The Mastic Doctor team standing beside their branded vans outside an office building
Perth and Kinross · Scotland

Facade and window perimeter sealing in Logierait, Perth and Kinross

Our CSCS-carded applicators take on facade joint and window perimeter sealing on commercial buildings in Logierait. Send details for a fixed quote.

  • New sealant peeling off old mastic
  • Cold air coming in at window perimeters
  • Staining on stone next to old sealant
1
Send details
Send the specification, photos or a marked-up plan.
2
Get a quote
A fixed quote for the work, with the scope in writing.
3
We seal
The right sealant, to the right depth, neatly finished.
4
Guaranteed
12-month guarantee on our workmanship.
Covering the South East & Scotland
Constructionline member
Fully insured: £5m PL

Facade sealing in Logierait

Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.

Contractors’ notes for Logierait

Projects in Logierait follow Scotland’s building regulations, with the local authority acting as verifier. The mastic package follows the approved specification. Logierait is in the east of Scotland, which is drier than the west. Winter mornings can still bring frost and condensation on steel and glass. External dates keep a little give.

Hospital estates such as Pitlochry Community Hospital, 4.3 miles north-west of Logierait, tend to grow and change in phases, often next to occupied wards, so facade and perimeter sealing has to fit the estates team’s plan.

Logierait is about 14 miles west of Blairgowrie and Rattray, in Perth and Kinross. Businesses, contractors and managing agents in Logierait can call on us for facade joints. Across Perth and Kinross, 114 places are covered, including Logierait. Dundee is covered too, some 29 miles away.

We cover the PH9 postcode districts. If your site is on Clais-an-Deor and Murray Terrace or close by, send details and we’ll quote for facade joints. Close to Logierait, our area also takes in Ballinluig (1 mile north-east), Dowally (3 miles south-east), Grandtully (4 miles west), Little Ballinluig (4 miles west) and Port na Craig (4 miles north-west). A short drive away, we cover Blairgowrie and Rattray (14 miles east), Rattray (14 miles east), Aberfeldy (7 miles west), Stanley (14 miles south-east) and Bankfoot (12 miles south-east).

Near you in Logierait

For rail, the closest station is Pitlochry station, about 4.3 miles north-west. Nearby you will also find Tom na Croiche (under half a mile north-east) and Pitlochry Community Hospital (4.3 miles north-west). Not far away are Loch Skiach.

Map of Logierait © OpenStreetMap contributors

Facade sealing in Logierait, done properly

Every facade quote starts with how the joints will be reached. Let us know what access exists or is planned, and any site rules we need to work around, and we’ll fit the work around it. The enquiries we see most involve air leaks through failed facade joints and gaps between rainscreen or cladding panels, on perimeter joints where frames meet the structure, stone and brick facade joints and window and door perimeters. Facilities teams, main contractors and managing agents in Logierait tend to want the same three things: a fixed quote, no surprises on site and a 12-month guarantee behind the result.

For a site around Logierait, we plan the mastic in as few trips as the programme allows. Send drawings, photographs and the programme so everything needed arrives on the first day.

We stand behind the joints we seal with a 12-month guarantee. That covers our preparation and application, and if something we did falls short, we return to it.

Location
Logierait (PH9)
Region
Perth and Kinross
Cover
12 months on every job
Quote
A fixed quote before we start
Call
01277 525 020
Updated
3 November 2026
The Mastic Doctor team standing beside their branded vans outside an office building

Keeping the joints sound

To get the most from the new sealant:

  • Inspect facade joints on a regular cycle
  • Check the asbestos register before old mastic is disturbed
  • Record the product and colour used on each elevation
  • Report water ingress at frames as soon as it shows

If new signage, brackets or services are fixed through a sealed joint, the seal needs making good. Ask the installer to reseal it properly using a matching sealant.

In pre-2000 buildings, check the asbestos register before old sealant is cut out. Some older mastics contain it, and work stops until it’s tested if it’s suspected.

From enquiry to sign-off

We bring the products specified for the job, along with primers and backing rod. Joint faces are cleaned back to sound, dry surfaces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. Tell us who will meet us and how to get in at your building near Logierait. We will confirm the plan with the fixed quote.

