Hillswick coloured sealant
Coloured sealant for Hillswick, from a contractor working since 2005. Fully insured and CHAS accredited.
- Poorly tooled joints on visible finishes
- Shop fits that need consistent sealant colours across sites
- A run of joints in mismatched shades
Coloured sealant across Hillswick
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Hillswick: questions and answers
Will you travel to Hillswick on the island?
Yes. Islands are part of our area, Hillswick included. We plan island jobs around the ferry and the forecast, and bring everything the job needs on the first crossing.
Can being near the sea in Hillswick affect the sealant we need?
It can. Wind-driven rain and, closer to the shore, salt air are harder on external joints. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.
Can weather delay the job?
For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so frost, rain or cold mornings can delay outside work. Inside work is seldom held up.
Are your applicators CSCS-carded?
Yes. If you need card details for site access, tell us and we’ll confirm them with the quote.
Will the sealant be an exact match to our finish?
No. An exact bespoke match isn’t something we can promise. Sealants come in a wide range of standard colours, and we’ll confirm the colours available for the specified product for your approval.
Does the colour affect how the joint performs?
Colour is a choice within a product’s range, not a separate type of sealant. A properly prepared and tooled joint performs as the product intends, whatever the colour.
Do you work on hotel and retail fit-outs?
Yes. Shop fits, hotels and office fit-outs are a regular part of our work. Sites anywhere in our area, from London and the South East to Scotland, can be included, so a consistent colour can run across several sites.
How we handle coloured sealant in Hillswick
In retail, hospitality and office fit-outs, joints are seen close up every day. A mismatched bead can make good joinery look unfinished. We pick a colour from the product’s range that sits with the finish. We work on powder-coated and anodised frames, hotel bathrooms and public areas and shop-fit joinery and counters, and the failures we’re asked to look at most are fit-outs with a sealant colour in the specification and old sealant that has yellowed, darkened or faded. For commercial sealant work in Hillswick, you deal with one contact from quote to sign-off, whether it’s one building or several.
For a job around Hillswick, the Scottish weather is part of the planning: sealant needs a dry joint and the right temperature, so external work has a weather window built in. Indoor work isn’t held up by rain.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Place
- Hillswick (ZE2)
- Region
- Shetland Islands
- Guarantee
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
What else we do in Hillswick
Aftercare for building managers
Once the work is signed off, these steps help:
- Approve a sample bead on high-profile areas
- Note which sealant colour was used where
- Keep harsh solvents away from visible joints
- Plan full-run reseals on visible elevations
Clean coloured joints with mild, non-abrasive products. Strong solvents and abrasive pads can dull or mark the surface.
Settle the colour early in the project. Late decisions lead to substitutes and mismatches, so agree it with the designer at the start.
What affects the price in Hillswick
The price varies from site to site. It mainly depends on:
- Induction, permit and paperwork requirements
- Removal of failed or old sealant
- Location, for remote and island sites
- Working within restricted access windows
Every site prices differently: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
What we need to price the job
It doesn’t need to be a full survey. A few details are enough to get going:
- Any specification or named product
- Drawings or a marked-up plan, if available
- The site address and postcode
- How the joints are reached, and at what height
Send us photos, drawings or a joint schedule and a fixed quote comes back to you. If the job needs a look first, we’ll arrange a site visit.
Signs you need coloured sealant in Hillswick
Sometimes the wrong colour went in at the start. The joint may work perfectly but look out of place, so someone asks for it to be changed.
Clients typically get in touch after noticing one or more of the following:
- Old sealant that has yellowed, darkened or faded
- Colour changes after a rebrand or refit
- Stained or mouldy coloured joints in washrooms
- Previous reseals that don’t match the original
In hotels such as St Magnus Bay Hotel, which lies west of Hillswick, refurbishments usually mean bathroom, bar and reception joints where a matched sealant colour has to sit with the finishes.
Questions to ask before you book
- Proof of insurance
- Do they follow the manufacturer’s priming guidance?
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- How the existing material will be dealt with
When it isn’t the sealant
A few problems need another trade or a different fix, and we point that out rather than sealing over them:
- Paintable products in joints they aren’t suited to
- A guaranteed perfect match to every finish
- Preventing all fading from sunlight and weathering
Not sure which it is? You can give us a call on 01277 525 020 or email the details over and we’ll tell you honestly.
Where we work in Hillswick
- Shop-fit joinery and counters
- Powder-coated and anodised frames
- Natural stone and brick
- Hotel bathrooms and public areas
- Cladding panels
- Office fit-out finishes
What happens if it’s left?
A brand roll-out or multi-site fit-out benefits from a consistent sealant colour. Fixing the colour reference at the start keeps every site the same from one fit-out to the next. Renewing every failing joint on one visit is the sensible approach for a place like Hillswick. Photos of each area help us quote the whole job.
A quote for colour-matched joints depends on quantities, condition and access, plus any specification you’re working to. Ask us for a fixed quote.
What you get with us
- A range of standard colours, depending on the product
- Work carried out by CSCS-carded applicators
- Colours chosen to suit frames, cladding or finishes where possible
- A Constructionline member, so easy to vet
Shops, offices and hotels in and around Hillswick
With the shore within about 1 mile, Hillswick counts as a coastal location. Buildings near the sea put their external joints through more driven rain, with salt air nearer the beach. We choose a product rated for the exposure, then confirm the colours available for it. Being in the east of Scotland, Hillswick gets less rain than the west coast. Frost and condensation on winter mornings can still hold up external sealing.
For any commercial premises in Hillswick, a lasting joint depends on full removal of the old sealant and clean, dry faces.
Hillswick is in the Shetland Islands. Anywhere in ZE2, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. Hillswick is one of 63 places we cover in the Shetland Islands for colour-matched joints.
Business premises anywhere in ZE2 are within our area for colour-matched joints. Sites close to Hillswick are covered too, including Urafirth (1 mile north-east), Braehoulland (3 miles north-west), Hogaland (4 miles east), Sullom (5 miles south-east) and Ollaberry (5 miles east). For island and remote sites, travel and materials need planning ahead, so the full address helps from the start.
Landmarks near Hillswick
Recent enquiries here include premises near The Booth pub. Nearby you’ll also find Tangwick Haa Museum (3.4 miles west). Green spaces nearby include Ness-houlls Water.
How a job runs
Occupied buildings need a little choreography. We sign and contain the area we are in, keep walkways clear and move on in phases so staff and visitors can carry on around us. Tell us who will meet us and how to get in at your building near Hillswick. We’ll confirm the plan with the fixed quote.
- We confirm the product the joint needs before talking about colour.
- We compare your RAL reference or sample with the colours made for that sealant.
- A short trial length can be approved before the full run on visible work.
- We take out the existing bead, clean the joints and fit backing.
- The coloured sealant is applied and tooled with clean, masked edges.
Preparing the site
- Send asbestos survey details if the building is pre-2000
- Let us know about inductions and permits
- Arrange parking or a loading space
Get a fixed quote
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we will arrange a site visit if anything is unclear.