Fire Stopping in Ferryden
Commercial sealant work in Ferryden for contractors, FMs and building owners: fire-rated and intumescent sealing of service penetrations and linear gaps, quoted at a fixed price.
- Openings left by services added after handover
- Fire-rated sealant that has cracked or shrunk back
- Seals that don’t match their tested detail
Fire stopping near Ferryden
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Diagnose, treat, sign off
Tell us your site hours and access windows and we’ll plan around them. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. For work around Ferryden, we aim for one trip, so photographs, sizes and a full list matter. External joints need a dry spell as well.
- First we go through the drawings, schedule or specification for the seals.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Unsuitable fillers and loose debris are taken out of each opening.
- We fit the backing the detail asks for, to the stated depth.
- We apply the specified sealant to the depth and around the services as the detail shows.
- If an opening needs something other than sealant, we tell you instead of improvising.
Getting the site ready
- Agree which areas must stay open
- Let building users know which areas are affected
- Point out parking and an unloading spot
Quotes
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, speak to us on 01277 525 020 or send photos by email.
Read more
About our fire stopping in Ferryden
The test standards are BS EN 1366-3 for penetration seals and BS EN 1366-4 for linear joints. A rating such as EI 60 only holds when the product is installed as it was tested. So our job is to reproduce that arrangement faithfully. We work on service gaps in risers, linear gaps at wall heads and joints between fire-resisting walls and floors, and the usual reasons a site gets in touch are non-fire-rated filler around services and fire-stopping items raised at inspection or handover. A single leaking joint is often how a building in Ferryden first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Travel to smaller places like Ferryden is planned so every penetration is sealed on one trip. Send the specification and photos of the openings, with sizes if you have them.
What our 12-month guarantee covers is the way we did the job: preparation, application and finish. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Where
- Ferryden (DD10)
- Wider area
- Angus
- Cover
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Compartment walls and floors in Ferryden
A 2-mile radius around Ferryden takes in several hotels. A hotel refit often runs new services through compartment walls between bedrooms and corridors, and each opening needs the specified seal. Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, with proprietary products, intumescent ones included, tested for their end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
In a school such as Montrose Academy, fire-rated sealant goes in around service penetrations where it is specified. In a hotel such as George Hotel, 0.6 miles to the north of Ferryden, new pipework or cabling through bedroom and corridor walls needs sealing with the specified product.
Ferryden is about 1 mile south of Montrose, in Angus. Our applicators travel to Ferryden for work on service penetrations. We work across 65 places in Angus, large and small. Our Dundee page has more on work in that area (25 miles or so).
Work on service penetrations is covered throughout DD10, for business premises of every kind. Streets here include Usan Road, Mill Lane and Croft Road, and sites on any of them can send details for a fixed quote. We also cover Montrose (1 mile north), Kirkton of Craig (1 mile south-west), Hillside (3 miles north), Craigo (5 miles north) and St Cyrus (5 miles north) for service penetrations. Bigger towns within reach include Arbroath (11 miles south-west), Brechin (8 miles west), Letham (13 miles south-west), Edzell (10 miles north-west) and Friockheim (9 miles south-west).
What’s near Ferryden
In Ferryden, that means premises near The Quarter Deck pub and the streets around them. The closest station to Ferryden is Montrose station, about 0.9 miles north of the centre. Well-known places in the area include Montrose Castle (0.6 miles north-west) and Montrose Museum (0.6 miles north). For a walk, there’s Montrose Basin.
Looking after the joints
For the best life from the joints:
- Keep general-purpose fillers away from compartment walls
- Flag new cables with no seal around them
- Brief every trade that openings they make must be sealed
- Keep product data and details in the fire safety file
Add risers, plant rooms and ceiling voids to routine fire-stopping checks. Look for cracks, unsealed new cables and gaps that have been enlarged and get them dealt with.
Write fire stopping into the scope of any work crossing a compartment wall or floor. Then the seal goes in while the area is open, not months later.
Work for main contractors and building owners
If you look after buildings for someone else, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Sites in Ferryden can sit alongside others in a wider programme.
Why deal with it now?
An unsealed opening affects more than fire safety: they also carry noise, draughts and smells between rooms. Sealing them to the specified detail deals with the fire risk first. In Scotland, wind-driven rain finds a failed joint quickly, so it’s worth renewing joints around Ferryden before they leak.
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
What you get with us
- CHAS accredited contractor
- Fixed quotes based on photographs, drawings or a visit
- Fully insured, including public liability cover
- Sealing commercial buildings since 2005
Read what affects the cost and our accreditations.
Places near Ferryden
What else we do in Ferryden
What we’re called out for in Ferryden
Physical damage is another reason seals stop doing their job. Maintenance work can knock a seal, cut it back for an extra cable or remove it with an old pipe and the opening isn’t always resealed.
Most enquiries start with something like this:
- Builders’ foam or ordinary silicone in compartment walls
- Improvised or mixed-product fire seals
- Fire-stopping items raised at inspection or handover
- Unsealed openings around new pipes and cables
Older community buildings such as Inchbrayock U.F. Church that have been rewired or given new heating can have service gaps through walls worth checking against the specification.
What to look for in a quote
- How the existing material will be dealt with
- Will RAMS and insurance details be available?
- Are they CHAS accredited or on Constructionline?
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
How the job changes by surface
Linear joints
Linear joints run along the head of a wall, at a slab edge or between two fire-resisting elements. Their tested detail, under BS EN 1366-4, sets the width, depth, backing and movement allowed.
Small ducts
We seal around ducts only within what the tested detail covers. Dampers and ductwork systems themselves are outside our work.
Questions we’re asked in Ferryden
Do you work on fire-rated sealing in hotels in Ferryden?
Yes. We install fire-rated and intumescent sealant where it is specified. Each seal follows the tested detail, and rooms are done in turn.
How do the Scottish rules apply to fire-rated sealing in Ferryden?
Under Scotland’s non-domestic Technical Handbook (clause 2.1.14), service penetrations should keep at least the wall or floor’s fire resistance duration, using products tested for their end use. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
Do you take on multi-site work?
Yes. A group of buildings can go on one quote, with one point of contact.
How do I request a quote?
There are four steps: send details, get a quote, we seal, guaranteed. The first step only needs photos and a postcode.
Do your applicators hold CSCS cards?
Yes. We use CSCS-carded applicators.
Are you fully insured?
Yes. We’re fully insured, and the certificate can go with your quote.
Is the work guaranteed?
Yes. Workmanship is guaranteed for 12 months.