Ifold floor joint sealing
We carry out floor joint sealing and filling in warehouses, factories and industrial units in Ifold. Send photographs or drawings for a fixed quote.
- A rough ride across broken joints
- Scruffy, dirty joint lines on a shop or showroom floor
- Joint edges breaking up under truck wheels
Floor joint sealing for businesses in Ifold
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
General trades versus a specialist
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Certain joints really need a specialist: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong usually costs more in the end than doing them right.
About our floor joint sealing in Ifold
Sometimes the concrete either side of a joint has already spalled. A filler laid against broken edges has nothing sound to grip, so if the edges need repair before any filling, we will say so and leave that decision with you. If you have loading bay joints breaking down and brittle joint filler breaking up, we can put it right, whatever the surface. A single leaking joint is often how a building in Ifold first comes to us: we look at the rest while we are there and tell you what we find.
In and around smaller places like Ifold, the concrete floors we see are often in converted farm buildings, small workshops and storage units. Whether it’s a farm store turned workshop or a storage unit, the joints need a product that suits the traffic.
A 12-month guarantee applies to all our work in West Sussex. Should something we installed fail, call the office on 01277 525 020 or email drawings and photos and we will come back to it.
- Place
- Ifold (RH14)
- Region
- West Sussex
- Cover
- 12 months on every job
- Quote
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Cost factors for floor joints
These are the things that shape the price:
- Induction, permit and paperwork requirements
- Travel to remote or island sites
- Backing rod, priming and other preparation
- Which sealant the job calls for
There’s no price list, because the scope varies so much from one building to the next. Call for a quote.
Before you send an enquiry
Good information means a firmer quote. Helpful details to send:
- Clear photos of the problem areas
- Your programme or deadline
- Asbestos survey details if the building is older
- Whether the building will be occupied during the work
For a fixed quote, give us a call on 01277 525 020 or email a schedule or drawings, telling us the site location and the nature of the job. Our quote form is another easy route.
Why it’s worth doing now in Ifold
While the arrises are intact, filling a joint is straightforward. Left until they break, it needs an edge repair before any filling can start which means more downtime in that zone. Converted and older buildings near places like Ifold tend to move, and aged sealant cracks. A sealant with the right movement capability, correctly sized, lasts far better.
A quote for floor joints depends on quantities, condition and access, plus any specification you are working to. Call for a quote.
Why appoint us
- CHAS accredited
- Constructionline member
- 12 months’ guarantee on every job
- One contact handling all your sites
See how commercial sealant jobs are priced and our accreditations and insurance.
Ifold: questions and answers
What documents will you need to give us for a job in Ifold?
We will confirm the paperwork you need, such as RAMS, our insurance certificate and CSCS details, with the quote. We hold £5m public liability insurance, are CHAS accredited and a Constructionline member, and our applicators are CSCS-carded.
Does a site in Ifold have to shut while its joints are sealed?
Rarely. Work is phased around your operations. The phasing plan comes with the quote.
Is it fine to apply new sealant on top of old?
No. Overlaying old sealant is a frequent cause of early failure, so it all comes out first.
Do you use semi-rigid filler or flexible sealant on floor joints?
We decide joint by joint. Where hard wheels cross, a semi-rigid filler is usually right and perimeter or movement joints need flexibility. The quote sets out what goes where.
How long will the new sealant last?
Nobody can honestly give a figure in years, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
Why is there a gap next to the joint filler?
On newer slabs, the concrete keeps shrinking after the joints are filled, so a semi-rigid filler can part from one face. It is typically dealt with by topping up.
Is the floor joint work guaranteed?
There is a 12-month guarantee on our workmanship and the work is covered by public liability insurance.
Joints that move: notes for Ifold
Ifold is in the South East, one of the UK’s drier regions. External joints still wait for dry conditions, and winter de-icing salt on car parks and ramps works into any open joint. Ifold is about 35 miles from central London. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital.
For floors and slabs around Ifold, the product is chosen for the traffic and the movement at each joint. Schools such as Loxwood Primary School have movement joints in their walls and floors that are easy to overlook.
Ifold is about 9 miles west of Horsham, in West Sussex. We cover commercial sites throughout Ifold, whether it’s a single job or part of a planned programme. We work across 373 places in West Sussex. There’s a separate page for Brighton, about 24 miles away.
We cover the RH14 postcode districts for floor joints. For a building on Birchwood Close, The Drive and Wildacre Close or nearby, send details and we will quote for floor joints. If your building is just outside Ifold, we cover Loxwood (1 mile north-east), Plaistow (1 mile west), Alfold Bars (2 miles north-east), Mackerel's Common (2 miles south) and Durfold Wood (2 miles north-west). Bigger towns within reach include Crawley (15 miles east), Horsham (9 miles east), Broadfield (14 miles east), Storrington (11 miles south), Billingshurst (5 miles south-east) and Bewbush (14 miles east).
Near you in Ifold
For a walk, there’s Shillinglee Lake.
Also in Ifold
Looking after the joints
Once the work is signed off, a little attention goes a long way:
- Stop forks and pallets being dragged across joints
- Respect the cure time before traffic returns
- Put loading bays at the top of the list
- Sweep debris out of open joints until they can be filled
Ask drivers not to drag forks or pallets along the floor. Even a well-filled joint can be damaged by steel scraping along it if it keeps happening.
Every vehicle on a busy aisle hits a damaged joint. Sorting it early looks after your equipment as well as the slab.
When it isn’t the sealant
We check first that sealant really is the fix. It isn’t the answer for:
- Broken concrete either side of the joint
- Cracks across panels caused by settlement or overload
- Uneven floors that need grinding or levelling
If in doubt, call the office on 01277 525 020 or email a schedule or drawings and we’ll say what we think before you book.
Where we work in Ifold
- Forklift and pallet-truck routes
- Joints along racking aisles
- Saw-cut induced joints
- Retail and showroom floors
- Construction joints
- Loading bays
On site: what to expect
At the end of each section, we remove the tape, clean down and inspect every joint with your site contact. Where the sealant needs time to cure before use, we tell you and sign the area. Jobs in and around smaller places like Ifold are normally planned as a single visit, so photos and measurements up front really help. Then the right materials arrive with us.
- First comes a walk of the floor to record joint sizes, broken edges and traffic routes.
- The quote fixes the price, names the filler or sealant and shows how the floor will be zoned.
- Old filler, debris and contamination are cut or routed out back to clean concrete.
- Dust is extracted from the joint and primer applied where the manufacturer specifies it.
- We fill each joint to depth and finish it flush so wheels roll straight across.
- The area is handed back once it has cured enough to take traffic.
Getting the site ready
- Tell us what induction or permit system the site runs
- Tell staff and tenants when we’ll be in
- Arrange parking or a loading space
Request a quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to call 01277 525 020 or email us with what you know.