Expansion and movement joint sealing in Sandness, Shetland Islands
Expansion and movement joint sealing in walls, decks and floors in Sandness and across the Shetland Islands. CHAS accredited and fully insured, with a 12-month guarantee.
- Water getting into the wall through a failed joint
- Joints packed with grit and debris
- Hardened, cracked sealant on exposed facades
Need expansion joint sealing in Sandness?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Leave it or put it right?
Some quotes just add sealant over the old bead. A bead laid on top of the failed one neither grips nor flexes properly. Full removal and preparation is in every quote. Renewing every failing joint on one visit is the sensible approach for a place like Sandness. Send photos and we’ll quote for everything together.
Pricing movement joints depends on quantities, condition and access, and any specification that applies. Call for a quote.
Why us?
- Clear, fixed quotes
- Public liability insurance in place
- Constructionline member for supplier checks
- Colours chosen to suit frames, cladding or finishes where possible
Take a look at our cost guide or our accreditations and insurance.
About our expansion joint sealing in Sandness
We cover the full range of movement joints: brickwork and blockwork joints, precast and cladding panel joints, concrete joints, car park decks and ramps, podiums and floor movement joints. The product depends on the movement, the weather and anything that runs over it. If you have arrises breaking up along floor joints and damp inside where a wall movement joint has failed, we can put it right, whatever the surface. Most enquiries from Sandness start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Weather windows decide external joint work around a place like Sandness: dry faces and the right temperature are essential, so dates have some give. Internal floors can be done whenever suits the site.
Every job we finish is backed by a 12-month workmanship guarantee. If our installation lets you down in that time, we return and fix it.
- Where
- Sandness (ZE2)
- Wider area
- Shetland Islands
- Cover
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
FAQs: Sandness
Can you take on a job in Sandness, on the island?
Yes. We cover the whole of Scotland, and that includes island locations such as Sandness. Ferry times and the weather set the plan, so we ask for photos and a full list first.
Must our site in Sandness stop work while the joints are done?
In most cases the site keeps working. Joints are done in phases, a bay, aisle or deck at a time. The phasing plan comes with the quote.
Do the joint edges need to be sound before sealing?
Sound edges are essential. Where they’ve broken up, we will tell you they need repairing first so you are not paying for a bead that won’t hold.
What happens if it rains on the day?
Sealing onto a damp surface leads to adhesion failure. We agree a revised date with you.
How much does the work cost?
Each job is quoted on its own details. For yours, give us a call on 01277 525 020 or email the details over.
What timescale should we allow for resealing expansion joints?
Allow anything from part of a day to a couple of weeks, depending on joint lengths, widths and access. Timings are set out in the quote.
Are your applicators CSCS-carded?
Yes. Should the site need card details in advance, tell us and we’ll confirm them with the quote.
Floors, slabs and movement joints in Sandness
With the shore within about 1 mile, Sandness counts as a coastal location. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, which is why split joints are worth sealing before the edges deteriorate. Sandness is on Scotland’s drier eastern side. Freezing weather and salt still attack open external joints. Resealing before the cold months helps protect the edges.
A joint near Sandness that has lost its sealant lets in water and grit, and the edges suffer next; we will tell you if the edges need repairing first.
Sandness is in the Shetland Islands. We cover commercial sites throughout Sandness, whether it’s a single job or part of a planned programme. 63 places across the Shetland Islands fall within our area, including Sandness.
Commercial sites across ZE2 are covered. Sites close to Sandness are covered too, including Melby (1 mile north-west), Walls (6 miles south-east), Aith (10 miles east), Easter Skeld (11 miles south-east) and Brae (12 miles north-east). For island and remote sites, we plan travel and materials carefully, so the full address helps from the start.
Landmarks near Sandness
Green spaces nearby include Loch of Norby.
Different surfaces, different methods
Cladding panel joints
We confirm what access is in place before pricing. Close-up photographs help us judge the joints.
Joints between different materials
Junctions between brick and render, or concrete and cladding, move independently. The product must bond to both substrates and cope with the movement, with primer where specified.
When to call us in Sandness
Some joints were never sealed with the right product. Products not classed for the movement fail early. BS EN ISO 11600 classifies building sealants by movement capability.
It’s worth sending us details if you spot any of the following:
- Torn sealant in brick or block movement joints
- Joints packed with grit and debris
- Car park joints leaking onto vehicles below
- Sealant pulling off the joint face
Around Sandness, each joint gets a filler or sealant matched to what crosses it and how much it moves.
Questions to ask before you book
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- Can the work be phased to keep areas open?
- What the guarantee covers, and for how long
- Which product they’ll use, and why it suits the joint
Also in Sandness
Commercial clients in Sandness
Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Sites in Sandness can sit alongside others in a wider programme across the Shetland Islands.
On site: what to expect
In a busy building, the work is phased so only one area is out of use at a time. Each area is protected, prepared and sealed before the next one starts. For work around Sandness, we aim for one trip, so photographs, sizes and a full list matter. Outside work also needs a suitable weather window.
- We look at the joints, their width and how they’ve failed.
- You get a fixed quote with the product and its movement capability stated.
- Old sealant and filler are cut out and the joint faces cleaned back to sound material.
- Backing rod goes in at the right depth, or bond-breaker tape where the joint is shallow.
- Primer goes on where the manufacturer specifies it, followed by the sealant, which is then tooled off.
- Finished joints are checked and backed by our 12-month guarantee.
Before we start on site
- Send any specification or drawings in advance
- Tell us which areas need to stay in use
- Warn occupants and staff about the work
Request a quote
Send us photographs, drawings or a joint schedule are often enough for a fixed quote. If the job needs a look first, we’ll arrange a site visit.
Read more
How the quote is worked out
Each job is priced on its own details. The main factors are:
- The product specified
- Quantities, in metres or numbers
- Access and working height
- Backing rod, priming and other preparation
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Mention the access as part of your enquiry.
What to include in your enquiry
Whether it’s one area or a whole building, the same details help:
- The type of building and who uses it
- Clear photographs of the problem areas
- Asbestos survey details if the building is older
- The product your specification calls for
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To ask for one, phone 01277 525 020 or email a schedule or drawings.