Expansion Joint Sealing in Thrumster
Work needed on a movement joint in Thrumster? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Movement joints with split or torn sealant
- Debris jammed in movement joints
- Water dripping through deck or ramp joints
Expansion joint sealing for Thrumster sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Expansion joint sealing in Thrumster, done properly
Our movement joint work takes in walls, panels, decks and floors: vertical joints in brick and block facades, joints between precast or cladding panels, concrete slab and deck joints, ramps, podiums and internal floors. Every one calls for a sealant picked for its movement, exposure and traffic. If you’re dealing with chipped joint edges on forklift routes and expansion joints filled with dirt and stones, we can help, on blockwork control joints, brickwork movement joints and cladding panel joints alike. Most enquiries from Thrumster start with one failed joint and grow into a wider look at the building: we look at the rest while we are there and tell you what we find.
Weather windows decide external joint work around a place like Thrumster: dry faces and the right temperature are essential. Inside slabs aren’t affected and can be scheduled around the occupier.
We stand by our work: 12 months, guaranteed. It covers how we prepared and applied the sealant, and if something we did falls short, we return to it.
- Where
- Thrumster (KW1)
- Wider area
- Highland
- Cover
- 12 months on our workmanship
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Our process
Site rules come first: sign-in, induction and whatever permit system the building uses. Once we are cleared to begin, we take the joints in the sequence agreed with you. Travel to smaller Scottish places like Thrumster is planned so the job is finished in one visit where possible, so photos, sizes and a full list matter. Outside work also needs a suitable weather window.
- First the joints are inspected, widths measured and the type of failure noted.
- You receive a fixed quote stating the product and the movement it is rated for.
- Phasing is agreed so decks, floors or entrances can stay in use where needed.
- We strip the old sealant or filler and prepare each face until it’s sound and dry.
- Backing rod or bond-breaker sets the depth, primer goes on where specified, and the sealant is applied and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
Preparing the site
- Tell staff and tenants when we will be in
- For older buildings, check the asbestos register before work
- Clear stock, furniture or equipment away from the joints
Quotes
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To ask for one, speak to us on 01277 525 020 or email drawings and photos.
Advice
Also in Thrumster
Thrumster: questions and answers
Is a hospital such as Wick Town and County Hospital somewhere you can work?
Yes, healthcare and care buildings are part of our work. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Is Thrumster off your patch?
Not at all. Thrumster is within our area. We work across every Scottish council area. Send photos and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Do the joint edges need to be sound before sealing?
The edges have to be sound. If they’re damaged, we’ll say so before any sealing.
What site paperwork can you supply?
Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm them with the quote.
How long will the new sealant last?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
Can you follow the specification on our project?
Yes. Include it with the drawings when you ask for a quote, and we’ll price the work to it, flagging anything that needs clarifying.
What happens if it rains on the day?
Sealing onto a damp surface leads to adhesion failure. The work is simply moved to the next suitable day.
When to bring in a specialist
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
Different surfaces, different methods
Internal floor movement joints
Floor joints include saw-cut joints and construction joints. A semi-rigid filler is common in trafficked industrial floors, with a flexible sealant where movement is larger.
Concrete and precast panel joints
Concrete edges can be weak or carry release agents that stop adhesion. We prepare the faces thoroughly and prime where the maker calls for it and check the edges for soundness as we go.
What affects the price in Thrumster
Sealant work doesn’t have a standard rate, since sites vary so much. What we look at:
- Whether the work must be split into stages
- Distance, for remote addresses
- The product specified
- How much existing material needs removing
There’s no price list, since every building and every scope is different. For a fixed figure, call for a quote and we will price your job on its own details.
Details that help us quote
There’s no need for a formal survey. A few details are enough to get going:
- The product your specification calls for
- Any dates the work must fit around
- How the joints are reached, and at what height
- Clear photographs of the problem areas
To get a fixed quote, phone 01277 525 020 or email the details over with the site address and an outline of the work. You can also send details through our quote form.
Expansion joint sealing in Thrumster: the local picture
Thrumster lies within about 1 mile of the sea. Open joints in coastal car parks and yards let in salt-laden water as well as grit, which is why split joints are worth sealing before the edges deteriorate. Thrumster is on Scotland’s drier eastern side. Frost and winter road salt still work into open joints in car parks and yards. Autumn is a sensible time to seal them.
For an estate such as Wick Town and County Hospital (3.2 miles north-east of Thrumster), the joints in ramps, decks and long building elevations all need attention over time. Around Thrumster, each joint gets a filler or sealant matched to what crosses it and how much it moves.
Thrumster is about 20 miles south-east of Thurso, in Highland. We send applicators to Thrumster for movement joints, handled exactly as we handle every other area. 256 places across Highland fall within our area, including Thrumster.
Commercial sites across KW1 are covered for movement joints. We cover commercial and managed buildings on Finlayson Place, Bella Mackay Place and Stewart Crescent and the roads nearby. If your building is just outside Thrumster, we cover Whiterow (3 miles north-east), Haster (4 miles north), Wick (4 miles north-east), Staxigoe (5 miles north-east) and Ackergillshore (6 miles north). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so give the site location in your enquiry.
What’s near Thrumster
Thrumster’s nearest station is Wick station, about 3.8 miles north. Nearby you’ll also find Wick Heritage Museum (3.8 miles north-east) and Wick Town and County Hospital (3.2 miles north-east). Not far away are Loch Hempriggs.
Building owners, agents and FMs in Thrumster
We work for building owners and managing agents on sealant work across single buildings or whole portfolios. Several sites can go on one quote, so there’s one set of paperwork to deal with.
FMs need a contractor who is easy to get on site. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we’ll confirm them with the quote.
Aftercare for building managers
Cleaning and maintenance staff play a part too. Pass these on to them:
- Inspect movement joints alongside other routine building checks
- Reopen bays and walkways only after the stated cure time
- Plan racking layouts so feet don’t land on a joint
- Record the sealant used and the date in the O&M file
Movement joints belong on the planned maintenance inspection list. A periodic look picks up tears and lifting before water gets in, when they’re still cheap to deal with. Should you spot a problem, you can speak to us on 01277 525 020 or send photos by email and send a picture.
An open joint fills with grit, and a joint full of grit can’t close. The edges then take the pressure and start to spall and the reseal becomes an edge repair as well. Keeping the seal sound avoids all of that.