Fire stopping in Skeabrae
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Skeabrae and the surrounding area. Send photographs or drawings for a fixed quote.
- Penetration schedules that need working through
- Builders’ foam or ordinary silicone in compartment walls
- Head-of-wall gaps with no fire seal
Fire stopping in Skeabrae
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
How we handle fire stopping in Skeabrae
Sealant is the specified answer for plenty of openings, such as metal pipes, cables and some small ducts where the detail covers them. Other openings need collars, wraps, batts, pillows or boards. We use sealant where it is the specified product, and we tell you when a detail calls for something else. The enquiries we see most involve fire stopping installed outside its tested range and seals disturbed by maintenance and left open, across cable penetrations, small duct penetrations where the tested detail allows and service gaps in risers. Whether you call it commercial sealant work, mastic application or joint sealing, in Skeabrae it comes down to the same thing: the right product in a properly prepared joint.
Refurbishments in small hotels, schools and care homes around places like Skeabrae can leave gaps around new services. A round of checks after M&E work is good practice, and any gaps found are sealed where fire-rated sealant is specified.
We sign every job off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.
- Location
- Skeabrae (KW17)
- Region
- Orkney Islands
- Guarantee
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Site staff or a sealant specialist?
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
When to call us in Skeabrae
Fire stopping can get squeezed at the end of a programme, or done by whoever is on site. That is how unsuitable products and improvised details end up in compartment walls, which then have to be put right.
Common reasons buildings call us in:
- Old intumescent sealant that has split away
- Seals disturbed by maintenance and left open
- Open linear gaps along the top of fire-resisting walls
- Unsealed openings around new pipes and cables
Hotels like Smithfield Hotel (1.2 miles east of Skeabrae) are refurbished in phases, and each phase can open up compartment walls.
What your quote should include
- What level of public liability insurance do they hold?
- How they’ll work around occupants
- Is the sealant right for the movement and the substrate?
- The terms of the workmanship guarantee
Other services in Skeabrae
Questions we are asked in Skeabrae
What do Scotland’s building standards say about service penetrations in Skeabrae?
The non-domestic Technical Handbook, clause 2.1.14, expects a penetration to keep at least the wall or floor’s fire resistance period, with proprietary products tested for the use they’re put to. Design sits with the designer and the verifier; installation to the tested detail is our part.
Do you work on the island where Skeabrae is?
Yes. Our area covers all of Scotland, cities, towns and islands alike, and that includes island locations such as Skeabrae. Ferry times and the weather set the plan, so we ask for photographs and a full list first.
Does weather matter for sealant work?
For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so damp, frosty or very cold days can stop external work. Internal work is rarely affected.
How soon can the area be used again?
We’ll confirm how long the chosen product needs to cure, and flag anything to keep off until it has cured.
How long does a typical visit take?
The duration is planned around your programme and the access we’re given. We’ll give you an estimate of time on site when we quote.
Are you insured?
Yes. We are fully insured, including public liability cover.
Are your applicators CSCS-carded?
Yes. Our applicators hold CSCS cards, as many construction sites ask for.
From enquiry to sign-off
Inspect, seal, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then the work is carried out to the specified product and detail, and we finish with a walk round so the work can be signed off. For a building near Skeabrae, directions, keys and a contact on the day are worth sorting early. That goes into the plan alongside the quote.
- The specification and schedule come first, so we know which details apply.
- Access, permits and the order of areas are agreed with the site team.
- We compare every service penetration with its tested detail before sealing.
- Unsuitable material is removed and the opening cleaned first.
- The specified backing and sealant go in to depth and are finished neatly.
- Anything outside the detail is reported to you rather than sealed.
Getting the site ready
- Flag any permit to work we’ll need
- For older buildings, check the asbestos register before work
- Agree which areas must stay open
Ask for a quote
For a fixed quote, speak to us on 01277 525 020 or use the quote form, telling us the site location and the nature of the job. You can also send details through our quote form.
Advice
What sets the cost
We price every job individually. The things that drive the figure:
- Any access equipment needed
- Specialist products, such as fire-rated or hygienic sealants
- Quantities, in metres or numbers
- Whether old sealant has to be cut out first
The price depends on how many linear metres there are, what has to come out first and how the joints are reached. Call for a quote once you have the details.
Details that help us quote
There’s no need for a formal survey. These details are enough to start:
- Approximate linear metres or a joint schedule
- The postcode of the building
- What the building is and how it’s used
- Whether an asbestos survey exists
The quickest route to a quote is a few photos and the site postcode. Upload them with the quote form, or call the office on 01277 525 020 or email the details over if you’d rather talk the job through.
Fire stopping in Skeabrae: the local picture
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, with proprietary products, intumescent ones included, tested for their end use. Our part is installing the specified fire-rated sealant to its tested detail. For an island location such as Skeabrae, work is planned around ferry crossings and the weather. The specification and photos of each penetration let us bring the right products first time.
Around Skeabrae, we install fire-rated and intumescent sealant to the product’s tested detail wherever it is the specified product.
Skeabrae is about 13 miles north-west of Kirkwall, in the Orkney Islands. Across the KW17 postcode area, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. We work across 51 places in the Orkney Islands, from busy centres to rural villages.
If you need fire stopping in KW17, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Sites close to Skeabrae are covered too, including Dounby (1 mile east), Hourston (2 miles south-east), Scarwell (2 miles west), Russland (3 miles south-east) and Tenston (3 miles south). For island and remote sites, travel and materials need planning ahead, so the full address helps from the start.
What’s near Skeabrae
Well-known places in the area include Earl's Palace (4.6 miles north-west) and Kirbuster Farm Museum (2.8 miles north). The countryside around Skeabrae includes Orr Shun and Greeny Hill.
What the job involves on each surface
Small ducts
We seal around ducts only within what the tested detail covers. The ductwork, its supports and any dampers are for the ductwork contractor.
Linear joints
Linear joints run along the head of a wall, at a slab edge or between two fire-resisting elements. BS EN 1366-4 testing sets the joint widths, depths, backing and movement a seal covers.
When something else is needed
A few problems need another trade or a different fix, and we say so rather than covering them up:
- Designing or specifying fire stopping, which sits with the designer or fire engineer
- Construction that lacks the fire resistance the seal relies on
- Approving the work on behalf of building control
If you’re not sure, just ring 01277 525 020 or email us and we will give you a straight answer before you book.
Joints and surfaces we work on
- Service gaps in risers
- Cable penetrations
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Pipe penetrations
- Joints between fire-resisting walls and floors