The Mastic Doctor team standing beside their branded vans outside an office building
Angus · Scotland

Industrial and floor joint sealing in Inverkeilor, Angus

Looking for floor joint sealing in Inverkeilor? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.

  • Old filler gone hard, cracked or loose
  • Broken arrises where pallet trucks cross
  • Saw-cut joints left open and packed with grit
1
Send details
Drawings, photos, a joint schedule or a site visit.
2
Get a quote
A fixed price, with what’s included set out clearly.
3
We seal
Failed joints cut out, faces prepared, new sealant laid.
4
Guaranteed
Our workmanship is guaranteed for 12 months.
London, the South East & Scotland
CHAS accredited
£5m PL insurance

Floor joint sealing for Inverkeilor sites

Photos, a specification or a quick description of the joints is enough to start a fixed quote.

Floor joint sealing in Inverkeilor, done properly

For sites in Inverkeilor and across Angus, the process is short: send details, get a fixed quote, we seal, and the work is guaranteed. Approximate joint lengths, a few photographs and a floor plan are enough for a quick quote and a visit can be arranged where that is easier. If you’re dealing with drivers complaining about joints on a route and saw-cut joints left open and packed with grit, we can help, whatever the surface. One point of contact handles commercial sealant work in Inverkeilor from the first photos to the final walk-round, whether it’s one building or several.

For floor or movement joints around smaller places like Inverkeilor, we plan to finish in one visit where we can. Photos, approximate widths and what uses the floor help us bring the right materials.

We sign every job off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.

The Mastic Doctor team beside their liveried vans in front of an office building
Place
Inverkeilor (DD11)
Region
Angus
Cover
A 12-month guarantee
Quote
Fixed quote, scope in writing
Phone
01277 525 020
Page updated
3 November 2026

General trades versus a specialist

Redoing a failed joint typically costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.

There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and we will confirm the paperwork you need with the quote.

Why deal with it now?

Waiting for a site-wide shutdown often means the joints keep getting worse. Phased in zones, the busiest routes can be treated first while the rest of the floor carries on. Around smaller places like Inverkeilor, halls, stores and seasonal buildings may not be checked often, so a failed joint has time to cause damage. Early resealing prevents it.

What a job costs comes down to how many linear metres there are, how much old material needs removing and how the joints are reached. Call for a fixed quote when you’re ready.

What you get with us

  • Fully insured
  • A fixed quote before work starts
  • Commercial sealant work since 2005
  • 12 months’ guarantee on every job

Take a look at how commercial sealant jobs are priced or our accreditations.

Common questions from Inverkeilor clients

Is Inverkeilor off your patch?

Not at all: smaller places are covered as well as towns. Every Scottish council area is within our area. Where we can, we group nearby jobs to make the most of each trip.

Do you take on work at healthcare sites like Arbroath Infirmary?

Yes, healthcare and care buildings are part of our work. Each area is agreed with the ward or department and the estates team in advance.

Can you phase floor joint work around operations?

In most cases, just the area being treated is coned off. Traffic returns to each zone once it has cured, then we move to the next.

Do your applicators hold CSCS cards?

Yes. Our applicators hold CSCS cards.

Is it normal for joint filler to separate?

It can be shrinkage, contamination on the joint faces or a product unsuited to the movement. We look at which it is before recommending anything.

How do you deal with asbestos in old sealant?

Asbestos is possible in some older mastics, particularly in buildings from before 2000. We check the asbestos register before cutting out old sealant in an older building, and work stops until any suspect material has been tested. We don’t remove asbestos-containing materials.

When can forklifts run over new joint filler?

The wait is set by the product’s cure time, and cold floors slow it down. We plan the phasing so that waiting time fits your operation.

Keeping the joints sound

After handover, these steps help:

  • Keep grit out of unfilled joints in the meantime
  • Tell us about strong cleaning chemicals before we quote
  • Make joint checks part of your floor inspections
  • Start with the dock areas, where joints fail soonest

Normal floor cleaning is fine once the product has cured. Tell us about aggressive cleaning products or hot washing at quote stage so the product suits them.

Edges tend to break slowly at first, then quickly. Once the first piece is out, wheels drop further and hit harder so early treatment saves a lot of trouble.

Warehouse floors and decks around Inverkeilor

Inverkeilor is within about 3 miles of the coast. Open joints in coastal car parks and yards let in salt-laden water as well as grit, so it pays to keep them sealed. Inverkeilor is on Scotland’s drier eastern side. Freezing weather and salt still attack open external joints. Sealing them in drier months limits winter damage.

Sites like Arbroath Infirmary (to the south of Inverkeilor) carry ambulances, deliveries and visitors’ cars over their road and deck joints. For floors and slabs around Inverkeilor, the product is chosen for the traffic and the movement at each joint.

Inverkeilor is about 5 miles north of Arbroath, in Angus. We send applicators to Inverkeilor for floor joints. Inverkeilor is one of 65 places in Angus on our list. Our Dundee page has more on work in that area, about 20 miles away.

Anyone looking for floor joint sealing in DD11 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. Among the streets we cover are Station Road, Main Road and Myreside Drive. Nearby places we also cover include Auchmithie (3 miles south), St Vigeans (4 miles south), Friockheim (4 miles west), Colliston (5 miles south-west) and Kirkton of Craig (5 miles north-east) for floor joints. Nearby towns on our patch include Forfar (13 miles west), Montrose (6 miles north-east), Monifieth (15 miles south-west), Carnoustie (11 miles south-west), Brechin (8 miles north-west) and Hunter's Town (12 miles south-west).

What’s near Inverkeilor

Other landmarks nearby include Arbroath Infirmary (5.8 miles south) and Red Castle (1.8 miles north-east).

Map of Inverkeilor © OpenStreetMap contributors

Work for main contractors and building owners

When you manage a building on behalf of an owner, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.

FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.

Diagnose, treat, sign off

We begin with a short walk round with whoever looks after the building, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Tell us who will meet us and how to get in at your building near Inverkeilor. That goes into the plan alongside the quote.

  1. First comes a walk of the floor to record joint sizes, broken edges and traffic routes.
  2. The quote fixes the price, names the filler or sealant and shows how the floor will be zoned.
  3. We remove failed material and packed debris until sound concrete is exposed on both faces.
  4. Dust is sucked out of the joint and a primer used if the product data sheet asks for one.
  5. Filler or sealant goes in to the right depth and is finished flush with the slab.
  6. Each phase reopens when the product is ready for wheels, then we start the next.

What we need from you

  • Tell us what induction or permit system the site runs
  • Make sure the joints can be reached
  • Send your site hours and access windows

Ask for a quote

Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photographs and a few notes.

Get a price

Advice

When something else is needed

We check first that sealant really is the fix. It won’t put right:

  • A floor that is out of level for the racking or trucks
  • Slab panels that rock or move under load
  • Damaged or worn floor coatings and screeds

Not sure which it is? You can call the office on 01277 525 020 or send details through our quote form and we will tell you honestly.

What we seal

  • Loading bays
  • Saw-cut induced joints
  • Joints along racking aisles
  • Retail and showroom floors
  • Construction joints
  • Forklift and pallet-truck routes
Accreditations

Trusted. Accredited. Insured.