Industrial and floor joint sealing in Thrumster, Highland
Our CSCS-carded applicators take on floor joint sealing and filling in warehouses, factories and industrial units in Thrumster and the surrounding area. Send details for a fixed quote.
- Filler that has parted from one face
- Joint edges breaking up under truck wheels
- Old filler gone hard, cracked or loose
Floor joint sealing near Thrumster
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
About our floor joint sealing in Thrumster
Forklifts and pallet trucks are hard on open joints. Each crossing knocks the unsupported edge, and over time a neat cut turns into a ragged channel. A properly filled joint carries the wheel over and protects both arrises. It also smooths the route for drivers and stock. The enquiries we see most involve loading bay joints breaking down and broken arrises where pallet trucks cross, on retail and showroom floors, joints along racking aisles and construction joints. Whether you call it commercial sealant work, mastic application or joint sealing, in Thrumster it comes down to the same thing: the right product in a properly prepared joint.
Weather windows decide external joint work around a place like Thrumster: sealant needs a dry joint and a temperature within its range. Inside slabs aren’t affected and can be scheduled around the occupier.
Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Location
- Thrumster (KW1)
- Region
- Highland
- Cover
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
When to call us in Thrumster
Pallet-truck and forklift wheels concentrate weight on a tiny contact patch. Where a joint is open, the wheel dips and strikes the far edge and those knocks chip the edge apart bit by bit.
Typical triggers for a call:
- Saw-cut joints left open and packed with grit
- Scruffy, dirty joint lines on a shop or showroom floor
- A rough ride across broken joints
- Dock area joints that have failed first
A healthcare site such as Wick Town and County Hospital, 3.2 miles north-east of Thrumster, depends on car parks, ramps and service yards whose joints take traffic all day.
What your quote should include
- Can the work be phased to keep areas open?
- Whether old or failed sealant will be cut out, not overlaid
- Their pre-qualification and accreditations
- Will RAMS and insurance details be available?
Warehouse floors and decks around Thrumster
With the shore within about 1 mile, Thrumster counts as a coastal location. Near the sea, external slabs, ramps and decks see salt air and driven rain as well as their usual loads, and edges left open tend to break up faster. Being in the east of Scotland, Thrumster gets less rain than the west coast. Freezing weather and salt still attack open external joints. Autumn is a sensible time to seal them.
For floors and slabs around Thrumster, the product is chosen for the traffic and the movement at each joint.
Thrumster is about 20 miles south-east of Thurso, in Highland. We cover commercial sites throughout Thrumster, whether it’s a single job or part of a planned programme. Our Highland coverage takes in 256 places, large and small.
Anyone looking for floor joint sealing in KW1 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. If your site is on Finlayson Place, Bella Mackay Place and Stewart Crescent or close by, we can quote for floor joints. Just outside Thrumster, we also work in Whiterow (3 miles north-east), Haster (4 miles north), Wick (4 miles north-east), Staxigoe (5 miles north-east) and Ackergillshore (6 miles north). Where a site is remote or on an island, travel and materials need planning ahead, so the full address helps from the start.
Near you in Thrumster
Thrumster’s nearest station is Wick station, roughly 3.8 miles north. Nearby you’ll also find Wick Heritage Museum (3.8 miles north-east) and Wick Town and County Hospital (3.2 miles north-east). Green spaces nearby include Loch Hempriggs.
From enquiry to sign-off
Diagnose, treat, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then the work is carried out to the specified product and detail, and the job ends with a walk round and sign-off. Tell us who will meet us and how to get in at your building near Thrumster. That goes into the plan alongside the quote.
- We look at joint widths, edge condition and the traffic on each route.
- The quote fixes the price, names the filler or sealant and shows how the floor will be zoned.
- We remove failed material and packed debris until sound concrete is exposed on both faces.
- Dust is sucked out of the joint and a primer used if the product data sheet asks for one.
- We fill each joint to depth and finish it flush so wheels roll straight across.
- Each phase reopens when the product is ready for wheels, then we start the next.
Preparing the site
- Tell us which areas need to stay in use
- Move anything stored against the joints
- Share your working hours and any access restrictions
Get a fixed quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, speak to us on 01277 525 020 or send photos by email.
Related advice
What happens if it’s left?
An open joint is a modest filling job while its edges are sound. Wait until the edges have spalled and the concrete needs repairing before the joint can be filled, with longer closures to match. Around smaller places like Thrumster, halls, stores and seasonal buildings may not be checked often, so a failed joint has time to cause damage. Early resealing prevents it.
A quote for floor joints depends on how many there are, their condition and the access, plus any specification you’re working to. Ask us for a fixed quote.
Why us?
- One contact handling all your sites
- Fully insured, including public liability cover
- 12-month guarantee on workmanship
- CSCS-carded applicators
Take a look at our cost guide or our accreditations and insurance.
Looking after the joints
Sealant joints are maintenance items, and their life depends on movement, exposure, cleaning and use. We suggest:
- Make joint checks part of your floor inspections
- Allow for topping up joints as a new slab settles
- Tell us about strong cleaning chemicals before we quote
- Start with the dock areas, where joints fail soonest
Once cured, the joints get cleaned along with the slab. If you use strong chemicals or hot-water washing, mention it when we quote so the product suits them.
Every day an open joint stays full of grit, the edges take more punishment. Filling it ends that cycle while it is still a straightforward job.
Surface by surface
Saw-cut induced joints
A sawn joint left open soon packs with debris and chips at the edges. Filled in good time, they stay narrow and neat.
Flexible floor sealants
Polyurethane sealants suit floor joints with larger movement. They give less edge support than semi-rigid fillers so they are used where movement matters more than wheel load.
More services for Thrumster
What sets the cost
Your fixed quote is built from the real scope. It takes account of:
- Site requirements such as inductions and permits
- Phasing around occupants
- The total length or number of joints
- Backing rod, priming and other preparation
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a quote and we’ll explain how it’s made up.
Details that help us quote
It doesn’t need to be a full survey. These details are enough to start:
- Approximate linear metres or a joint schedule
- Asbestos survey details if the building is older
- The type of building and who uses it
- How the joints are reached, and at what height
For a fixed quote, ring 01277 525 020 or send photos by email, telling us the site location and the nature of the job. Our quote form is another easy route.
Your questions answered
Do you take on work at healthcare sites like Wick Town and County Hospital?
Yes, healthcare and care buildings are part of our work. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Is Thrumster off your patch?
Not at all. Thrumster is within our area. Our area covers all of Scotland, cities, towns and islands alike. We plan jobs in smaller places so return trips are kept to a minimum.
What happens if old sealant might contain asbestos?
Managing asbestos is the dutyholder’s responsibility, so we will ask for the register before work on an older building. Work pauses if suspect material is found, until it has been tested.
Can you phase floor joint work around operations?
Normally only the zone we are working in has to close. Each zone reopens when the product can take traffic, then we move to the next.
Does the weather affect the work?
It can, for external work. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Indoors, the weather is rarely a problem.
How long do sealant joints last?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
How long does a typical visit take?
It depends on the scope, but the work typically takes a day for smaller units, with bigger warehouse floors programmed over several visits. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.