West Sussex · England
Commercial sealant contractors in RH14
Our applicators cover all of the RH14 postcode district, including Billingshurst, Wisborough Green and Loxwood. Every joint is properly prepared, with a 12-month guarantee.
Sealant work in RH14
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Where we work in RH14
- Billingshurst
- Wisborough Green
- Loxwood
- Ifold
- Kirdford
- Plaistow
- Five Oaks
- Adversane
- Newpound Common
- Alfold Bars
- Durfold Wood
- Coneyhurst
- Mackerel's Common
- The Haven
What we do in RH14
- Construction and new-build mastic
- Commercial washroom and wet-area sealing
- Fire-rated sealing and fire stopping
- Coloured and colour-matched sealant
- Expansion and movement joint sealing
- Commercial sealant contractors
- Mastic sealing for building owners and managing agents
- Facade and window perimeter sealing
- Industrial and floor joint sealing
- Every service
Let us know the job and your postcode for a fixed quote: speak to us on 01277 525 020 or send photos by email.
Neighbouring districts
Across West Sussex
All places in West Sussex
All areas
Commercial sealant contractors across RH14: what to expect
On older buildings, particularly those put up before 2000, some old mastics and sealants may contain asbestos. We ask to see the asbestos register or survey before old sealant is disturbed, because the duty to manage asbestos sits with the dutyholder. If a material is suspected, work stops until it’s tested (removing asbestos-containing materials isn’t something we do). We work on window and door perimeters, floor and threshold joints and movement joints in walls and floors, and what we are called in for most is damp patches where an external joint has failed and sanitary sealant that has gone black and patchy.
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. On site, the work typically takes as long as the agreed scope needs, from a single visit to a programme spread over several weeks, and our waste is bagged and taken away as we go.
- First, details reach us through the quote form or a site visit.
- The cause is diagnosed and the scope priced as a fixed quote.
- Work is phased around your occupiers where areas need to stay in use.
- Old sealant is cut out completely, never sealed over.
- Each joint gets a suitable sealant, laid to depth and tooled.
- A final walk-round, then the 12-month guarantee applies.
Pricing in RH14
Cost follows what’s involved: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a quote and we’ll explain how it’s made up.
Why appoint us
- Our applicators hold CSCS cards
- Fully insured
- Old sealant cut out, never sealed over
- 12-month guarantee on workmanship
Quotes
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To ask for one, give us a call on 01277 525 020 or email us.
Landmarks near Billingshurst
Locally, jobs take us to sites close to The Weald School, Billingshurst Primary School and Billingshurst Unitarian Chapel, among other places. Billingshurst has its own railway station: Billingshurst station. For a walk, there’s The Mens.
Where commercial joints are in RH14
From Billingshurst, Wisborough Green and Loxwood outwards, RH14 has a broad spread of commercial premises: shops, offices, hotels, restaurants and units. Because we cover all of it, multi-site occupiers can bring every building under one quote, with colours matched site to site where the brand needs it.
Around the motorway corridors of the South East, business parks and industrial estates are common, and RH14 is part of the area we cover.
Billingshurst: If you have premises on more than one site, say at Rosier Commercial Centre and Gillman's Industrial Estate, one contractor and one quote can cover both. If you run an office at a site such as Rosier Commercial Centre, 0.6 miles south-east of Billingshurst, the sealant at reception desks, tea points and frames ages with each fit-out.
Commercial clients in RH14
For main contractors, we work as the sealant subcontractor. Programme, specification and site rules come first.
Agents, factors and owners’ representatives all follow the same route: send the details, accept a fixed quote, and we carry out and guarantee the work. Keys, access and contacts can be agreed in advance.
Why deal with it now?
Some managers wait for a fit-out before touching the mastic. For internal joints that are only cosmetic, that can make sense, but a joint letting water in now keeps doing damage until the refurb arrives. We can seal the urgent joints now and leave the rest for the programme.
What your quote should include
- Who will actually carry out the work
- Is the sealant right for the movement and the substrate?
- How long is the guarantee, and what does it include?
- How joint depth will be controlled
Aftercare for building managers
Regular inspection catches problems early. In particular:
- Ask cleaners to use a soft cloth and mild cleaner on sealant
- Put external and wet-area joints on a regular inspection round
- Make sure contractors see the asbestos survey before cutting out old mastic
- Keep barriers up until the new sealant has cured
Brief your cleaning team on the joints that have been resealed. Scourers, blades and harsh products shorten a bead’s life; a mild cleaner is all most joints need.
Each spell of wet weather pushes more water through an open joint. It can run into cavities, insulation and internal finishes long before anyone sees a stain. Resealing early keeps the problem in the sealant and out of the building.
Doing it in-house
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.
Different surfaces, different methods
Washrooms and toilets
Black sealant in a toilet block is normally beyond cleaning. Replacement is the fix: strip, clean, dry and reseal.
Facade and cladding joints
On a facade, a failed joint is often only visible close up. Photos from a closer viewpoint help us price, and we will confirm the colours available for the specified product.
RH14: questions and answers
How long before the joints can be used?
Curing time varies by product, and we confirm it on the day, and sign any area that should be left alone.
Can weather delay the job?
Outside, yes. The joint has to be dry and within the product’s temperature range, so damp, frosty or very cold days can stop external work. Internal work is rarely affected.
How long does a job like this take?
That varies with the scale of the job, though a typical visit normally takes as long as the agreed scope needs, from a single visit to a programme spread over several weeks. Larger or phased jobs take longer, and we will give you a timescale with the quote.
When is resealing likely to be due?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Sealant joints are maintenance items, so inspect them regularly.
Do you work in RH14?
Yes. RH14 is in our area, within our coverage of Greater London, South East England and Scotland. To discuss a job, give us a call on 01277 525 020 or use the quote form.
Do you work directly for building managers?
Yes. You can send details through our quote form, and we will confirm any paperwork you need with the quote.
Is failed sealant stripped out, or sealed over?
Full removal is part of every quote. A bead laid on old silicone peels away and isn’t worth paying for.