Expansion and movement joint sealing in Hillswick, Shetland Islands
Commercial sealant work in Hillswick for contractors, FMs and building owners: expansion and movement joint sealing in walls, decks and floors, with a fixed quote first.
- Water getting into the wall through a failed joint
- Weathered movement joint sealant that no longer flexes
- Movement joints with split or torn sealant
Expansion joint sealing near Hillswick
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Cost factors for movement joints
Each job is priced on its own details. The main factors are:
- The site’s rules and procedures
- Location, for remote and island sites
- The total length or number of joints
- Access and working height
The price depends on the quantity of joints, what has to come out first and how the joints are reached. Call for a fixed quote when you’re ready.
What we need to price the job
Good information means a firmer quote. When you get in touch, include:
- A wide shot and a close-up of the area
- Your programme or deadline
- Any specification or named product
- Where the site is, with the postcode
Pricing a project or setting a maintenance budget? We’ll quote against your scope and drawings that you can work with. If you have questions first, call 01277 525 020 or email us.
Expansion joint sealing in Hillswick
The seal is what lets a movement joint do its job. Once it fails, water, grit and debris get in, the joint can’t close properly and its edges begin to crumble. Resealing at the first signs of failure is far cheaper than repairing the material either side. If you have weathered movement joint sealant that no longer flexes and water getting into the wall through a failed joint, we can put it right, on podiums and floor movement joints, cladding panel joints and blockwork control joints alike. Searching for sealant specialists in Hillswick? Mastic Doctor has worked for contractors, FMs and building owners since 2005, CHAS accredited and a Constructionline member.
For floor or movement joints around smaller places like Hillswick, we plan to finish in one visit where we can. Photos, approximate widths and what uses the floor help us bring the right materials.
Every job we finish is backed by a 12-month workmanship guarantee. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Location
- Hillswick (ZE2)
- Wider area
- Shetland Islands
- Cover
- A 12-month guarantee
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Where floor joints take the most wear near Hillswick
Hillswick sits close to the coast, within about 1 mile. Open joints in coastal car parks and yards let in salt-laden water as well as grit, and edges left open tend to break up faster. The east of Scotland, where Hillswick is, gets less rain than the west. Cold winters and gritting are hard on any yard or deck joint left open. Autumn is a sensible time to seal them.
In and around Hillswick, the right filler or sealant for each joint depends on the traffic and the movement it takes. Around Hillswick, open joints collect water and debris, and the arrises are the next to go; we will tell you if the edges need repairing first.
Hillswick is in the Shetland Islands. Businesses, contractors and managing agents in Hillswick use us for work on movement joints. Hillswick is one of 63 places we cover in the Shetland Islands.
Business premises anywhere in ZE2 are within our area for movement joints. Sites close to Hillswick are covered too, including Urafirth (1 mile north-east), Braehoulland (3 miles north-west), Hogaland (4 miles east), Sullom (5 miles south-east) and Ollaberry (5 miles east). Where a site is remote or on an island, we plan travel and materials carefully, so the full address helps from the start.
Around Hillswick
Recent enquiries here include premises near The Booth pub and the streets around them. Well-known places in the area include Tangwick Haa Museum (3.4 miles west). Not far away are Ness-houlls Water.
Questions about Hillswick
Must our site in Hillswick stop work while the joints are done?
In most cases the site keeps working. Joints are done in phases, a bay, aisle or deck at a time. Tell us which hours and entrances we can use and we will plan from there.
Our building in Hillswick is near the coast: does that change the sealant?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. Product choice and preparation matter more, and sea-facing elevations are worth inspecting more often.
Which sealant will you use?
If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
What if the joint edges are damaged?
Sealant needs sound faces to bond to, so we will tell you if the edges need repairing before sealing. We flag it at the quote stage where we can see it.
Can you work on car park ramps and decks?
Yes, we do. Tyre loads, grit and de-icing salts make these some of the hardest joints to keep sealed, and we will tell you if any edges need repairing first.
Does the weather affect joint sealing?
The joint has to be dry, and the air and surface temperature inside the product’s limits. Cold, damp or frosty mornings can stop work outside, so we plan with the forecast in mind.
Do you offer coloured sealant?
That depends on the product specified. Some ranges are wide, others limited, so we’ll confirm the colours available for the specified product with the quote.
Work for main contractors and building owners
If you look after buildings for someone else, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
CHAS accredited and a Constructionline member, we are straightforward to vet for your supplier list. We are fully insured, and our insurance certificate can go with the quote.
Also in Hillswick
What sealant work can’t fix
Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. These need a different solution:
- Proprietary pre-formed expansion joint systems
- Leaks coming from the membrane rather than the joint seal
- Concrete or masonry repairs along the arrises
Not sure which it is? You can call the office on 01277 525 020 or email drawings and photos and we will tell you honestly before you book.
Joints and surfaces we work on
- Brickwork movement joints
- Podiums and floor movement joints
- Car park decks and ramps
- Cladding panel joints
- Precast concrete panel joints
- Blockwork control joints
Aftercare for building managers
To get the most from the new sealant:
- Keep stones and debris out of open joint lines
- Keep traffic off new joints until the cure time is up
- Brief car park operatives to protect joint lines during winter clearance
- Keep racking legs and heavy point loads off floor joints
Movement joints belong on the planned maintenance inspection list. Early splits and edges starting to lift show up on a routine check and long before edges start to break. Should you spot a problem, you can ring 01277 525 020 or use the quote form and send a picture.
Floor joints with failed fillers break up quickly under wheels. Broken arrises jolt trucks, loads and drivers. Sealing early protects the edges.
Why deal with it now?
A torn seal left alone usually gets worse. Grit and water fill the gap and the material either side breaks up, so a reseal turns into an edge repair as well. Acting at the first split keeps the cost down. For buildings near Hillswick, dealing with all the failing joints at once saves return trips. Photos of each area help us quote the whole job.
Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
Why choose Mastic Doctor in Hillswick
- Colours chosen to suit frames, cladding or finishes where possible
- One contact handling all your sites
- Fully insured, including public liability cover
- Colour options checked against the specified product
Read our cost guide or how we’re accredited.
Diagnose, treat, sign off
On arrival, we sign in, go through any site induction and check how permits are handled. Everything around the joints gets protected before anything is cut or cleaned, and the work typically takes a few hours to several weeks, depending on how many metres of joint there are and how much old sealant or filler needs removing. Tell us who will meet us and how to get in at your building near Hillswick. We’ll confirm the plan with the fixed quote.
- First the joints are inspected, widths measured and the type of failure noted.
- A fixed quote names the sealant we propose and its movement class.
- Phasing is agreed so decks, floors or entrances can stay in use where needed.
- We strip the old sealant or filler and prepare each face until it’s sound and dry.
- Depth is controlled with backing, the faces are primed where the maker calls for it, then the bead is laid and tooled.
- Finished joints are inspected, the cure time confirmed and the 12-month guarantee applies.
What we need from you
- For older buildings, check the asbestos register before work
- Tell staff and tenants when we’ll be in
- Point out any areas we must not close
Request a quote
Let us know the site, the scope and your timescale, and we will put a fixed quote together. The easiest way is to call the office on 01277 525 020 or email drawings and photos.