West Sussex · England
Commercial sealant contractors in PO21
We cover every part of the PO21 postcode district, including Bognor Regis, Nyetimber and Aldwick. Failed sealant is always cut out completely, with a 12-month guarantee.
Sealant contractors for PO21
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Places in PO21
What we do in PO21
- Industrial and floor joint sealing
- Mastic sealing for building owners and managing agents
- Commercial sealant contractors
- Facade and window perimeter sealing
- Construction and new-build mastic
- Commercial washroom and wet-area sealing
- Coloured and colour-matched sealant
- Fire-rated sealing and fire stopping
- Expansion and movement joint sealing
- Every service
Tell us what needs doing and your postcode and we’ll come back with a price: speak to us on 01277 525 020 or send details through our quote form.
Districts next door
More in West Sussex
Towns and villages in West Sussex
All areas
Commercial sealant contractors across PO21: what to expect
We’ve applied sealant on commercial sites for over 20 years: we are CHAS accredited and a Constructionline member, our applicators hold CSCS cards, and we carry five million pounds of public liability insurance. If your site needs RAMS, an insurance certificate or CSCS details, say so and we will confirm with the quote. We work on window and door perimeters, washrooms and tea points and external facade joints, and the usual reasons a site gets in touch are mouldy silicone around WCs, urinals and vanity tops and leaks that seem to come through a sealant line.
On arrival, we sign in, go through any site induction and check how permits are handled. Floors, finishes and fittings next to the joints are covered before anything is cut or cleaned, with the work itself usually taking as long as the agreed scope needs, from a single visit to a programme spread over several weeks.
- Send details through our quote form, or ask for a site visit.
- The cause is diagnosed and the scope priced as a fixed quote.
- Work is phased around your occupiers where areas need to stay in use.
- Old sealant is cut out completely, never sealed over.
- A suitable product for each joint goes in at the right depth and is tooled.
- A final walk-round, then the 12-month guarantee applies.
Pricing in PO21
We don’t publish prices, because the scope varies so much from one building to the next. Call for a quote.
What you get with us
- Workmanship guaranteed for 12 months
- Over 20 years of commercial sealing
- RAL and finish matching where the product range allows
- Colour options checked against the specified product
Getting a fixed quote
A handful of photos and a postcode is the fastest way to a quote. Send them through the quote form, or ring 01277 525 020 or email drawings and photos to discuss it first.
Landmarks near Bognor Regis
We work on buildings around The Regis School, West Park and Church of St Mary Magdalene and the streets around them. You will also find Norfolk Hotel (0.7 miles south-east), The Regis School (under half a mile north-west) and Southway Primary School (less than half a mile north-west). For rail, the closest station is Bognor Regis station, about 0.5 miles south-east. A little further out are Bognor Regis War Memorial Hospital (0.5 miles east) and Tote Copse Castle (3.1 miles north).
Commercial sealant contractors across PO21: the area picture
Across PO21, from Bognor Regis, Nyetimber and Aldwick to the smaller places between, commercial buildings run from high-street shops and offices to hotels, schools and business parks. Because we cover all of it, multi-site occupiers can bring every building under one quote, with colours matched site to site where the brand needs it.
The South East is one of the UK’s drier regions, but external sealing in PO21 still needs a dry joint and the right temperature, and damp or frosty mornings can hold it up. On the coastal side of PO21, sea-facing elevations typically show failed joints first.
Bognor Regis: Offices and shops close to stations such as Bognor Regis station, 0.5 miles south-east of Bognor Regis, tend to be busy all day, so sealant work is planned around opening hours. Sites a few miles apart, such as Durban Road Industrial Estate and Arun Retail Park, can share one programme and one point of contact.
Common problems we fix in PO21
In wet areas the enemy is typically mould rather than movement. Constant moisture, cleaning chemicals and weak extraction let mould grow into the sealant. The fix is a new bead of anti-mould sanitary silicone.
If one of these sounds familiar, it’s time for a closer look:
- Window and door perimeter joints that have cracked open
- A top-up bead over failed sealant, now lifting
- Hardened, chalky sealant on south-facing or exposed elevations
- Smeared sealant across finishes from a rushed job
Why deal with it now?
It can be tempting to hold sealant work back until the next refurbishment. For internal joints that are only cosmetic, that can make sense, but external and wet-area joints that already leak shouldn’t wait. We can seal the urgent joints now and leave the rest for the programme.
What your quote should include
- Their approach to joint depth and backing
- Will failed sealant be removed rather than covered?
- Their plan for phasing and protecting the area
- Who will actually carry out the work
Quoting for work in PO21
Before we quote, we look at:
- Working within restricted access windows
- The total length or number of joints
- Whether old sealant has to be cut out first
- Any access equipment needed
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a fixed quote.
Details that help us quote
A few photographs plus some basic facts will normally do. Please tell us:
- How the joints are reached, and at what height
- Clear photographs of the problem areas
- Drawings or a marked-up plan, if available
- Whether an asbestos survey exists
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we’ll fill any gaps with a visit.
Site staff or a sealant specialist?
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
What sealant work can’t fix
A few problems need another trade or a different fix, and we point that out rather than sealing over them:
- Broken glass or blown double-glazed units
- Roof leaks that only look like a joint problem
- Structural cracks or movement the joints weren’t designed for
Common questions from PO21 clients
What about asbestos in old mastic?
It’s possible in older buildings, especially those built before 2000. We ask to see the asbestos register or survey before disturbing old sealant, and anything suspect is left until it has been tested.
Will the building have to shut during the work?
It’s normal for us to work in occupied buildings. We agree the order of areas, protect what’s nearby and close off only the section we are sealing for as long as the cure needs.
When can the area be used after sealing?
The product and site conditions decide that. Some take light use quickly, others need longer to cure, and we confirm it before leaving site.
Will you just go over the old sealant?
No, never. Sealing over old material is one of the classic causes of early joint failure, so it all comes out first.
Do you hold CHAS accreditation?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
How long does a job like this take?
It depends on the scope, though a typical visit typically takes a few hours to several days on most single sites, depending on joint lengths and access. For bigger or phased jobs, we’ll set out a timescale with the quote.
Who decides which product is used?
A specification, where there is one, decides it. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.