The Mastic Doctor team standing beside their branded vans outside an office building
Edinburgh · Scotland

Washroom Sealing in Pilrig

We carry out sealing in commercial washrooms, showers, kitchens and wet areas in Pilrig. Send details for a fixed quote.

  • Stained sealant around pans and urinals
  • Washrooms that look worn because of the sealant
  • Failed sealant in a tea point or staff kitchen
1
Send details
Drawings, photos, a joint schedule or a site visit.
2
Get a quote
A fixed price, with what’s included set out clearly.
3
We seal
Prepared joints, the specified product, a tidy finish.
4
Guaranteed
Our workmanship is guaranteed for 12 months.
South East, London & Scotland
CHAS accredited
Fully insured: £5m PL

Need washroom sealing in Pilrig?

Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.

Washroom sealing in Pilrig

Black spotting along a sealant bead is not a cleaning problem. The growth is inside the sealant, which is why it comes back however often it is treated. Only replacement gets rid of it for good. If you’re dealing with urinal joints that look unhygienic and black mould inside silicone joints that cleaning can’t shift, we can help. One point of contact handles commercial sealant work in Pilrig from the first photographs to the final walk-round, for single jobs and planned programmes alike.

Scottish city buildings, from student residences to hospitals and offices, are full of washrooms and wet areas. Phased resealing, agreed with the estates or facilities team, keeps buildings working.

Guaranteed is the last step of every job. You get a 12-month guarantee on our workmanship, and the quote explains what it covers.

The Mastic Doctor team beside their liveried vans in front of an office building
Where
Pilrig (EH6, EH7, EH1)
Wider area
Edinburgh
Guarantee
12 months on every job
Quote
A fixed quote before we start
Phone
01277 525 020
Last updated
3 November 2026

Looking after the joints

Cleaning and maintenance staff play a part too. Pass these on to them:

  • Make sure washroom ventilation is running
  • Mention any site permits or estates rules at quote stage
  • Add sealant joints to planned maintenance checks
  • Act on the first split you see at a shower tray

Keep extract fans working and vents clear. A room that stays damp will grow mould on almost anything so report fans that aren’t working to your building services team.

Mould in a joint spreads along the bead and into nearby grout and users notice. Replacing it early keeps the job to a reseal.

What the job involves on each surface

Urinals and WC pans

Floor joints around WC pans are often forgotten. They are checked with everything else.

Changing rooms and gyms

We phase work so not every changing area is closed at once. Tell us your site hours and access windows and we will plan around them.

From enquiry to sign-off

On arrival, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before anything is cut or cleaned, with the work itself typically taking a few hours for one toilet block, with bigger buildings phased across a number of visits. In a Scottish city, kerbside space and loading need planning, especially near the centre. Tenement closes, shared stairs and factor approvals may also be involved.

  1. We survey each room, count the joints and note anything behind them that needs another trade.
  2. The phasing is agreed so there are always facilities open.
  3. We strip out the old bead and clean off the residue left behind.
  4. Each joint is degreased and left dry, because silicone won’t bond to damp or soapy surfaces.
  5. We lay a sanitary silicone bead and tool it smooth so it is easy to clean.
  6. You get a reopening time for every room, with signage left up until then.

Before we start on site

  • Let building users know which areas are affected
  • Agree which areas must stay open
  • Tell us your opening times and when work is allowed

Quotes

Let us know the site, the scope and your timescale, and a fixed quote will follow. To get it moving, give us a call on 01277 525 020 or use the quote form.

Get a quick quote

Advice

How the quote is worked out

Each job is priced on its own details. The main factors are:

  • The site’s rules and procedures
  • How accessible the joints are
  • Quantities, in metres or numbers
  • Distance, for remote addresses

Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits.

What to include in your enquiry

There’s no need for a formal survey. A few details are enough to get going:

  • How the joints are reached, and at what height
  • Whether an asbestos survey exists
  • Photos of the joints, close up and from further back
  • Where the site is, with the postcode

To get a fixed quote, phone 01277 525 020 or email us with the site address and an outline of the work. Our quote form is another easy route.

