Firth coloured sealant
Coloured sealant for Firth, from a contractor working since 2005. Fully insured and CHAS accredited.
- Shop fits that need consistent sealant colours across sites
- Poorly tooled joints on visible finishes
- Failed coloured sealant that has split or peeled
Coloured sealant for Firth sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Owners, agents and contractors
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Firth can form part of a wider programme across the Shetland Islands.
If you look after buildings for someone else, you need clear quotes and clear reporting. You get a fixed quote, an agreed scope and a walk round at the end, plus a 12-month guarantee.
Coloured sealant in Firth, done properly
Where colour is critical, a sample bead in a discreet spot settles the question. Sealant can look slightly different once it has cured, and again in different light. Let us know who signs off colour, and we’ll fit the sample into the programme. We work on cladding panels, office fit-out finishes and powder-coated and anodised frames, and the failures we’re asked to look at most are old sealant that has yellowed, darkened or faded and a run of joints in mismatched shades. Whoever orders the work in Firth, the brief is typically the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
For work in and around Firth, we’d rather do everything on one trip: send photos and a complete list so the right products and colours come on the day. Several jobs nearby can also be put together.
The 12-month guarantee covers our workmanship: preparation, application and finish. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Where
- Firth (ZE2)
- Wider area
- Shetland Islands
- Cover
- A 12-month guarantee
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
How the job changes by surface
Natural stone
Sandstone, limestone and granite each have distinct tones. Colour is agreed on site where possible before the full run.
Paintable sealants
Some joints are better sealed with a paintable product and decorated. That only works where the joint and specification allow it.
Questions we are asked in Firth
Can you take on a job in Firth, on the island?
Yes, Firth is within the area we cover. We cover the whole of Scotland. Ferry times and the weather set the plan, so we ask for photographs and a full list first.
Does the sea air around Firth change the choice of sealant?
It can, yes: buildings near the sea take more wind-driven rain, and salt in the air nearer the shore. We check the specified product suits the exposure and pay close attention to preparation.
Do your applicators hold CSCS cards?
Yes. We use CSCS-carded applicators.
Can you work to our specification?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it, flagging anything that needs clarifying.
Will the colour fade over time?
It can, to a degree. How much depends on the product, the colour and the exposure, and we can’t promise a colour that never alters.
Can you work while the building is occupied?
Yes, with some planning. We agree a sequence with your contact so just one area at a time is disrupted.
Do you take on small jobs?
Whatever the size, the process is the same: details, then a fixed price, then sealing, then a 12-month guarantee.
What sets the cost
These are the things that shape the price:
- The site’s rules and procedures
- The product specified
- Location, for remote and island sites
- Phasing around occupants
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote, and you’ll have a fixed figure to work with.
What to include in your enquiry
A good diagnosis starts with the right details. Tell us:
- Where the site is, with the postcode
- Approximate linear metres or a joint schedule
- The asbestos register, for older buildings
- The product your specification calls for
Specifications, drawings and tender packages are welcome with any enquiry, and we will price against exactly what is specified. Smaller jobs need nothing more than photos and a few notes.
Site staff or a sealant specialist?
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Commercial premises in Firth
With the shore within about 2 miles, Firth counts as a coastal location. Exposed frontages near the sea are hard on sealant, so the product has to suit the weather as well as the look. Where a frontage needs a particular colour, the product still has to suit that exposure. For an island location such as Firth, work is planned around ferry crossings and the weather. Send photos, a complete list and any colour references first, so nothing is left behind.
Where a joint is on show in Firth, we will check which shades the product offers before work starts. For any commercial premises in Firth, a lasting joint depends on full removal of the old sealant and clean, dry faces.
Firth is in the Shetland Islands. If you are looking for coloured sealant in Firth, we can help, as we do across the Shetland Islands. Firth is one of 63 places in the Shetland Islands on our list for colour-matched joints.
Business premises anywhere in ZE2 are within our area for colour-matched joints. For a building on Midlea, Leaside and Sandside or nearby, we can quote for colour-matched joints. Just outside Firth, we also work in Mossbank (1 mile north-east), Scatsta (4 miles west), Vidlin (6 miles south), Sullom (6 miles west) and Burravoe (6 miles north-east). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so give the site location in your enquiry.
Landmarks near Firth
Open spaces near Firth include Loch of Bordigarth.
Also in Firth
How a job runs
We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. Where we can, we combine work around Firth with other jobs nearby, to make the most of each trip. Let us know if your dates have any give.
- We confirm the product the joint needs before talking about colour.
- Colour references, samples or photos of the finish are checked against the product’s range.
- A short trial length can be approved before the full run on visible work.
- We remove the existing bead, clean the faces and set the depth.
- We apply the agreed colour and tool it neatly, with masking where the finish needs it.
What we need from you
- Let us know about inductions and permits
- Confirm the product named in the specification
- Share your working hours and any access restrictions
Quotes
Photos, drawings or a schedule of the joints are often enough for a fixed quote. If the job needs a look first, we will arrange a site visit.
Related advice
Honest limits
A proper diagnosis includes knowing what sealant can’t do. You’ll hear from us if the cause turns out to be any of the following:
- Paintable products in joints they aren’t suited to
- A colour that never alters with age
- Colour variation across natural stone or brick that no single shade can match
If in doubt, give us a call on 01277 525 020 or use the quote form and we’ll say what we think.
Surfaces we seal
- Powder-coated and anodised frames
- Hotel bathrooms and public areas
- Shop-fit joinery and counters
- Cladding panels
- Natural stone and brick
- Office fit-out finishes