The Mastic Doctor team standing beside their branded vans outside an office building
Shetland Islands · Scotland

Expansion Joint Sealing in Hogaland

Commercial sealant work in Hogaland for contractors, FMs and building owners: expansion and movement joint sealing in walls, decks and floors, with a fixed quote first.

  • Rain penetration at brick or block movement joints
  • Brittle, chalky sealant on external joints
  • Car park joints leaking onto vehicles below
1
Send details
Drawings, photos, a joint schedule or a site visit.
2
Get a quote
Scope agreed and priced before anything starts.
3
We seal
The right sealant, to the right depth, neatly finished.
4
Guaranteed
Signed off, with 12 months’ guarantee.
London, the South East & Scotland
CHAS & Constructionline
£5m PL insurance

Expansion joint sealing for Hogaland sites

Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.

Expansion joint sealing in Hogaland, done properly

Our movement joint work takes in walls, panels, decks and floors: vertical joints in brick and block facades, joints between precast or cladding panels, concrete slab and deck joints, ramps, podiums and internal floors. The product depends on the movement, the weather and anything that runs over it. We work on brickwork movement joints, precast concrete panel joints and podiums and floor movement joints, and what we are called in for most is joints packed with grit and debris and arrises breaking up along floor joints. Looking for mastic applicators who cover Hogaland? Mastic Doctor has worked for contractors, FMs and building owners since 2005, with CSCS-carded applicators.

For outside joints near Hogaland, the Scottish weather sets the timetable: sealant needs a dry joint and a temperature within its range. Internal floors can be done whenever suits the site.

Every job we finish is backed by a 12-month workmanship guarantee. If our installation lets you down in that time, we return and fix it.

The Mastic Doctor team beside their liveried vans in front of an office building
Location
Hogaland (ZE2)
Wider area
Shetland Islands
Cover
12 months on our workmanship
Price
Fixed quote, scope in writing
Call
01277 525 020
Page updated
3 November 2026

Hogaland: questions and answers

Our building in Hogaland is near the coast: does that change the sealant?

It can. Wind-driven rain and, closer to the shore, salt air are harder on external joints. We check the specified product suits the exposure and pay close attention to preparation.

Do we have to stop operations in Hogaland while the joints are sealed?

Rarely. Work is phased around your operations. We agree the sequence and timings with you before we start.

How do you choose the sealant?

If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.

How much does the work cost?

Each job is quoted on its own details. To get one, speak to us on 01277 525 020 or email a schedule or drawings.

How do I request a quote?

The quote form is the simplest route, though you can also phone 01277 525 020 or use the quote form. Photos, drawings or a joint schedule help us quote quickly.

What guarantee do you give on joint sealing?

Each job is backed by a 12-month guarantee on the workmanship. Damage from later works or traffic loads outside the joint’s design isn’t a workmanship fault.

Which product is best for expansion joints?

The specification comes first, then the joint’s movement and exposure. We name the proposed product in the quote.

Signs you need expansion joint sealing in Hogaland

Repeated failure often traces back to the wrong product. A stiff or general-purpose sealant across a joint with large movement won’t cope. Movement capability is set out in BS EN ISO 11600, and specifications often refer to it.

What tends to prompt an enquiry:

  • Previous reseals laid over old sealant
  • Chipped joint edges on forklift routes
  • Expansion joints filled with dirt and stones
  • Movement joints with split or torn sealant

Around Hogaland, each joint gets a filler or sealant matched to what crosses it and how much it moves.

Comparing quotes

  • What site paperwork they can supply
  • Which product they’ll use, and why it suits the joint
  • Are they CHAS accredited or on Constructionline?
  • What level of public liability insurance do they hold?

Our contractor checklist

Keeping the joints sound

To get the most from the new sealant:

  • Keep stones and debris out of open joint lines
  • Keep product details with the building records for the next reseal
  • Look over external and deck joints after a hard winter
  • Include every elevation and deck joint in periodic inspections

On car parks, winter clearance can damage deck joint sealant. Lifting the blade at each joint avoids tearing the bead.

An open joint fills with grit, and a joint full of grit can’t close. The edges then take the pressure and start to spall and the reseal becomes an edge repair as well. A sound seal keeps the joint working.

Honest limits

Some faults sit outside our scope, and we point that out rather than sealing over them:

  • Waterproofing layers buried beneath the sealant
  • Changing the joint layout or spacing of a structure
  • Proprietary pre-formed expansion joint systems

If in doubt, give us a call on 01277 525 020 or send photos by email and we’ll say what we think.

Surfaces we seal

  • Blockwork control joints
  • Podiums and floor movement joints
  • Cladding panel joints
  • Car park decks and ramps
  • Brickwork movement joints
  • Precast concrete panel joints

Surface by surface

Internal floor movement joints

Warehouse and retail floors have saw-cut induced joints and construction joints. A semi-rigid filler is common in trafficked industrial floors, with a flexible sealant where movement is larger.

Joints between different materials

Hybrid or MS polymer sealants bond to many substrates. The choice depends on the substrates and how much the joint moves, and confirm it in the quote.

Floors, slabs and movement joints in Hogaland

With the shore within about 1 mile, Hogaland counts as a coastal location. Open joints in coastal car parks and yards let in salt-laden water as well as grit, and edges left open tend to break up faster. Being on an island, Hogaland means planning around ferry times as well as the weather. Joint widths, lengths and the traffic over them help us bring the right fillers and sealants.

Once a joint near Hogaland opens up, grit and water get in and the edges start to break; we’ll tell you if the edges need repairing first.

Hogaland is in the Shetland Islands. Hogaland sits inside our coverage and the rest of the Shetland Islands, with the same fixed quotes and 12-month guarantee as everywhere else. Hogaland is one of 63 places in the Shetland Islands on our list.

Work on movement joints is covered throughout ZE2, for business premises of every kind. Hogaland sits on or close to the B9079. Close to Hogaland, our area also takes in Ollaberry (1 mile north-east), Urafirth (3 miles west), Sullom (4 miles south), Hillswick (4 miles west) and Scatsta (5 miles south-east). Where a site is remote or on an island, we plan travel and materials carefully, so the full address helps from the start.

Landmarks near Hogaland

Green spaces nearby include Hill of Skea and Burgan Loch.

Map of Hogaland © OpenStreetMap contributors

Building owners, agents and FMs in Hogaland

Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, and each stage is agreed with your contact.

Hotels, schools, healthcare sites, offices and retail units come to us directly as well. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.

How a job runs

Before we leave any area, we remove the tape, clean down and inspect every joint. Where the sealant needs time to cure before use, we tell you and sign the area. Jobs near Hogaland are often grouped with others in the same area. Let us know if your dates have any give.

  1. Photos, joint lengths and drawings come to us, or we visit.
  2. We compare each joint’s width with the movement and the sealant’s capability and tell you if the design looks wrong for the movement.
  3. Old sealant and debris are cut out of every joint.
  4. Edges are checked, and we tell you if any need repairing before sealing.
  5. The right sealant goes in at the right depth, bonded to the two sides only.
  6. Areas reopen once cured, and the work carries our 12-month guarantee.

Getting the site ready

  • Explain the parking and delivery arrangements
  • Point out any areas we must not close
  • Tell us your opening times and when work is allowed

Get a fixed quote

If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photos and a few notes.

Get a quick quote

Advice

Accreditations

Trusted. Accredited. Insured.