Elmer coloured sealant
Commercial sealant work in Elmer for contractors, FMs and building owners: coloured and colour-matched sealant for visible joints, quoted at a fixed price.
- Old colour-matched joints lifting at the edges
- Stained or mouldy coloured joints in washrooms
- White or grey sealant that clashes with the finish
Coloured sealant across Elmer
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Coloured sealant for commercial buildings in Elmer
Colour-matched joints are often among the last items before handover. We work around other trades and protect adjacent finishes, and snag any marks before we leave. A 12-month guarantee covers our workmanship. Site teams most often ask us about standard-colour sealant spoiling a high-end finish and a run of joints in mismatched shades, on office fit-out finishes, hotel bathrooms and public areas and natural stone and brick. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Elmer is the same: the right product in a properly prepared joint.
Sealant jobs for businesses in a place the size of Elmer are often best grouped: shopfront, washroom, kitchen and any external joints done together. Fewer visits means less disruption to trading.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we’re clear about what is covered before work starts.
- Where
- Elmer (PO22)
- Wider area
- West Sussex
- Guarantee
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Shops, offices and hotels in and around Elmer
With the shore within about 1 mile, Elmer counts as a coastal location. Shopfronts, frames and external joints on commercial buildings there take wind-driven rain and, closer to the shore, salt in the air. Where a frontage needs a particular colour, the product still has to suit that exposure. A number of hotels sit less than 2 miles from Elmer. Hotel refurbishments are where a matched sealant colour earns its place: bathroom, bar and reception joints have to sit with the finishes.
For a hotel such as Ancton House Hotel, which lies north of Elmer, the colour of a joint at the bar or the bath matters to the look of the room. Shops and cafés around stations like Ford station (2.9 miles north-east of Elmer) trade from early, so work is timed around them. If you have premises on more than one site, say at Rudford Industrial Estate and Ford Airfield Industrial Estate, one contractor and one quote can cover both.
Elmer is about 3 miles east of Bognor Regis, in West Sussex. If you are looking for coloured sealant in Elmer, we can help, as we do across West Sussex. Elmer is one of 373 places in West Sussex on our list. For work in that direction, see our Portsmouth page, about 20 miles away.
We take on colour-matched joints across the PO22 postcode area. Streets here include Elmer Road, Ancton Lane and East Avenue, and sites on any of them can send details for a fixed quote. Just outside Elmer, we also work in Middleton-on-Sea (1 mile west), Bilsham (1 mile north), Atherington (1 mile north-east), Flansham (2 miles north-west) and Horsemere Green (2 miles north-east). Further afield, our area takes in Worthing (9 miles east), Bognor Regis (3 miles west), Chichester (8 miles north-west), Selsey (9 miles south-west), Littlehampton (4 miles east) and Shoreham-by-Sea (15 miles east).
Local landmarks in Elmer
In Elmer, that means premises near Felpham Community College, among other places. Elmer’s nearest station is Ford station, roughly 2.9 miles north-east. A little further out are Bognor Regis Museum (3.1 miles west) and Bognor Regis War Memorial Hospital (2.9 miles west).
Other services in Elmer
Doing it in-house
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
Our process
On arrival, we sign in, go through any site induction and check how permits are handled. Everything around the joints gets protected before anything is cut or cleaned, with the work itself usually taking a few hours or a phased programme, depending on joint lengths and how many colours are involved. For a job in Elmer, the main thing is a clear picture of the work, so send photos of each area. You will then get a fixed price for the work.
- We confirm the product the joint needs before talking about colour.
- We compare your RAL reference or sample with the colours made for that sealant.
- A short trial length can be approved before the full run on visible work.
- We take out the existing bead, clean the joints and fit backing.
- We apply the agreed colour and tool it neatly, with masking where the finish needs it.
Before we start on site
- Send any specification or drawings in advance
- Share your working hours and any access restrictions
- Point out parking and an unloading spot
Getting a fixed quote
Tell us about the building, the joints and when you need the work done, and we will put a fixed quote together. The easiest way is to phone 01277 525 020 or send details through our quote form.
Related advice
Aftercare for building managers
A few simple habits keep the new joints working:
- Settle the colour with the designer at the start
- Plan full-run reseals on visible elevations
- Don’t let trades patch coloured joints with a random sealant
- Standardise colours across a portfolio
Keep a record of the product and colour reference used. It makes matching later repairs much easier, with no guesswork.
Use one product and colour reference across a building or brand. Consistency makes future work simpler and easier to manage.
What the job involves on each surface
Powder-coated and anodised frames
Frames finished to a RAL reference are a frequent colour-matching job. We compare the reference with the specified product’s colour range, and you confirm the choice.
Shop-fit and joinery finishes
In shops, joints are at eye level and inspected by customers. Clean masking and neat tooling matter as much as colour.
Common questions from Elmer clients
Does a hotel in Elmer need to shut while its sealant is renewed?
Rarely. Rooms or floors are done in turn, so the rest of the hotel keeps trading. Tell us your quiet periods and access windows and we’ll plan around them.
Is Elmer too far out for you?
No. Small places get the same service as large ones. We cover Greater London and the counties of the South East. We plan jobs in smaller places so return trips are kept to a minimum.
Can you guarantee a perfect colour match?
No, not always. We match as closely as the product’s range allows and a sample can be approved before the full run.
Does the weather affect the work?
It can, when the joints are outside. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Indoors, the weather is rarely a problem.
Do you use coloured sanitary silicone?
Yes, where the product range allows. Hotel bathrooms, washrooms and kitchens often use coloured sanitary silicone to suit tiles or stone.
How much does the work cost?
We don’t publish prices, because every site is different. With photos or drawings, we can give you a fixed quote.
How long does a job like this take?
That varies with the scale of the job, but the work usually takes about the same time as any other sealant work, plus a little longer if a sample bead is agreed first. Larger or phased jobs take longer, and we will give you a timescale with the quote.
What happens if it’s left?
A failed joint lets in water and dirt, whatever colour it is. Behind the bead, moisture can damage substrates and finishes, so it’s worth fixing early. For buildings in places like Elmer, one well-planned visit beats several small ones, so we’d suggest renewing all the joints that are going, not just the worst.
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a quote and we’ll explain how it’s made up.
Why clients in Elmer choose us
- 12-month guarantee on workmanship
- Matching to RAL references, product permitting
- A Constructionline member, so easy to vet
- A range of standard colours, depending on the product
Read what affects the cost and our accreditations.
When it isn’t the sealant
We check first that sealant really is the fix. It isn’t the answer for:
- Repairing damaged frames or cladding
- Overpainting a joint that needs a non-paintable product
- Colour variation across natural stone or brick that no single shade can match
Not sure which it is? You can phone 01277 525 020 or email the details over and we’ll tell you honestly before you book.
Surfaces we seal
- Cladding panels
- Office fit-out finishes
- Powder-coated and anodised frames
- Hotel bathrooms and public areas
- Natural stone and brick
- Shop-fit joinery and counters