Washroom sealing around Pilrig: how the place shapes the job

The sea is no more than about 1 mile from Pilrig, and coastal hotels, guest houses and holiday sites tend to fill up in the busy months. Heavy seasonal use is hard on shower and basin sealant, and the quieter months are the natural time to reseal. There are a good number of hotels within about 2 miles of Pilrig. En suite bathrooms, staff changing rooms and kitchens all need their sanitary silicone renewed in time. The work can go floor by floor, agreed with housekeeping.

Units at estates like Jane Street Industrial Estate, less than half a mile north of Pilrig, have welfare blocks whose showers and toilets see shift after shift. Healthcare estates like Western General Hospital (Edinburgh), 2.1 miles west of Pilrig, expect contractors to follow their permits and cleaning rules in every washroom. At a college such as Royal College of General Practitioners Edinburgh, which lies south-west of Pilrig, washroom and kitchen sealant is best renewed in the holidays or in phases during term.

Pilrig is about 2 miles north-east of Edinburgh, in Edinburgh. We send applicators to Pilrig for washrooms and wet areas, handled exactly as we handle every other area. Across Edinburgh, 174 places are covered, Pilrig among them.

Postcode districts covered here: EH6, EH7 and EH1. For a building on Fyfe Lane, Haig Lane and Easter Road or nearby, send details and we’ll quote for washrooms and wet areas. Main routes into Pilrig include the A900, useful when we plan access and materials. We also cover Bonnington (1 mile north), Gayfield (1 mile south-west), Powderhall (1 mile west), Greenside (1 mile south) and Broughton (1 mile south-west) for washrooms and wet areas. Nearby towns on our patch include Queensferry (9 miles west), South Portobello (3 miles south-east), Southhouse (5 miles south), Gilmerton (5 miles south-east), Shandon (3 miles south-west) and Muirhouse (3 miles west).

What’s near Pilrig

Locally, jobs take us to sites close to 23 Elm Row and 2 Montgomery Street pub, McDonald Road Library and Taylor Gardens. Other local landmarks include London Street Primary School (0.5 miles south-west) and Drummond Community High School (0.5 miles south-west). For rail, the closest station is Edinburgh Waverley station, roughly 1 mile south-west of the centre. Nearby you will also find St. James Centre (0.8 miles south-west) and Leith Community Treatment Centre (0.5 miles north). Not far away are Dunsapie Loch and Salisbury Crags.

Map of Pilrig © OpenStreetMap contributors

Common questions from Pilrig clients

Do hotels near Pilrig have to close for sealant work?

Rarely. Rooms or floors are done in turn, so the rest of the hotel keeps trading. Tell us your quiet periods and access windows and we will plan around them.

Can you work in a care home near Pilrig with residents in?

Yes. Care settings are planned area by area, at times agreed with the home. We follow the home’s own procedures throughout.

Do you need to see the site first?

Many jobs can be quoted from photos, drawings or a joint schedule. If the job needs a look first, we will arrange a visit before quoting.

What site paperwork can you supply?

Requirements differ from site to site, so tell us what you need and we will confirm it when we quote.

How do we ask for a quote?

It works in four steps: send details, get a quote, we seal, guaranteed. Step one needs little more than photographs and a postcode.

Do you work to architects’ specifications?

Yes. We follow the specification, along with the manufacturer’s installation guidance.

How much does the work cost?

Every job gets its own fixed quote. To get one, speak to us on 01277 525 020 or send details through our quote form.

When it isn’t the sealant

We check first that sealant really is the fix. It isn’t the answer for:

  • A room that stays damp because ventilation isn’t working
  • A dripping waste or valve behind a panel
  • Leaks through tanking or membranes below the finishes

Not sure which it is? You can call 01277 525 020 or email us and we will tell you honestly before you book.

Surfaces we seal

  • Kitchens and tea points
  • Showers, trays and wet room floors
  • Urinals and WCs
  • Vanity units and basins
  • Accessible toilets and changing rooms
  • IPS panels and cubicles

Doing it in-house

General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.

Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.

Accreditations

Trusted. Accredited. Insured.