Industrial and floor joint sealing in Craigo, Angus
Sealant work in Craigo for main contractors, managing agents and facilities managers: floor joint sealing and filling in warehouses, factories and industrial units, with a fixed quote first.
- Filler that has parted from one face
- Flexible sealant torn out by wheels
- Scruffy, dirty joint lines on a shop or showroom floor
Floor joint sealing for businesses in Craigo
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How we handle floor joint sealing in Craigo
Floor joint sealing for us covers warehouse aisles, loading bays, production halls, retail floors and showroom slabs. Pricing depends on the length of joint, how worn the edges are and when we can get in and the figure is fixed before work begins. We work on forklift and pallet-truck routes, retail and showroom floors and saw-cut induced joints, and the usual reasons a site gets in touch are unfilled floor joints collecting dirt and grit and grimy joint lines spoiling a showroom floor. Whoever orders the work in Craigo, the brief is normally the same: a clear scope, tidy work and joints that don’t fail again.
In smaller places such as Craigo, the joints we’re asked about sit in workshops, farm sheds, schools and halls. Slabs and yards take vehicles, rain and frost.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Where
- Craigo (DD10)
- Region
- Angus
- Cover
- 12 months on every job
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
General trades versus a specialist
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and we’ll confirm the paperwork you need with the quote.
Places near Craigo
What else we do in Craigo
Different surfaces, different methods
Semi-rigid joint fillers
For trafficked warehouse joints, semi-rigid fillers are common. We place them to depth and trim them level with the slab.
Retail and showroom floors
In retail, joints take trolleys, castors and cleaning machines rather than forklifts. We pick a filler or sealant to suit and the finish matters as much as the performance.
When to call us in Craigo
Unfilled joints soon pack with grit, shrink-wrap scraps and pallet splinters. Packed debris acts like a wedge every time a wheel crosses so the arrises break sooner.
Look out for the following:
- Old filler gone hard, cracked or loose
- Grimy joint lines spoiling a showroom floor
- Dock area joints that have failed first
- Filler that has parted from one face
For floors and slabs around Craigo, the product is chosen for the traffic and the movement at each joint.
What to look for in a quote
- Their approach to joint depth and backing
- Will RAMS and insurance details be available?
- What the guarantee covers, and for how long
- Who will actually carry out the work
Floor joint sealing around Craigo: points for this area
Craigo is on Scotland’s drier eastern side. Cold winters and gritting are hard on any yard or deck joint left open. Resealing before the cold months helps protect the edges.
Hospital campuses such as Stracathro Hospital (to the west of Craigo) grow in stages, leaving movement joints wherever new blocks meet old.
Craigo is about 4 miles north-west of Montrose, in Angus. Businesses, contractors and managing agents in Craigo can call on us for floor joints. Craigo is one of 65 places we cover in Angus for floor joints. Sites around Dundee have their own page, about 27 miles away.
Postcode districts covered here: DD10 for floor joints. Sites close to Craigo are covered too, including Marykirk (1 mile north), Hillside (2 miles south-east), Luthermuir (3 miles north-west), St Cyrus (4 miles east) and Sauchieburn (4 miles north-west). Bigger towns within reach include Arbroath (15 miles south), Brechin (6 miles south-west), Letham (14 miles south-west), Edzell (6 miles north-west), Ferryden (5 miles south) and Friockheim (11 miles south-west).
Near you in Craigo
Craigo’s nearest station is Montrose station, roughly 4.2 miles south of the centre. Other landmarks nearby include Stracathro Hospital (4 miles west) and Inglismaldie Castle (3.2 miles north-west). Not far away are Duns Dish and St Cyrus National Nature Reserve.
Looking after the joints
For the best life from the joints:
- Stop forks and pallets being dragged across joints
- Start with the dock areas, where joints fail soonest
- Record damaged joints with a photo and a location
- Mention any aggressive cleaning regime at quote stage
Problems inside the 12-month guarantee period are ours to put right. After that, a check before your busiest period keeps small repairs small.
A broken joint on a main route is crossed by every truck on that route. Early treatment protects wheels, loads and drivers as much as the floor.
Our process
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. On site, the work typically takes a day for smaller units, with bigger warehouse floors programmed over several visits, and our waste is bagged and taken away as we go. Where we can, we combine work around Craigo with other jobs nearby. Tell us how flexible your dates are.
- Each area is assessed for joint width, arris damage and the wheels that cross it.
- The quote fixes the price, names the filler or sealant and shows how the floor will be zoned.
- Old filler, debris and contamination are cut or routed out back to clean concrete.
- We vacuum each run and prime it if the chosen product requires a primer.
- The chosen product is placed to its specified depth and trimmed level with the floor.
- Each phase reopens when the product is ready for wheels, then we start the next.
Preparing the site
- Let us know about inductions and permits
- Move anything stored against the joints
- Arrange parking or a loading space
Get a fixed quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to ring 01277 525 020 or email us with what you know.
Related advice
How the quote is worked out
These are the things that shape the price:
- Location, for remote and island sites
- Specialist products, such as fire-rated or hygienic sealants
- Quantities, in metres or numbers
- Whether old sealant has to be cut out first
We don’t publish prices, since every building and every scope is different. For a fixed figure, call for a quote and we’ll price your job on its own details.
Before you send an enquiry
A good diagnosis starts with the right details. Tell us:
- Photos of the joints, close up and from further back
- The postcode of the building
- The type of building and who uses it
- Your programme or deadline
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Share whatever details you have and we’ll fill any gaps with a visit.
Craigo: questions and answers
Is a hospital such as Stracathro Hospital somewhere you can work?
Yes, provided the work is planned with the site’s estates team. Work is phased so departments keep running, under the site’s own rules.
Will our site in Craigo have to close for joint sealing?
Rarely. Work is phased around your operations. We agree the sequence and timings with you before we start.
Can weather delay the job?
For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so damp, frosty or very cold days can stop external work. Internal work is rarely affected.
How long before trucks can use the joints?
Each product has its own cure time and cooler floors take longer. We plan the phasing so that waiting time fits your operation.
Are you CHAS accredited and on Constructionline?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
Can you phase floor joint work around operations?
The work is phased. We work aisle by aisle or zone by zone so the rest of the floor stays in use around the site hours and access windows you give us.
Can you work to our specification?
Yes. Include it with the drawings when you ask for a quote, and we will price the work to it, flagging anything that needs clarifying.