Industrial and floor joint sealing in Colinton Mains, Edinburgh
Floor joint sealing and filling in warehouses, factories and industrial units across Colinton Mains, by CSCS-carded applicators. CHAS accredited and fully insured.
- Flexible sealant torn out by wheels
- Old filler gone hard, cracked or loose
- A gap opening alongside old joint filler
Need floor joint sealing in Colinton Mains?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
About our floor joint sealing in Colinton Mains
Few warehouses can shut a whole floor while joints are done, so we phase the work aisle by aisle or bay by bay. Tell us your site hours and access windows and we will plan around them so the rest of the operation keeps going. If you have flexible sealant torn out by wheels and loading bay joints breaking down, we can put it right, whatever the surface. Most enquiries from Colinton Mains start with one failed joint and grow into a wider look at the building: we look at the rest while we are there and tell you what we find.
Scotland’s cities have multi-storey car parks, shopping centres, university and hospital estates, all with movement joints in decks, floors and walls. Failed joints let water in, and repeated frost then works on the edges.
Every job we finish is backed by a 12-month workmanship guarantee. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Where
- Colinton Mains (EH13, EH10, EH14)
- Region
- Edinburgh
- Guarantee
- 12 months on every job
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Aftercare for building managers
Your facilities or cleaning team can help the joints last. Share these points with them:
- Ask drivers not to drag forks or pallets
- Keep grit out of unfilled joints in the meantime
- Start with the dock areas, where joints fail soonest
- Photograph any joint that starts to chip
If a joint we filled starts to break up within 12 months, tell us and we will arrange a look. Beyond that, an inspection once or twice a year catches failing joints early.
Grit in an open joint does damage every time a wheel crosses it. Getting it filled stops the damage before it becomes a repair.
Why it’s worth doing now in Colinton Mains
Every jolt over a broken joint passes into the truck, the load and the driver. Wheels and bearings wear faster and loads can shift, which nobody budgets for. A properly filled joint smooths the route. Failed sealant in a shared building in Colinton Mains can affect more than one owner, which makes early repair simpler for everyone. Acting early avoids disputes and bigger repairs.
A quote for floor joints depends on quantities, condition and access. Call for a quote.
Why choose Mastic Doctor in Colinton Mains
- Constructionline member for supplier checks
- Public liability insurance in place
- Work to your specification and the manufacturer’s guidance
- Health and safety: CHAS accredited
Take a look at what affects the cost and our accreditations and insurance.
Traffic, movement and joints around Colinton Mains
Colinton Mains is on Scotland’s drier eastern side. Frost and de-icing salt still find their way into open external joints. Sealing them in drier months limits winter damage. At least three named trading, business or retail sites lie within about 3 miles of Colinton Mains. Sites like these are full of saw-cut floor joints, yard slabs and car park joints.
For a school such as Firrhill High School, playground and building joints can be done in the holidays. Campuses like Edinburgh Napier University, 1.4 miles to the north-west of Colinton Mains, mix old and new buildings, with movement joints wherever they meet. For an estate such as Royal Edinburgh Hospital, which lies north of Colinton Mains, the joints in ramps, decks and long building elevations all need attention over time.
Colinton Mains is about 3 miles south of Edinburgh, in Edinburgh. We cover commercial sites throughout Colinton Mains, whether it’s a single job or part of a planned programme. We work across 174 places in Edinburgh.
Anyone looking for floor joint sealing in EH13, EH10 and EH14 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. If your site is on Redford Road, Greenbank Road and Oxgangs Avenue or close by, send details and we will quote for floor joints. Just outside Colinton Mains, we also work in Firrhill (1 mile north-west), Oxgangs (1 mile east), Redford (1 mile west), Greenbank (1 mile north-east) and Comiston (1 mile east). A short drive away, we cover Edinburgh (3 miles north), Leith (5 miles north-east), Bonnington (5 miles north-east), Greenside (4 miles north-east), Broughton (4 miles north-east) and Bellevue (4 miles north).
Around Colinton Mains
Around Colinton Mains, our work takes us to commercial buildings near Army School of Bagpipe Music and Highland Drumming and Harrison Park. The nearest railway station is Slateford station, about 1.3 miles north-west. A little further out are Edinburgh City Hospital (0.5 miles north) and Cameron Toll Shopping Centre (2.8 miles north-east). The countryside around Colinton Mains includes Duddingston Loch and Craiglockhart Hill.
Doing it in-house
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong normally costs more in the end than doing them right.
Colinton Mains: questions and answers
Will you take on work at estates like Edinburgh West Retail Park, close to Colinton Mains?
Yes. Estates, retail parks and business parks around Colinton Mains, Edinburgh West Retail Park among them, are all within reach. To start, just ring 01277 525 020 or email a schedule or drawings with the unit, the joints involved and your access times.
Would you work within a site like Royal Edinburgh Hospital?
Yes, provided the work is planned with the site’s estates team. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Are you CHAS accredited?
Yes. We are CHAS accredited, we’re a Constructionline member and we use CSCS-carded applicators.
What about RAMS and site documents?
Requirements differ from site to site, so tell us what you need and we’ll confirm it when we quote.
Do you cover Colinton Mains?
Yes. We cover Colinton Mains and the rest of Edinburgh. To discuss a job, phone 01277 525 020 or email us.
How long before trucks can use the joints?
Cure times vary with the product and the conditions. We will give you a time for each zone when we agree the phasing.
Why has the filler pulled away from one side?
Separation normally comes from slab shrinkage, poor preparation or the wrong product. We diagnose the cause before suggesting a fix.
For managing agents and facilities managers
Blocks and communal areas make up much of the work for housing associations and agents. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
How a job runs
We follow your site rules from the start: signing in, inductions and any permit to work. Once we’re cleared to begin, the joints are worked through in the order agreed with your site contact. City jobs in Colinton Mains usually need parking and loading planned. Tenement closes, shared stairs and factor approvals may also be involved.
- We agree the traffic routes and phasing with your site team.
- Any joints with broken edges are flagged before work starts.
- Failed material and debris are removed and the joint cleaned.
- The chosen filler or sealant goes in flush with the slab.
- You get a time for each zone to reopen.
What we need from you
- Point out parking and an unloading spot
- For older buildings, check the asbestos register before work
- Have the specification and drawings to hand
Get a fixed quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to speak to us on 01277 525 020 or email drawings and photos with what you know.
Advice
How the quote is worked out
The price varies from site to site. Expect it to depend on:
- The total length or number of joints
- The size and state of each joint
- Access and working height
- How much existing material needs removing
Cost follows what’s involved: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a quote.
Before you send an enquiry
Diagnosis starts before we arrive. Tell us:
- Specification clauses that apply
- Access details, including height
- Where the site is, with the postcode
- Clear photos of the problem areas
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Share whatever details you have and we’ll fill any gaps with a visit.