advice:
- Brief window cleaners about newly sealed joints
- Note when each elevation was last resealed
- Avoid patch repairs on failed facade joints
- Inspect facade joints on a regular cycle
Let the new sealant cure before washing the facade or windows near it. Pressure washers and harsh cleaners can damage a fresh bead, so brief your window cleaners.
Don’t wait for a full elevation to fail. Small repairs stop small leaks becoming large ones behind the facade.
Other services in Clate
Why deal with it now?
If access is already up for other work, resealing at the same time makes sense. Combine it with planned external works and you only arrange access once. Around smaller places like Clate, halls, stores and seasonal buildings may not be checked often, giving water time to get in. Resealing early avoids that.
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
Why appoint us
- Constructionline member for supplier checks
- Our applicators hold CSCS cards
- Specification-led, product-correct work
- Coloured sealants to suit the setting, where available
Take a look at how commercial sealant jobs are priced or how we’re accredited.
When it isn’t the sealant
Not every problem is a sealant problem, and we’d rather tell you before you spend money. These need a different solution:
- Joints too narrow for the movement they take, which need redesign
- Providing access systems for the work
- Damp caused by condensation inside the building
Not sure which it is? You can give us a call on 01277 525 020 or email us and we’ll tell you honestly.
Where we work in Clate
- Perimeter joints where frames meet the structure
- Cladding panel joints
- Coping and flashing joints
- Window and door perimeters
- Stone and brick facade joints
- Shopfront frames