Aywick coloured sealant
Coloured and colour-matched sealant for visible joints in Aywick and across the Shetland Islands. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- A run of joints in mismatched shades
- Poorly tooled joints on visible finishes
- Fit-outs with a sealant colour in the specification
Coloured sealant across Aywick
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
When to call us in Aywick
A coloured joint can fail like any other: splits, adhesion loss and hardening all happen. We cut out and reseal in the agreed colour.
If one of these sounds familiar, it’s time for a closer look:
- Old sealant that has yellowed, darkened or faded
- Shop fits that need consistent sealant colours across sites
- Dirty, discoloured joints in public areas
- Poorly tooled joints on visible finishes
Colour matters on frontages and fit-outs, so the quote confirms which colours the chosen product comes in.
Comparing quotes
- What the guarantee covers, and for how long
- How the existing material will be dealt with
- What site paperwork they can supply
- How they’ll work around occupants
Coloured sealant for commercial buildings in Aywick
A colour-matched bead still has to work as a seal. Faces are prepared, depth is fixed with rod and the bead is tooled onto two sides only, with no shortcuts because it’s decorative. Clean masking and steady tooling give the sharp lines colour work needs. Most enquiries involve sealant that no longer suits recoated frames and standard-colour sealant spoiling a high-end finish, across powder-coated and anodised frames, natural stone and brick and hotel bathrooms and public areas. Most enquiries from Aywick start with one failed joint and grow into a wider look at the building: we look at the rest while we are there and tell you what we find.
Around smaller places such as Aywick, the commercial buildings tend to be hospitality, local shops, schools, health centres and converted rural buildings. Their kitchens, washrooms and window perimeters all need joints that keep water out.
Our 12-month guarantee is about workmanship, not wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we spell out the cover before we begin.
- Location
- Aywick (ZE2)
- Wider area
- Shetland Islands
- Guarantee
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
How the job changes by surface
Office fit-outs
Partition frames and joinery are often in a set colour. We choose sealant colours to suit.
Cladding panels
Where panels vary in colour, the joint colour is agreed for the whole elevation. Sometimes a mid-tone suits better than matching one panel and we can trial it first.
Commercial premises in Aywick
The sea is no more than about 1 mile from Aywick. Buildings near the sea put their external joints through more driven rain, with salt air nearer the beach. A matched colour is only half the brief on an exposed frontage. Island jobs, Aywick among them, are planned around the ferry and the forecast. Photos and a full list before we travel, with any colour references, mean everything comes on the first crossing.
Whatever the building in Aywick, commercial sealant work starts with cutting out the failed bead and cleaning the joint back to sound material.
Aywick is in the Shetland Islands. Commercial clients in Aywick can call on us for colour-matched joints, as part of our coverage of the Shetland Islands. Aywick is one of 63 places in the Shetland Islands on our list.
We take on colour-matched joints across the ZE2 postcode area, whatever the building. Close to Aywick, our area also takes in Mid Yell (3 miles north), Camb (4 miles north), Burravoe (4 miles south), Houbie (6 miles north-east) and Mossbank (9 miles south-west). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so mention the location when you call 01277 525 020 or email a schedule or drawings.
What’s near Aywick
For a walk, there’s Loch of Quheyin and White Hill of Vatsetter.
What else we do in Aywick
What sealant work can’t fix
We check first that sealant really is the fix. It won’t put right:
- Cleaning or repairing the surrounding finishes
- A guaranteed perfect match to every finish
- A colour that never alters with age
If you’re not sure, just call the office on 01277 525 020 or email us and we will give you a straight answer before you book.
Surfaces we seal
- Natural stone and brick
- Office fit-out finishes
- Cladding panels
- Powder-coated and anodised frames
- Shop-fit joinery and counters
- Hotel bathrooms and public areas
Looking after the joints
For the best life from the joints:
- Keep harsh solvents away from visible joints
- Approve a sample bead on high-profile areas
- Standardise colours across a portfolio
- Avoid piecemeal repairs on coloured joints
Use gentle cleaning methods on coloured sealant. Harsh chemicals and scouring can change how the colour looks over time.
Ask for a trial bead on high-profile areas. Seeing the cured colour in place avoids surprises.
From enquiry to sign-off
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Any old material is cut back to clean, sound faces, the manufacturer’s primer is applied where it’s called for, and each bead is tooled to a neat concave finish. Tell us who will meet us and how to get in at your building near Aywick. That goes into the plan alongside the quote.
- We confirm the product the joint needs before talking about colour.
- Colour references, samples or photographs of the finish are checked against the product’s range.
- A short trial length can be approved before the full run on visible work.
- We remove the existing bead, clean the faces and set the depth.
- We apply the agreed colour and tool it neatly, with masking where the finish needs it.
Before we start on site
- Have the specification and drawings to hand
- Tell us your opening times and when work is allowed
- Flag any permit to work we’ll need
Get a fixed quote
Send us photos, drawings or a joint schedule are often enough for a fixed quote. If the job needs a look first, we’ll arrange a site visit.
Read more
Work for main contractors and building owners
Main contractors use us as their sealant subcontractor. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Aywick can form part of a wider programme.
Questions about Aywick
Can being near the sea in Aywick affect the sealant we need?
It can. Wind-driven rain and, closer to the shore, salt air are harder on external joints. We check the specified product suits the exposure and pay close attention to preparation.
Do you work on the island where Aywick is?
Yes. We work across every Scottish council area, and that includes island locations such as Aywick. We group island work where we can and plan around the crossings.
What hours do you work?
Mention the site’s hours and access windows in your enquiry, and we’ll plan around them. You can reach the office between 8am and 5pm, Monday to Friday.
Do you match sealant to RAL colours?
Yes. We compare the RAL reference with the colours made for the specified sealant. You will see the nearest options before work starts.
Do you use coloured sanitary silicone?
Yes, where the product range allows. Hotel bathrooms, washrooms and kitchens often use coloured sanitary silicone to suit tiles or stone in commercial interiors.
How long does a typical visit take?
The duration is planned around your programme and the access we’re given. You’ll have an expected duration with the quote.
Do you work on hotel and retail fit-outs?
Yes. We work with shop fitters, hotel groups and office fit-out contractors. Our area takes in Greater London, the South East and Scotland, so a consistent colour can run across several sites.