Industrial and floor joint sealing in Skeabrae, Orkney Islands
Floor joint sealing for Skeabrae, from a contractor working since 2005. Fully insured and CHAS accredited.
- Untidy open joints in a retail unit
- Flexible sealant torn out by wheels
- Dock area joints that have failed first
Floor joint sealing for businesses in Skeabrae
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Diagnose, treat, sign off
We follow your site rules from the start: sign-in, induction and whatever permit system the building uses. With the paperwork done, the joints are worked through in the order agreed with your site contact. Tell us who will meet us and how to get in at your building near Skeabrae. That goes into the plan alongside the quote.
- We agree the traffic routes and phasing with your site team.
- Any joints with broken edges are flagged before work starts.
- Failed material and debris are removed and the joint cleaned.
- We fill the joints with the agreed product, finished level.
- Each area is handed back when ready for traffic.
Preparing the site
- Tell us which areas need to stay in use
- Move anything stored against the joints
- Share the asbestos register for older buildings
Ask for a quote
For a fixed quote, speak to us on 01277 525 020 or use the quote form with the site address and an outline of the work. You can also send details through our quote form.
Read more
How we handle floor joint sealing in Skeabrae
Forklifts and pallet trucks are hard on open joints. Each crossing knocks the unsupported edge, and over time a neat cut turns into a ragged channel. A properly filled joint carries the wheel over and protects both arrises. It also smooths the route for drivers and stock. We work on loading bays, forklift and pallet-truck routes and joints along racking aisles, and the usual reasons a site gets in touch are scruffy, dirty joint lines on a shop or showroom floor and loading bay joints breaking down. Facilities teams, main contractors and managing agents in Skeabrae tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
Around smaller Scottish places like Skeabrae, slabs needing attention are often in agricultural buildings, workshops, schools and hotels. Concrete slabs and yards there take vehicles and weather.
A 12-month guarantee applies to all our work in the Orkney Islands. Should something we installed fail, ring 01277 525 020 or email drawings and photos and we’ll come back to it.
- Where
- Skeabrae (KW17)
- Wider area
- Orkney Islands
- Cover
- 12 months on every job
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
What sets the cost
Quotes vary with the job. It mainly depends on:
- How much there is to seal
- How much existing material needs removing
- Joint width, depth and condition
- Travel to remote or island sites
Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
What to include in your enquiry
However big the job, these details speed things up:
- Your programme or deadline
- The product your specification calls for
- Asbestos survey details if the building is older
- The site address and postcode
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To ask for one, give us a call on 01277 525 020 or email drawings and photos.
Different surfaces, different methods
Flexible floor sealants
Flexible floor sealants come in several colours, and we will confirm what the specified product offers.
Forklift and pallet-truck routes
Trucks running over open joints wear wheels and shake loads. A filled joint lets wheels roll across and saves the edges.
Looking after the joints
Regular inspection catches problems early. Specifically:
- Hold traffic back until the product has cured
- Let us know what the floor is cleaned with
- Ask drivers not to drag forks or pallets
- Start with the dock areas, where joints fail soonest
Once cured, the joints get cleaned along with the slab. If you use strong chemicals or hot-water washing, mention it when we quote so we choose something that tolerates them.
Treating joints while the arrises are sound keeps the work simple. Once they have broken away, edge repair comes first, with more downtime and more disruption.
What else we do in Skeabrae
Questions about Skeabrae
Does a coastal location like Skeabrae affect which sealant is used?
It can. Wind-driven rain and, closer to the shore, salt air are harder on external joints. Product choice and preparation matter more, and sea-facing elevations are worth inspecting more often.
Must our site in Skeabrae stop work while the joints are done?
In the majority of cases the site keeps working. Joints are done in phases, a bay, aisle or deck at a time. The phasing plan comes with the quote.
Can you phase floor joint work around operations?
We phase it. We work aisle by aisle or zone by zone so the rest of the floor stays in use. Tell us your site hours and access windows and we will plan around them.
Can the sealant be colour-matched?
It depends on the product. Some ranges are wide, others limited, so we’ll confirm the colours available for the specified product with the quote.
What if there’s asbestos in the old mastic?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.
Do you cover Skeabrae?
Yes. We cover Skeabrae and the rest of the Orkney Islands, within our coverage of Greater London, South East England and Scotland. For a quote, ring 01277 525 020 or send photos by email.
Can you fill joints where the arrises have spalled?
We check the edges as part of the survey. Damaged edges are flagged up front, so nothing is filled that won’t hold.
Floor joint sealing in Skeabrae: the local picture
The sea is no more than about 3 miles from Skeabrae. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, which is why split joints are worth sealing before the edges deteriorate. For an island location such as Skeabrae, work is planned around ferry crossings and the weather. Send joint sizes and details of the traffic so the right materials come on the crossing.
Around Skeabrae, open joints collect water and debris, and the arrises are the next to go; we will tell you if the edges need repairing first. In and around Skeabrae, the right filler or sealant for each joint depends on the traffic and the movement it takes.
Skeabrae is about 13 miles north-west of Kirkwall, in the Orkney Islands. Anywhere in KW17, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Our the Orkney Islands coverage takes in 51 places, large and small.
Business premises anywhere in KW17 are within our area. If your building is just outside Skeabrae, we cover Dounby (1 mile east), Hourston (2 miles south-east), Scarwell (2 miles west), Russland (3 miles south-east) and Tenston (3 miles south). Where a site is remote or on an island, we plan travel and materials carefully, so include the location in your enquiry.
What’s near Skeabrae
A little further out are Earl's Palace (4.6 miles north-west) and Kirbuster Farm Museum (2.8 miles north). For a walk, there’s Orr Shun and Greeny Hill.
Why deal with it now?
An open joint is a modest filling job while its edges are sound. Wait until the edges have spalled and the concrete needs repairing before the joint can be filled, with longer closures to match. Renewing every failing joint on one visit is the sensible approach for a place like Skeabrae. Photos of each area help us quote the whole job.
Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote and we’ll put a fixed figure on it.
Why appoint us
- Public liability insurance in place
- CSCS-carded applicators
- Health and safety: CHAS accredited
- Specification-led, product-correct work
Take a look at our cost guide and how we’re accredited.
General trades versus a specialist
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we will confirm the paperwork you need with the quote.
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.