Facade and window perimeter sealing in Inch, Edinburgh
Planning work on a facade joint in Inch? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Perimeter sealant that has split or peeled away
- Discoloured or dirty facade joints
- Draughts around frames and panels
Facade sealing across Inch
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Site staff or a sealant specialist?
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Facade sealing for commercial buildings in Inch
We seal window and door perimeters, cladding panel joints, external facade joints and perimeter joints where frames meet the structure. Coping and flashing joints are included where sealant is the specified fix. If you have perimeter joints where frames meet the structure and draughts around frames and panels, we can help, whatever the surface. One point of contact handles commercial sealant work in Inch from the first photos to the final walk-round, whether it’s one building or several.
Where new frames meet sandstone or granite in a Scottish city, the sealant has to suit the stone: the right primer, a neutral-cure sealant and a colour that blends. That holds on a tenement as much as on a city-centre office.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Location
- Inch (EH16, EH17, EH9)
- Region
- Edinburgh
- Guarantee
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
From enquiry to sign-off
At the end of each section, we remove the tape, clean down and inspect every joint, ready for your sign-off. Where the sealant needs time to cure before use, we tell you and sign the area. For premises in Inch, tell us about access times, shared entrances and any building rules, so the work can be phased and areas kept in use.
- We start with photos, drawings or a visit to see the joints and agree access.
- We confirm the joint type, movement and the specified product.
- The existing bead comes out in full.
- Primer is applied where the maker specifies it.
- Backing rod is fitted and the new sealant gunned in and tooled.
- We go over the completed work with you before leaving.
Getting the site ready
- Explain the parking and delivery arrangements
- Have the specification and drawings to hand
- Tell us your opening times and when work is allowed
Request a quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to call the office on 01277 525 020 or send photos by email with what you know.
Read more
Towns and villages near Inch
What else we do in Inch
Questions we’re asked in Inch
Do you cover business parks and estates near Inch, such as Peffermill Industrial Estate?
Yes. Estates, retail parks and business parks around Inch, Peffermill Industrial Estate among them, are all within reach. A few photographs and the unit address let us price the work.
How is mastic work on a tenement’s shared parts in Inch typically organised?
Typically through the property factor, once the owners have agreed. One quote can cover a close or the whole block.
Do you work to architects’ specifications?
Yes. Send it with your enquiry, and the quote will be based on it, flagging anything that needs clarifying.
Do your applicators hold CSCS cards?
Yes. We use CSCS-carded applicators.
How much does the work cost?
It depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a quote and we’ll price it properly.
How many days will you need on site?
The duration is planned around your programme and the access we’re given. You will have an expected duration with the quote.
Do you guarantee your work?
Yes, for 12 months. If a joint fails because of how we installed it, we come back and put it right.
Honest limits
Our job is the joint, not everything around it. Sealant alone won’t deal with:
- Render or concrete edges that have broken away
- Damp caused by condensation inside the building
- Joints too narrow for the movement they take, which need redesign
Not sure which it is? You can phone 01277 525 020 or send details through our quote form and we will tell you honestly.
What we seal
- Perimeter joints where frames meet the structure
- Shopfront frames
- Cladding panel joints
- Stone and brick facade joints
- Coping and flashing joints
- Window and door perimeters
Facade sealing in Inch: the local picture
With the shore within about 3 miles, Inch counts as a coastal location. Schemes this close to the sea see their facade joints tested by wind and rain from the day they’re sealed, and the sealant, primer and backing need choosing with that in mind. Scotland has its own building regulations, and in Inch warrants come from the local authority verifier. The mastic package follows the approved specification.
Hotel extensions and refits, at places such as Northumberland Hotel (0.6 miles north-west of Inch), typically run between busy periods, so the sealing is squeezed into short windows. University estates such as University of Edinburgh - Little France Campus (0.7 miles east of Inch) tend to have a rolling programme of new buildings and refurbishments, each with window perimeters and facade joints to seal. For contractors at a college like Edinburgh College - Milton Road Campus, which lies north-east of Inch, perimeters and internal sealant are timed for the holidays.
Inch is about 2 miles south-east of Edinburgh, in Edinburgh. We cover Inch, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across Edinburgh, 174 places are covered, Inch among them.
Anyone looking for facade sealing in EH16, EH17 and EH9 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. For a building on Ross Road, Lady Road and Orrok Lane or nearby, send details and we’ll quote for facade joints. Nearby places we also cover include Bridge End (1 mile north), Cameron Toll (1 mile north-west), Liberton (1 mile south-west), Little France (1 mile east) and Prestonfield (1 mile north). Further afield, our area takes in Leith (4 miles north), Bonnington (3 miles north), Greenside (3 miles north-west), Broughton (3 miles north-west), Bellevue (3 miles north-west) and Silvermills (3 miles north-west).
Around Inch
Around Inch, our work takes us to commercial buildings near St Margaret's School and Inch Park. For rail, the closest station is Edinburgh Waverley station, about 2.5 miles north-west. Nearby you will also find Royal Infirmary of Edinburgh (0.7 miles east) and Cameron Toll Shopping Centre (0.5 miles north-west). Not far away are The New Leaf Co-op and Duddingston Loch.
After the work
Problems stay small when the joints are checked regularly. Specifically:
- Add perimeter sealant to planned maintenance checks
- Never let anyone seal over old sealant
- Investigate damp beside windows promptly
- Plan facade sealing alongside redecoration
Anything drilled through a facade joint breaks the seal. Ask the installer to reseal it properly.
Building facade joints into a maintenance cycle avoids emergency repairs. Regular checks let you renew joints before water gets in, rather than waiting for a ceiling stain.
Different surfaces, different methods
Window and door perimeters
Frame materials vary, and so does the preparation. We clean and prime to the sealant maker’s guidance for each surface.
Render and coated surfaces
Rendered and painted facades need a sound edge for the sealant to bond to. Loose coatings are cleaned back first, and we’ll mention any edges that need repair.
Work for main contractors and building owners
We work for building owners and managing agents on sealant work across single buildings or whole portfolios. Several sites can go on one quote, so there’s one set of paperwork to deal with.
Main contractors use us as their sealant subcontractor on new-build and refurbishment projects. We work to your programme, your specification and your site rules, with CSCS-carded applicators on site.