Coloured and colour-matched sealant in Chichester, West Sussex
Coloured sealant in Chichester, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- White or grey sealant that clashes with the finish
- Smeared sealant on stone or joinery
- Old colour-matched joints lifting at the edges
Need coloured sealant in Chichester?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Coloured sealant in Chichester: the local picture
Chichester has three care or nursing homes no more than 2 miles away. Kitchens and communal rooms in care settings are cleaned constantly, so their joints need to be smooth and sound; colours can be chosen to suit the interior. Chichester lies roughly 54 miles out from central London. This part of the South East is dense with business parks and out-of-town offices. Occupiers with several premises in the region tend to prefer one contractor and one point of contact.
If you run an office at a site such as City Business Park, 0.6 miles to the south of Chichester, the sealant at reception desks, tea points and frames ages with each fit-out. A business with units at City Business Park and Terminus Industrial Estate needn’t use two contractors for its sealant.
Chichester is about 27 miles east of Southampton, in West Sussex. Looking for coloured sealant in Chichester? We can help, as we do across West Sussex. 373 places across West Sussex fall within our area, Chichester among them. For work in that direction, see our Portsmouth page (13 miles or so).
We take on colour-matched joints across the PO19, PO20, PO18 and PO10 postcode area, whatever the building. Among the streets we cover are St Martin's Square, Market Road and Old Market Avenue. Being close to the A27 and A259, Chichester is easy to get to with materials and equipment. Sites close to Chichester are covered too, including Portfield (1 mile east), Westhampnett (1 mile north-east), Shopwyke (2 miles east), Maudlin (2 miles north-east) and East Lavant (2 miles north). A short drive away, we cover Bognor Regis (5 miles south-east), Selsey (7 miles south), Littlehampton (11 miles east), Rustington (12 miles east), Storrington (15 miles east) and Angmering (13 miles east). Among the larger centres in West Sussex is Chichester, and its commercial and public buildings are all within our area.
Near you in Chichester
We work on buildings around Chichester High School For Girls, George and Dragon Inn and Central C of E Junior School and the streets around them. The closest station to Chichester is Chichester station, about 0.6 miles south of the centre. A little further out are Novium Museum (under half a mile south) and Chichester Castle (less than half a mile east). Open spaces near Chichester include Stoke Down and Kingley Vale National Nature Reserve.
Coloured sealant for commercial buildings in Chichester
Colour-matched joints are often among the last items before handover. Adjacent finishes are masked and protected while we work, and snag any marks before we leave. Our workmanship carries a 12-month guarantee. If you have coloured joints that have cracked with movement and colour changes after a rebrand or refit, we can help, whatever the surface. Whoever orders the work in Chichester, the brief is typically the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Smaller commercial landlords and businesses in a town like Chichester often have a handful of sealant jobs that can go on one visit: a frontage, a staff washroom, a kitchen and a few window perimeters, for example. A single fixed quote covers everything on the list.
We stand by our work with a 12-month guarantee. It covers how we prepared and applied the sealant.
- Where
- Chichester (PO19, PO20, PO18, PO10)
- Wider area
- West Sussex
- Guarantee
- 12 months on every job
- Quote
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Nearby places to Chichester
What else we do in Chichester
What sets the cost
A fixed quote reflects the actual work. It allows for:
- Joint width, depth and condition
- Specialist products, such as fire-rated or hygienic sealants
- Site requirements such as inductions and permits
- Any access equipment needed
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
What to include in your enquiry
The more we know, the firmer the quote. When you get in touch, include:
- Rough lengths or quantities, or drawings if you have them
- The product your specification calls for
- Whether the building will be occupied during the work
- How the joints are reached, and at what height
Pricing a project or setting a maintenance budget? We will quote against your scope and drawings you can plan around. For a chat about it beforehand, give us a call on 01277 525 020 or send details through our quote form.
Surface by surface
Paintable sealants
Paintable sealants suit internal, low-movement joints best. If the joint needs a product that can’t be painted, we say so.
Powder-coated and anodised frames
Metallic and anodised finishes are hard to match exactly with sealant. We will suggest the nearest standard colours.
On site: what to expect
Working in a building that stays open takes some planning. We sign and contain the area we’re in, keep walkways clear and work section by section so the rest of the building stays in use. Most work in Chichester is one building at a time: a school, a unit, an office or a block. We start with your photographs, drawings or a site visit, then send a fixed quote.
- We confirm the joint type and the product it needs.
- We compare the target colour with the colours available.
- You approve the colour, on site if it’s critical.
- The existing bead comes out, then faces are cleaned and backed.
- We mask, seal and tool to a clean line.
- Masking comes off and the work is checked with you.
Getting the site ready
- For older buildings, check the asbestos register before work
- Tell us your opening times and when work is allowed
- Make sure the joints can be reached
Ask for a quote
Tell us about the building, the joints and when you need the work done, and we will put a fixed quote together. The easiest way is to give us a call on 01277 525 020 or email a schedule or drawings.
Related advice
Keeping the joints sound
Keep the joints in good shape with a few simple steps:
- Clean coloured joints with mild products
- Keep the area clear while the sealant cures
- Agree the sealant colour early and write it into the specification
- Plan full-run reseals on visible elevations
Note the sealant type and colour on the building file. It makes matching later repairs much easier, avoiding a patchwork.
Approve a sample where colour really matters. A sample in real light shows how it will look.
When it isn’t the sealant
Honesty saves time and money. New sealant won’t cure:
- Preventing all fading from sunlight and weathering
- Finishes that change colour from one area to another
- A guaranteed perfect match to every finish
If in doubt, phone 01277 525 020 or email a schedule or drawings and we’ll say what we think before you book.
Joints and surfaces we work on
- Office fit-out finishes
- Cladding panels
- Shop-fit joinery and counters
- Natural stone and brick
- Powder-coated and anodised frames
- Hotel bathrooms and public areas
When to call us in Chichester
On some projects the colour was never agreed, or a different product was swapped in. The joint may work perfectly but look out of place, so someone asks for it to be changed.
These are often picked up first by site or facilities staff:
- Coloured joints that have cracked with movement
- A bead that fights the cladding or frame colour
- Discoloured joints on a visible elevation
- Patch repairs in several different colours
Units at places like Summersdale Retail Park (to the north of Chichester) are refitted as brands change, and the joints have to suit each new scheme.
Before you book anyone
- Whether their applicators hold CSCS cards
- What the guarantee covers, and for how long
- Whether primer will be used where the manufacturer specifies it
- Is the sealant right for the movement and the substrate?
Common questions from Chichester clients
Can the sealant on our Chichester premises match the finishes?
Yes, sealants come in a wide range of standard colours, and matching to RAL references, cladding, stone or frames is a common request. Send colour references or photographs and we’ll confirm what’s available for the product.
Does a hotel in Chichester need to shut while its sealant is renewed?
Rarely. Rooms or floors are done in turn, so the rest of the hotel keeps trading. The plan is built around your bookings.
When can you be on site?
Mention the site’s hours and access windows in your enquiry, and we will schedule the work to suit. You can reach the office between 8am and 5pm, Monday to Friday.
How long does a typical visit take?
That varies with the scale of the job, though a typical visit usually takes a few hours or a phased programme, depending on joint lengths and how many colours are involved. Larger or phased jobs take longer, and we will give you a timescale with the quote.
How do you choose the sealant?
A specification, where there is one, decides it. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Do your applicators hold CSCS cards?
Yes. Should the site need card details in advance, tell us and we will confirm them with the quote.
Can weather delay the job?
It can, for external work. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Internal work is far less affected.