  1. We look at the joints, the drawings and the access before pricing.
  2. The old bead is cut away completely, not overlaid.
  3. Both faces are cleaned and, where the product needs it, primed.
  4. Closed-cell rod fixes the depth, and the sealant grips two sides only.
  5. The new sealant goes in and is tooled firmly onto both faces.
  6. We walk the finished joints with you before handing over.

What we need from you

  • Have the specification and drawings to hand
  • Arrange parking or a loading space
  • Tell us what induction or permit system the site runs

Get a fixed quote

Need a figure for a tender or a budget? Send the scope and any drawings, and we will return a fixed quote you can plan around. For a chat about it beforehand, ring 01277 525 020 or send photos by email.

Get a price

Read more

When something else is needed

Before quoting, we check that sealant is the right answer. It isn’t the answer for:

  • Cracked or spalling substrates that need repair before sealing
  • Installing or repairing glazing systems
  • Damp caused by condensation inside the building

If you are not sure, just speak to us on 01277 525 020 or send photos by email and we’ll give you a straight answer before you book.

What we seal

  • Window and door perimeters
  • Cladding panel joints
  • Perimeter joints where frames meet the structure
  • Coping and flashing joints
  • Stone and brick facade joints
  • Shopfront frames

What we are called out for in Logierait

Overlaying old sealant is a common shortcut that fails quickly. Cured silicone won’t accept a new silicone bead, and the patch soon lifts.

It’s worth sending us details if you spot any of the following:

  • Damp patches beside frames after rain
  • Draughts around frames and panels
  • Perimeter sealant that has split or peeled away
  • Old perimeter mastic that has dried out

Hotels like Ballinluig Hotel, 0.6 miles to the north-east of Logierait, rarely close for long, so refurbishment mastic is phased floor by floor.

What your quote should include

  • Their public liability cover
  • How the joint faces will be prepared and primed
  • What the guarantee covers, and for how long
  • What site paperwork they can supply

How to choose a sealant contractor

Questions about Logierait

Can you take on a job at a hospital such as Pitlochry Community Hospital?

Yes, provided the work is planned with the site’s estates team. We follow the site’s permits, sign-in and infection-control procedures in every area.

Can you keep pace with our programme in Logierait?

Yes, we work to the programme and the sequence the site sets. Let us know which documents your site asks for, and we’ll confirm them alongside the quote.

Can you work while the building is occupied?

Yes, as long as we plan it. Tell us your site hours and access windows and we will plan around them.

Do you need to see the site first?

That depends on the size and complexity of the job. Straightforward work can often be priced from photos and measurements, and bigger or more complex jobs typically get a visit.

Do you guarantee your work?

Yes. Workmanship is guaranteed for 12 months.

Can you work in cold or wet weather?

Rain and frost can pause external sealing. The programme allows for it and we tell you if the forecast changes things as the work goes on.

Do you offer coloured sealant?

In many cases, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We confirm what’s available for the specified product when we quote.

What affects the price in Logierait

Sealant work doesn’t have a standard rate, since sites vary so much. What we look at:

  • Access and working height
  • The site’s rules and procedures
  • How much existing material needs removing
  • Location, for remote and island sites

There’s no price list, because the scope varies so much from one building to the next. Call for a quote.

Sending details for a quote

The more we know, the firmer the quote. Helpful details to send:

  • Any dates the work must fit around
  • Whether an asbestos survey exists
  • What the building is and how it’s used
  • A wide shot and a close-up of the area

To get a fixed quote, give us a call on 01277 525 020 or use the quote form. Our quote form is another easy route.

What the job involves on each surface

Brick and stone facades

Stone can absorb plasticisers from the wrong sealant. We use a product suitable for the stone where the specification names one.

Perimeter joints at frames and structure

These frame-to-structure joints take a lot of movement and weather. We cut them out, prepare both faces and reseal to the specification with a product suited to glazing perimeters.

Accreditations

Trusted. Accredited. Insured.