Inch expansion joint sealing
Expansion and movement joint sealing in walls, decks and floors throughout Inch and nearby, by CSCS-carded applicators. CHAS accredited and fully insured.
- Spalled or broken joint edges in floors and decks
- Joints where the bead has lost adhesion
- Layers of sealant in a movement joint
Expansion joint sealing in Inch
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Building owners, agents and FMs in Inch
Hotels, schools, healthcare sites, offices and retail units book us directly too. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.
Expansion joint sealing for commercial buildings in Inch
Buildings and slabs are never completely still: they expand in the heat, shrink as they dry, and shift under load. Movement joints are where that movement is absorbed and the seal across each one keeps out water and grit. We seal and reseal movement joints in walls, panels, decks and floors for buildings in Inch. If you’re dealing with sealant peeling off one face of the joint and expansion joints split through the centre of the bead, we can put it right, on precast concrete panel joints, car park decks and ramps and cladding panel joints alike. Facilities teams, main contractors and managing agents in Inch tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
In Scotland’s cities, buildings from car parks and malls to university and hospital estates rely on movement joints. Failed joints let water in, and repeated frost then works on the edges.
Work we carry out in Edinburgh comes with a 12-month guarantee. Should something we installed fail, call 01277 525 020 or send photos by email and we will come back to it.
- Where
- Inch (EH16, EH17, EH9)
- Wider area
- Edinburgh
- Cover
- 12 months on every job
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Your questions answered
Would you work within a site like Royal Hospital for Children and Young People?
Yes. Healthcare sites are among the places we work. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Our building in Inch is near the coast: does that change the sealant?
It can. Coastal exposure works external joints harder than inland weather. Product choice and preparation matter more, and sea-facing elevations are worth inspecting more often.
Can the building stay open while you work?
Typically, yes. We phase the work so most of the building stays in use, with each area protected and signed.
How do we ask for a quote?
The quote form is the simplest route, though you can also speak to us on 01277 525 020 or email us. Include photographs or drawings if you have them.
Are you CHAS accredited and on Constructionline?
Yes. We are CHAS accredited, we are a Constructionline member and we use CSCS-carded applicators.
Do you seal on top of existing sealant?
No, never. Overlaying old sealant is a frequent cause of early failure, so it all comes out first.
Do you take on multi-site work?
Yes. We take on portfolio and planned maintenance work, with each site phased to suit its occupants.
After the work
Regular inspection catches problems early. In particular:
- Plan racking layouts so feet don’t land on a joint
- Include every elevation and deck joint in periodic inspections
- Raise snow-clearing blades over deck joints where possible
- Clear dirt from joint lines during routine cleaning
Grit is the slow enemy of a joint seal. Grit trodden or driven into the joint works at the surface until it tears, especially on car park decks and warehouse floors. Regular sweeping keeps joint lines clear.
Floor joints with failed fillers break up quickly under wheels. Broken arrises jolt trucks, loads and drivers and the broken length grows with every pass. Keeping the filler or sealant sound protects the floor.
On site: what to expect
Inspect, seal, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then the work is carried out to the specified product and detail, and we finish with a walk round so the work can be signed off. University, hospital and office estates in Scotland’s cities have their own permits, inductions and sign-in rules. Tell us the rules and we will work to them.
- We assess the joints on site or from photos, noting widths and how each has failed.
- A fixed quote names the sealant we propose and its movement class.
- Where areas have to stay open, we agree a phased sequence before starting.
- We strip the old sealant or filler and prepare each face until it’s sound and dry.
- Depth is controlled with backing, the faces are primed where the maker calls for it, then the bead is laid and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
Before we start on site
- Tell us which areas need to stay in use
- Explain the parking and delivery arrangements
- For older buildings, check the asbestos register before work
Request a quote
A handful of photos and a postcode is the fastest way to a quote. Upload them with the quote form, or speak to us on 01277 525 020 or use the quote form if you’d rather talk the job through.
Advice
Surface by surface
Car park decks and ramps
Car park joints are some of the hardest-working joints in any building. A trafficable sealant suited to the movement goes in with bays done in phases so the car park keeps running.
Internal floor movement joints
Warehouse and retail floors have saw-cut induced joints and construction joints. Trafficked floor joints often get a semi-rigid filler, with a flexible sealant where movement is larger.
Traffic, movement and joints around Inch
With the shore within about 3 miles, Inch counts as a coastal location. Near the sea, external slabs, ramps and decks see salt air and driven rain as well as their usual loads, so a failed joint lets more in and the edges break up sooner. Inch is on Scotland’s drier eastern side. Frost and de-icing salt still find their way into open external joints. Sealing them before winter limits the damage.
Estates like Peffermill Industrial Estate (to the north-east of Inch) combine warehouse slabs, yards and loading bays, all with joints under wheels. For an estate such as Royal Hospital for Children and Young People (0.6 miles east of Inch), the joints in ramps, decks and long building elevations all need attention over time. Centres like Cameron Toll Shopping Centre (0.5 miles north-west of Inch) have mall floors and service decks whose joints carry steady traffic.
Inch is about 2 miles south-east of Edinburgh, in Edinburgh. Our applicators travel to Inch for work on movement joints. Inch is one of 174 places in Edinburgh on our list for movement joints.
Business premises anywhere in EH16, EH17 and EH9 are within our area for movement joints. Among the streets we cover are Ross Road, Lady Road and Orrok Lane. Nearby places we also cover include Bridge End (1 mile north), Cameron Toll (1 mile north-west), Liberton (1 mile south-west), Little France (1 mile east) and Prestonfield (1 mile north) for movement joints. A short drive away, we cover Leith (4 miles north), Bonnington (3 miles north), Greenside (3 miles north-west), Broughton (3 miles north-west), Bellevue (3 miles north-west) and Silvermills (3 miles north-west).
Landmarks near Inch
Locally, jobs take us to sites close to St Margaret's School and Inch Park and the streets around them. The closest station to Inch is Edinburgh Waverley station, roughly 2.5 miles north-west of the centre. Well-known places in the area include Royal Infirmary of Edinburgh (0.7 miles east) and Cameron Toll Shopping Centre (0.5 miles north-west). Open spaces near Inch include The New Leaf Co-op and Duddingston Loch.
Nearby places to Inch
Also in Inch
What affects the price in Inch
Each job is priced on its own details. The main factors are:
- Removal of failed or old sealant
- Site requirements such as inductions and permits
- Which sealant the job calls for
- Any access equipment needed
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
What to include in your enquiry
To price the job accurately, we need to understand the site. Useful things to include:
- Specification clauses that apply
- Photos of the joints, close up and from further back
- The asbestos register, for older buildings
- Drawings or a marked-up plan, if available
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price the work to it. Smaller jobs need nothing more than photographs and a few notes.
Site staff or a sealant specialist?
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Some joints are best left to specialists: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong normally costs more in the end than doing them right.