Industrial and floor joint sealing in Ferryden, Angus
Work needed on a floor joint in Ferryden? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Broken arrises where pallet trucks cross
- Untidy open joints in a retail unit
- Filler that has parted from one face
Floor joint sealing near Ferryden
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
What sealant work can’t fix
A few problems need another trade or a different fix, and we say so rather than covering them up:
- Spalled arrises, which need an edge repair first
- Unstable slabs moving under traffic
- Damaged or worn floor coatings and screeds
If you are not sure, just phone 01277 525 020 or email the details over and we’ll give you a straight answer before you book.
Joints and surfaces we work on
- Loading bays
- Construction joints
- Joints along racking aisles
- Forklift and pallet-truck routes
- Saw-cut induced joints
- Retail and showroom floors
About our floor joint sealing in Ferryden
Floor joint sealing for us covers warehouse aisles, loading bays, production halls, retail floors and showroom slabs. Each job is priced from the metres of joint, their condition and the access windows we get and the figure is fixed before work begins. Most enquiries involve failing joints at loading bays and dock doors and cracked and crumbling joint fill, across forklift and pallet-truck routes, joints along racking aisles and saw-cut induced joints. Looking for mastic applicators who cover Ferryden? We have been sealing commercial buildings since 2005, with CSCS-carded applicators.
Weather windows decide external joint work around a place like Ferryden: dry faces and the right temperature are essential. Inside slabs aren’t affected and can be scheduled around the occupier.
We stand by our work with a 12-month guarantee. It covers how we prepared and applied the sealant, and we come back if anything isn’t right.
- Place
- Ferryden (DD10)
- Region
- Angus
- Guarantee
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
How a job runs
At the end of each section, the masking comes off, the area is cleaned and every joint is checked with your site contact. Where the sealant needs time to cure before use, we tell you and sign the area. Travel to smaller Scottish places like Ferryden is planned so the job is finished in one visit where possible, so photographs, sizes and a full list matter. External joints need a dry spell as well.
- We agree the traffic routes and phasing with your site team.
- We point out joints whose edges need repairing first.
- We clear each run back to clean concrete.
- We fill the joints with the agreed product, finished level.
- Each area is handed back when ready for traffic.
Getting the site ready
- Agree which areas must stay open
- Let building users know which areas are affected
- Confirm the product named in the specification
Getting a fixed quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to call the office on 01277 525 020 or send details through our quote form with what you know.
Advice
Questions we are asked in Ferryden
Is Ferryden too far out for you?
No. Small places get the same service as large ones. Every Scottish council area is within our area. Send photos and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Does the sea air around Ferryden change the choice of sealant?
It can, yes: buildings near the sea take more wind-driven rain, and salt in the air nearer the shore. We check the specified product suits the exposure and pay close attention to preparation.
Who decides which product is used?
A specification, where there is one, decides it. Without one, the joint decides: its movement, its surfaces and what it has to cope with.
What if there’s asbestos in the old mastic?
The duty to manage asbestos sits with the building’s dutyholder, so we’ll ask for the register before work on an older building. If anything suspect turns up, we stop until it’s tested.
Are you insured?
Yes. We are fully insured, and the certificate can go with your quote.
Are you CHAS accredited and on Constructionline?
Yes. We are CHAS accredited, we’re a Constructionline member and we use CSCS-carded applicators.
How long do sealant joints last?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
Work for main contractors and building owners
Whether you’re a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
When you manage a building on behalf of an owner, you need clear quotes and clear reporting. You get a fixed quote, an agreed scope and a walk round at the end.
Traffic, movement and joints around Ferryden
Ferryden is within about 1 mile of the coast. Open joints in coastal car parks and yards let in salt-laden water as well as grit, so a failed joint lets more in and the edges break up sooner. The 3 miles around Ferryden take in two named trading estates, business parks or retail parks. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest.
For a school such as Montrose Academy, playground and building joints can be done in the holidays. Warehouse floors on estates like Broomfield Industrial Estate, 1.8 miles north of Ferryden, carry pallet trucks and forklifts over every saw-cut joint. Another example is Forties Road Industrial Estate, 2.2 miles north of Ferryden, where floors and yards would be done in stages around the occupiers.
Ferryden is about 1 mile south of Montrose, in Angus. Our applicators travel to Ferryden for work on floor joints. Ferryden is one of 65 places in Angus on our list for floor joints. We also cover Dundee, around 25 miles from Ferryden.
Anyone looking for floor joint sealing in DD10 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Among the streets we cover are Usan Road, Mill Lane and Croft Road, and sites on any of them can send details for a fixed quote. Sites close to Ferryden are covered too, including Montrose (1 mile north), Kirkton of Craig (1 mile south-west), Hillside (3 miles north), Craigo (5 miles north) and St Cyrus (5 miles north). Bigger towns within reach include Arbroath (11 miles south-west), Brechin (8 miles west), Letham (13 miles south-west), Edzell (10 miles north-west) and Friockheim (9 miles south-west).
Near you in Ferryden
We work on buildings around The Quarter Deck pub. The nearest railway station is Montrose station, roughly 0.9 miles north. A little further out are Montrose Castle (0.6 miles north-west) and Montrose Museum (0.6 miles north). For a walk, there’s Montrose Basin.
Site staff or a sealant specialist?
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Also near Ferryden
More services for Ferryden
Why it’s worth doing now in Ferryden
Tape, or whatever sealant is in the stores cupboard, may look like a fix for a while. Neither is made to carry wheels, and it typically ends up dragged across the floor. A product chosen for the traffic and movement does the job once. Exposed buildings in Scotland take a lot of weather, and for a smaller place like Ferryden, a repair visit takes planning, so it’s better to act early.
Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote and we will put a fixed figure on it.
Why clients in Ferryden choose us
- Work carried out by CSCS-carded applicators
- Products installed to the manufacturer’s instructions
- Fully insured
- Fixed quotes based on photographs, drawings or a visit
Take a look at how commercial sealant jobs are priced and our accreditations and insurance.
Maintenance after handover
Regular inspection catches problems early. Specifically:
- Record damaged joints with a photo and a location
- Ask drivers not to drag forks or pallets
- Walk the main routes and inspect joint lines on a regular cycle
- Allow for topping up joints as a new slab settles
Walk the main truck routes every few months and look along the joint lines. Look for separation down one side, new chips in the arris and debris gathering, and photograph anything that changes.
Every day an open joint stays full of grit, the edges take more punishment. Getting it filled stops the damage while it is still a straightforward job.