
Crieff floor joint sealing
Floor joint sealing in Crieff, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- A gap opening alongside old joint filler
- Sealant pulled out along a truck route
- Loading bay joints breaking down
Floor joint sealing across Crieff
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
What the job involves on each surface
Flexible floor sealants
Polyurethane floor sealants are available in a range of colours, and we’ll confirm what the specified product offers.
Retail and showroom floors
Polished and coated concrete floors in shops and showrooms show every joint. A flush, neat fill in a suitable colour keeps the floor looking right and confirm which colours the product comes in.
About our floor joint sealing in Crieff
For sites in Crieff and across Perth and Kinross, the process is short: you send details, we send a fixed quote, the joints are done and the 12-month guarantee follows. Approximate joint lengths, a few photographs and a floor plan are enough for a quick quote and a visit can be arranged where that is easier. We work on retail and showroom floors, construction joints and saw-cut induced joints, and what we’re called in for most is sealant pulled out along a truck route and loading bay joints breaking down. Facilities teams, main contractors and managing agents in Crieff tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
For outside joints near Crieff, the Scottish weather sets the timetable: sealant needs a dry joint and a temperature within its range, so dates have some give. Inside slabs aren’t affected and can be scheduled around the occupier.
The 12-month guarantee covers our workmanship: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Place
- Crieff (PH7)
- Wider area
- Perth and Kinross
- Cover
- 12 months on every job
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026

When to call us in Crieff
Small, hard wheels put a lot of load through a very small area. Crossing an open joint, the wheel drops and knocks the opposite arris, and repeated impacts break the concrete away.
Look out for the following:
- A rough ride across broken joints
- Broken arrises where pallet trucks cross
- Sealant pulled out along a truck route
- Old filler gone hard, cracked or loose
Sites like Crieff Community Hospital (less than half a mile south-west of Crieff) carry ambulances, deliveries and visitors’ cars over their road and deck joints.
What to look for in a quote
- Will failed sealant be removed rather than covered?
- Are they CHAS accredited or on Constructionline?
- Their public liability cover
- The terms of the workmanship guarantee
FAQs: Crieff
Can you work at a site such as Crioch Business Centre, by Crieff?
Yes, sites like Crioch Business Centre are within our area, along with the rest of Crieff. Send details of the unit and the work through our quote form for a quick quote.
Is Crieff off your patch?
No. Small places get the same service as large ones. Every Scottish council area is within our area. Good photos up front let us bring everything on the first visit.
What happens if the joint edges are damaged?
A filler needs sound edges to grip. We’ll tell you if the joint edges need repairing first and set out how that affects the job.
Will we need to close the floor?
In the majority of cases, just the area being treated is coned off. Each zone reopens when the product can take traffic and the next zone follows.
How long will the new sealant last?
It depends on movement, UV and weather, cleaning, traffic and the product. Treat them as maintenance items and inspect them regularly.
Can you work to our specification?
Yes. We follow the specification, along with the manufacturer’s installation guidance.
Is it fine to apply new sealant on top of old?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.
Joints that move: notes for Crieff
Crieff is on Scotland’s drier eastern side. Frost and winter road salt still work into open joints in car parks and yards. Sealing them in drier months limits winter damage.
For a school such as Morrison's Academy, playground and building joints can be done in the holidays. Business parks such as Crioch Business Centre, less than half a mile to the south-west of Crieff, have car parks, paved areas and long brick and panel elevations, all with movement joints.
Crieff is about 15 miles west of Perth, in Perth and Kinross. Any commercial site in Crieff is covered, for single jobs and planned programmes alike. Our Perth and Kinross coverage takes in 114 places, from busy centres to rural villages. For work in that direction, see our Dundee page, about 34 miles away.
Anyone looking for floor joint sealing in PH7 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. If your site is on High Street, West High Street and East High Street or close by, send details and we will quote for floor joints. Crieff sits on or close to the A85 and A822. If your building is just outside Crieff, we cover Gilmerton (2 miles north-east), Muthill (3 miles south), St David's (5 miles east), Madderty (5 miles east) and Comrie (6 miles west). Further afield, our area takes in Perth (15 miles east), Auchterarder (7 miles south-east), Letham (14 miles east), Tulloch (14 miles east), Oakbank (14 miles east) and Hillyland (14 miles east). As one of the bigger centres in Perth and Kinross, Crieff has a broad mix of commercial, public and industrial buildings.
Local landmarks in Crieff
Recent enquiries here include premises near The Pretoria Public House and the streets around them. Other landmarks nearby include Crieff Community Hospital (under half a mile south-west) and Crieff and Strathearn Museum (under half a mile west). Green spaces nearby include Loch Monzievaird.
Building owners, agents and FMs in Crieff
Main contractors use us as their sealant subcontractor on new-build and refurbishment projects. Programme, specification and site rules come first.
Housing associations and managing agents often need work done across blocks and communal areas. We phase the work so people keep access, and each stage is agreed with your contact.
Also near Crieff
Also in Crieff
On site: what to expect
In a busy building, we agree a sequence with your contact so the disruption stays in one area at once. Each section is protected, cleaned back and sealed, then handed back before the next one starts. Tell us who will meet us and how to get in at your building near Crieff. That goes into the plan alongside the quote.
- A floor survey records every joint, its edges and what crosses it.
- You receive a fixed quote showing products and phasing.
- Old fill and packed debris come out until both faces are sound.
- Dust is vacuumed out and primer applied where specified.
- Filler or sealant is placed to depth and finished flush.
- We hand each phase back when it can take traffic.
What we need from you
- Explain the parking and delivery arrangements
- Send your site hours and access windows
- Let us know about inductions and permits
Ask for a quote
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Send what you have, and we’ll arrange a site visit if anything is unclear.
Read more
Quoting for work in Crieff
The price varies from site to site. It mainly depends on:
- Working within restricted access windows
- Backing rod, priming and other preparation
- Quantities, in metres or numbers
- How much existing material needs removing
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well.
Details that help us quote
Good information means a firmer quote. Helpful details to send:
- Anything awkward about access or site hours
- A wide shot and a close-up of the area
- Your programme or deadline
- The postcode of the building
Let us know the site, the scope and your timescale, and we will put a fixed quote together. The easiest way is to call the office on 01277 525 020 or email a schedule or drawings.
After the work
Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. Our advice:
- Allow for topping up joints as a new slab settles
- Sweep debris out of open joints until they can be filled
- Let us know what the floor is cleaned with
- Treat loading bay joints first if they’re failing
Ask drivers not to drag forks or pallets along the floor. Even a well-filled joint can be damaged by steel scraping along it if it keeps happening.
Regular inspection catches failing fills before the edges go. A phased plan, worst routes first, spreads the work out and keeps on top of the rest.