Sealant applicators in Felpham
Looking for commercial sealant contractors in Felpham? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Movement joints packed with grit and debris
- Messy, uneven beads from earlier work that let the building down
- Water staining near frames, panels or ceilings
Commercial sealant contractors for Felpham sites
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Sealant specialists in Felpham
Some sealants used before 2000 can contain asbestos, so older stock needs a check first. We ask to see the asbestos register or survey before old sealant is disturbed, since managing asbestos is the dutyholder’s responsibility. If a material is suspected, work stops until it’s tested, and we don’t remove asbestos-containing materials ourselves. We work on washrooms and tea points, external facade joints and floor and threshold joints, and what we’re called in for most is hardened, chalky sealant on south-facing or exposed elevations and untidy joints in a reception, shop floor or lobby. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Felpham is the same: the right product in a properly prepared joint.
Quotes for commercial sealant in Felpham can come from photos and a joint schedule, or from a walk-round, with the scope listed so everyone knows what’s included.
In a smaller place such as Felpham, commercial buildings are typically a mix of shops, a pub or café, a school, a surgery and perhaps a few business units. Each job is modest, yet a joint in a small café needs the same cutting out, cleaning and sealing as one in a city office.
We stand behind the joints we seal with a 12-month guarantee. It covers how we prepared and applied the sealant, and if something we did falls short, we return to it.
- Location
- Felpham (PO22, PO21)
- Wider area
- West Sussex
- Cover
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
What Felpham’s businesses ask us to seal
The sea is no more than about 1 mile from Felpham. For shops, hotels and offices, that means frontage and frame joints that weather faster than they would inland. We choose a product rated for the exposure, then confirm the colours available for it. The South East is one of the drier parts of the UK. That helps, but frost and condensation on glass and coated frames still stop outside sealing on some winter mornings.
If you look after units at a retail site such as Arun Retail Park (0.8 miles north-west of Felpham), shopfront perimeters and shop-fit joints are where a matched colour shows. If you have premises on more than one site, say at Arun Retail Park and Southern Cross Trading Estate, one contractor and one quote can cover both. For premises near Bognor Regis station, 1 mile west of Felpham, footfall is part of the plan: work is phased so shops and offices keep trading.
Felpham is about 1 mile east of Bognor Regis, in West Sussex. Any commercial site in Felpham is covered, whether it’s a single job or part of a planned programme. Felpham is one of 373 places we cover in West Sussex. Portsmouth is covered too, some 19 miles away.
We cover the PO22 and PO21 postcode districts for sealant joints. If your site is on Sea Road, Ley Road and Limmer Lane or close by, we can quote for sealant joints. Just outside Felpham, we also work in South Bersted (1 mile west), Flansham (1 mile north-east), Bognor Regis (1 mile west), Middleton-on-Sea (2 miles east) and Shripney (2 miles north-west). Further afield, our area takes in Worthing (11 miles east), Chichester (6 miles north-west), Selsey (7 miles south-west), Littlehampton (6 miles east), Lancing (15 miles east) and Rustington (7 miles east).
Local landmarks in Felpham
Around Felpham, our work takes us to commercial buildings near The Brooks Local Nature Reserve, The Thatched House and Downview Primary School. The nearest railway station is Bognor Regis station, roughly 1 mile west of the centre. A little further out are Bognor Regis Museum (1.2 miles south-west) and Bognor Regis War Memorial Hospital (1 mile west).
Towns and villages near Felpham
Also in Felpham
Your questions answered
Our building in Felpham is near the coast: does that change the sealant?
It can, yes: buildings near the sea take more wind-driven rain, and salt in the air nearer the shore. We check the specified product suits the exposure and pay close attention to preparation.
Will our hotel in Felpham need to close for the work?
Rarely, if ever. We take a few rooms out at a time. We agree the order of rooms and the timings with you before we start.
What do you need from us to quote?
Photos, drawings or a schedule of the joints are normally enough to start. Where we need to see it, we will arrange a site visit, then send a fixed quote.
Do you work directly for building managers?
Yes. A large share of our work comes through facilities managers, managing agents and landlords. Tell us how you issue work and we will fit in.
Do you seal on top of existing sealant?
No, never. Sealing over old material is one of the classic causes of early joint failure, so everything comes out first.
Do you work in Felpham?
Yes. Felpham falls within our area, and the simplest way to start is to give us a call on 01277 525 020 or email a schedule or drawings.
What site paperwork can you provide?
Let us know your requirements when you ask for a price, and we’ll confirm the RAMS, insurance and CSCS details with the quote. For older buildings we will ask for the asbestos register, plus your site induction rules.
Why deal with it now?
Putting off a reseal typically moves the cost rather than avoiding it. Once water gets behind the seal, finishes and ceilings underneath are next. Resealing while only the sealant has failed keeps the job small. Small buildings around Felpham suffer from failed joints as much as large ones. Early resealing avoids the damage that follows a leak.
There’s no price list, because the scope varies so much from one building to the next. Call for a quote and we’ll price your job on its own details.
Why us?
- Products installed to the manufacturer’s instructions
- Fixed quotes based on photographs, drawings or a visit
- Colour options checked against the specified product
- One contact handling all your sites
See how commercial sealant jobs are priced and our accreditations and insurance.
Different surfaces, different methods
Shop fronts and retail fit-outs
Most shops can’t close for a reseal. Tell us your trading hours and access windows and we’ll plan around them, working in sections where that helps.
Window and door perimeters
The perimeter joint between a frame and the structure keeps rain out of the reveal. We remove the old seal, prepare the faces, fit backing where needed and seal again with a product chosen for both the frame and the wall.
What sets the cost
Your fixed quote is built from the real scope. It takes account of:
- Quantities, in metres or numbers
- Phasing around occupants
- Travel to remote or island sites
- Specialist products, such as fire-rated or hygienic sealants
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
What we need to price the job
Whether it’s one area or a whole building, these details speed things up:
- The type of building and who uses it
- Rough lengths or quantities, or drawings if you have them
- Any specification or named product
- Your programme or deadline
Photos, drawings or a schedule of the joints are often enough for a fixed quote. If the job needs a look first, we will arrange a site visit.
From enquiry to sign-off
Diagnose, treat, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and the job ends with a walk round and sign-off. For a site in Felpham, we plan so the whole job is done in one go where possible. Clear photos and measurements help us bring the right products.
- You send photos, drawings or a list of the joints and areas involved.
- The failure is diagnosed and a fixed quote issued for the work agreed.
- Site hours, access windows and the order of areas are agreed before we start.
- The failed bead is removed and the joint faces cleaned until they’re sound and dry.
- We fit backing to the right depth, prime where specified and lay the new bead.
- We walk the completed areas with you and sign them off under the 12-month guarantee.
What we need from you
- Flag any permit to work we will need
- Share the asbestos register for older buildings
- Tell us which areas need to stay in use
Get a fixed quote
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To ask for one, call the office on 01277 525 020 or use the quote form.
Related advice
Owners, agents and contractors
Main contractors use us as their sealant subcontractor. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.
Blocks and communal areas make up much of the work for housing associations and agents. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
When something else is needed
We check first that sealant really is the fix. It isn’t the answer for:
- Water from a services leak rather than a joint
- Suspect materials that need testing and specialist removal
- Broken glass or blown double-glazed units
If in doubt, phone 01277 525 020 or send photos by email and we’ll say what we think.
What we seal
- Floor and threshold joints
- Washrooms and tea points
- External facade joints
- Window and door perimeters
- Movement joints in walls and floors
- Kitchen worktops and splashbacks