Felpham coloured sealant
Planning work on a colour-matched joint in Felpham? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Standard-colour sealant spoiling a high-end finish
- Colour changes after a rebrand or refit
- Shop fits that need consistent sealant colours across sites
Coloured sealant in Felpham
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Coloured sealant in Felpham, done properly
We take on colour-matched work across new fit-outs, refurbishments and resealing of existing joints on sites across West Sussex. When replacing old joints, the new colour typically has to match what’s already there, particularly where the building’s look matters. We work on shop-fit joinery and counters, hotel bathrooms and public areas and office fit-out finishes, and the failures we’re asked to look at most are joints that need to match a new RAL frame colour and white or grey sealant that clashes with the finish. Whoever orders the work in Felpham, the brief is normally the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Places like Felpham tend to have a handful of commercial buildings: a local shop, a pub or restaurant, a surgery, a school and the odd office or workshop. They’re not big jobs one by one, but their joints need the same preparation as anywhere.
We stand by our work with a 12-month guarantee. It covers how we prepared and applied the sealant, and we come back if anything isn’t right.
- Location
- Felpham (PO22, PO21)
- Region
- West Sussex
- Guarantee
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
On site: what to expect
At the end of each section, the masking comes off, the area is cleaned and every joint is checked with your site contact. Where the sealant needs time to cure before use, we tell you and sign the area. For a site in Felpham, we plan so the whole job is done in one go where possible. Photos with rough sizes let us arrive with everything needed.
- First we agree which sealant type the joint needs.
- We compare the target colour with the colours available.
- The nearest colour is agreed, with a sample bead where needed.
- The existing bead comes out, then faces are cleaned and backed.
- We mask, seal and tool to a clean line.
- Masking comes off and the work is checked with you.
Preparing the site
- Tell staff and tenants when we will be in
- Make sure the joints can be reached
- Send your site hours and access windows
Ask for a quote
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we will arrange a site visit if anything is unclear.
Advice
How the job changes by surface
Brick and masonry
Vertical movement joints run the full height of many brick walls. The right colour keeps them discreet without affecting the joint’s performance.
Office fit-outs
Office joinery and frames normally follow a colour scheme. We choose sealant colours to suit.
Do you need coloured sealant in Felpham?
A coloured joint can fail like any other: splits, adhesion loss and hardening all happen. The fix is a full cut-out and a new bead in the right colour.
Most enquiries start with one or more of the following:
- Dirty, discoloured joints in public areas
- Smeared sealant on stone or joinery
- Fit-outs with a sealant colour in the specification
- Old sealant that has yellowed, darkened or faded
Sites a few miles apart, such as Arun Retail Park and Southern Cross Trading Estate, can share one programme and one point of contact.
Comparing quotes
- Health and safety accreditation such as CHAS
- Will RAMS and insurance details be available?
- How they’ll work around occupants
- The terms of the workmanship guarantee
Coloured sealant in Felpham: the local picture
Felpham sits close to the coast, within about 1 mile. Buildings near the sea put their external joints through more driven rain, with salt air nearer the beach. A matched colour is only half the brief on an exposed frontage. Felpham has a good number of hotels close by, all within 2 miles. Refits in hotels bring joints at vanity tops, bar counters and reception desks where the colour has to suit the scheme.
Retail sites such as Arun Retail Park, 0.8 miles to the north-west of Felpham, are typical of where shop-fit joints, frontages and staff areas need neat, colour-matched sealant. Offices and shops close to stations such as Bognor Regis station, 1 mile west of Felpham, tend to be busy all day, so sealant work is planned around opening hours.
Felpham is about 1 mile east of Bognor Regis, in West Sussex. Felpham sits inside our coverage, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Felpham is one of 373 places in West Sussex on our list for colour-matched joints. Portsmouth is covered too, around 19 miles from Felpham.
We cover the PO22 and PO21 postcode districts for colour-matched joints. We cover commercial and managed buildings on Sea Road, Ley Road and Limmer Lane and the roads nearby. If your building is just outside Felpham, we cover South Bersted (1 mile west), Flansham (1 mile north-east), Bognor Regis (1 mile west), Middleton-on-Sea (2 miles east) and Shripney (2 miles north-west). Nearby towns on our patch include Worthing (11 miles east), Chichester (6 miles north-west), Selsey (7 miles south-west), Littlehampton (6 miles east), Lancing (15 miles east) and Rustington (7 miles east).
Landmarks near Felpham
Around Felpham, our work takes us to commercial buildings near The Brooks Local Nature Reserve, The Thatched House and Downview Primary School and the streets around them. For rail, the closest station is Bognor Regis station, about 1 mile west. A little further out are Bognor Regis Museum (1.2 miles south-west) and Bognor Regis War Memorial Hospital (1 mile west).
Questions we’re asked in Felpham
Does a coastal location like Felpham affect which sealant is used?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. That puts more weight on product choice, primers where the manufacturer specifies them, and correct joint sizing.
Do you cover business parks and estates near Felpham, such as Arun Retail Park?
Yes. Estates, retail parks and business parks around Felpham, Arun Retail Park among them, are all within reach. To start, just call 01277 525 020 or email the details over with the unit, the joints involved and your access times.
Do you need to see the site first?
Photos, drawings or a schedule are often enough to quote. Where they aren’t, we arrange a site visit before quoting.
Can you work to a RAL reference?
Yes. We compare the RAL reference with the colours made for the specified sealant. You will see the nearest options at quote stage.
Is it fine to apply new sealant on top of old?
No, never. Sealing over old material is one of the classic causes of early joint failure, so everything comes out first.
How do you deal with asbestos in old sealant?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and work stops until any suspect material has been tested. We don’t remove asbestos-containing materials.
When can you be on site?
Give us your site hours and any access windows in your enquiry, and we will plan around them. Our office runs Monday to Friday, 8am until 5pm.
What sets the cost
We price every job individually. The main factors are:
- The site’s rules and procedures
- Which sealant the job calls for
- The size and state of each joint
- Any access equipment needed
Pricing colour-matched joints depends on how many there are, their condition and the access, and any specification that applies. Call for a quote.
What to include in your enquiry
Good information means a firmer quote. Helpful details to send:
- Photos of the joints, close up and from further back
- What the building is and how it’s used
- The product your specification calls for
- Asbestos survey details if the building is older
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photos and a few notes.
Why act early in Felpham
A mismatched or discoloured bead is a small detail that buyers, guests and clients notice, particularly on high-end finishes. Resealing in a suitable colour is a modest cost against the finishes it sits beside, and the difference is obvious. A failed joint lets water into a building whatever its size. Early resealing avoids the damage that follows a leak.
We don’t publish prices, because the scope varies so much from one building to the next. Call for a quote and we’ll price your job on its own details.
Why us?
- Joints cleaned back to sound surfaces
- One number for every site we cover
- Colour options checked against the specified product
- Health and safety: CHAS accredited
Take a look at how commercial sealant jobs are priced or our accreditations and insurance.
Nearby places to Felpham
Also in Felpham
Building owners, agents and FMs in Felpham
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
We work for building owners and managing agents on everything from one building to a spread of sites. Several sites can go on one quote, which keeps the paperwork simple.