Industrial and floor joint sealing in Logierait, Perth and Kinross
Floor joint sealing and filling in warehouses, factories and industrial units throughout Logierait and nearby, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.
- Open saw cuts full of debris
- A rough ride across broken joints
- Soft sealant dragged out of trafficked joints
Floor joint sealing near Logierait
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
When to bring in a specialist
Redoing a failed joint normally costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we will confirm the paperwork you need with the quote.
How we handle floor joint sealing in Logierait
Floor joint sealing for us covers warehouse aisles, loading bays, production halls, retail floors and showroom slabs. Pricing depends on the length of joint, how worn the edges are and when we can get in, and the quote is fixed before we mobilise. Site teams most often ask us about open saw cuts full of debris and trucks and loads jolting over damaged joints, on loading bays, construction joints and retail and showroom floors. For commercial sealant work in Logierait, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
Around smaller Scottish places like Logierait, slabs needing attention are often in agricultural buildings, workshops, schools and hotels. Concrete slabs and yards there take vehicles and weather.
We stand behind the joints we seal with a 12-month guarantee. It covers how we prepared and applied the sealant, and we come back if anything isn’t right.
- Place
- Logierait (PH9)
- Region
- Perth and Kinross
- Guarantee
- A 12-month guarantee
- Quote
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
What we are called out for in Logierait
Concrete slabs shrink as they dry out, and the saw cuts are there so it cracks in straight, controlled lines. As the panels contract, the joints widen so a filler put in early may separate along one side.
Common reasons buildings call us in:
- Old filler gone hard, cracked or loose
- A gap opening alongside old joint filler
- Loading bay joints breaking down
- Flexible sealant torn out by wheels
Hospital campuses such as Pitlochry Community Hospital, 4.3 miles to the north-west of Logierait, grow in stages, leaving movement joints wherever new blocks meet old.
Questions to ask before you book
- Which product they’ll use, and why it suits the joint
- Whether their applicators hold CSCS cards
- Whether old or failed sealant will be cut out, not overlaid
- Are they CHAS accredited or on Constructionline?
Floors, slabs and movement joints in Logierait
The east of Scotland, where Logierait is, gets less rain than the west. Cold winters and gritting are hard on any yard or deck joint left open. Resealing before the cold months helps protect the edges.
Around Logierait, each joint gets a filler or sealant matched to what crosses it and how much it moves.
Logierait is about 14 miles west of Blairgowrie and Rattray, in Perth and Kinross. Logierait sits inside our coverage and the rest of Perth and Kinross, with the same fixed quotes and 12-month guarantee as everywhere else. Our Perth and Kinross coverage takes in 114 places, from busy centres to rural villages. Our Dundee page has more on work in that area (29 miles or so).
Anyone looking for floor joint sealing in PH9 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. If your site is on Clais-an-Deor and Murray Terrace or close by, we can quote for floor joints. If your building is just outside Logierait, we cover Ballinluig (1 mile north-east), Dowally (3 miles south-east), Grandtully (4 miles west), Little Ballinluig (4 miles west) and Port na Craig (4 miles north-west). Bigger towns within reach include Blairgowrie and Rattray (14 miles east), Rattray (14 miles east), Aberfeldy (7 miles west), Stanley (14 miles south-east) and Bankfoot (12 miles south-east).
Local landmarks in Logierait
The closest station to Logierait is Pitlochry station, roughly 4.3 miles north-west of the centre. Well-known places in the area include Tom na Croiche (less than half a mile north-east) and Pitlochry Community Hospital (4.3 miles north-west). The countryside around Logierait includes Loch Skiach.
Nearby places to Logierait
More services for Logierait
What the job involves on each surface
Semi-rigid joint fillers
For trafficked warehouse joints, semi-rigid fillers are common. We place them to depth and trim them level with the slab.
Flexible floor sealants
Movement joints, joints at walls and joints in lightly trafficked areas often take a flexible sealant. Closed-cell backing rod goes in first, keeping the bead shallow and gripping only the two faces.
Diagnose, treat, sign off
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Joint faces are cleaned back to sound, dry surfaces, the manufacturer’s primer is applied where it’s called for, and the sealant is tooled off neatly. Jobs near Logierait are often grouped with others in the same area. Tell us how flexible your dates are.
- A floor survey records every joint, its edges and what crosses it.
- You receive a fixed quote showing products and phasing.
- Each joint is cut or routed back to clean, sound concrete.
- Dust is vacuumed out and primer applied where specified.
- The joint is filled to its specified depth and trimmed level.
- Zones reopen once cured and the work moves on.
Preparing the site
- Tell us what induction or permit system the site runs
- Send any specification or drawings in advance
- Warn occupants and staff about the work
Request a quote
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we will fill any gaps with a visit.
Related advice
FAQs: Logierait
Is Logierait too far out for you?
Not at all. Logierait is within our area. We work across every Scottish council area. We plan jobs in smaller places so return trips are kept to a minimum.
Can you work on a hospital site such as Pitlochry Community Hospital?
Yes, hospitals are one of the sectors we cover. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
How do you choose the sealant?
If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Will you just go over the old sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.
When can forklifts run over new joint filler?
Each product has its own cure time, and cold floors slow it down. Phasing is planned with that in mind.
How many days will you need on site?
It depends on the scope, but the work typically takes between a day and a number of days, set by the joint lengths, the edge condition and the phasing you need. Larger or phased jobs take longer, and we will give you a timescale with the quote.
What site paperwork can you supply?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we’ll confirm with the quote.
What happens if it’s left?
Open joints are where dirt collects, out of reach of the floor cleaner. In shops, showrooms and clean production areas that matters for hygiene and appearance. Flush, filled joints leave nothing for cleaners to dig out. Renewing every failing joint on one visit is the sensible approach for a place like Logierait. Photos of each area help us quote the whole job.
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well.
What you get with us
- One contact handling all your sites
- Constructionline member
- Health and safety: CHAS accredited
- Our applicators hold CSCS cards
What sets the cost
These are the things that shape the price:
- Whether the work must be split into stages
- The product specified
- Quantities, in metres or numbers
- Induction, permit and paperwork requirements
The work involved drives the cost: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a quote.
What we need to price the job
A good diagnosis starts with the right details. Tell us:
- Rough lengths or quantities, or drawings if you have them
- Whether the building will be occupied during the work
- The asbestos register, for older buildings
- Access details, including height
To get a fixed quote, ring 01277 525 020 or send details through our quote form, telling us the site location and the nature of the job. Our quote form is another easy route.