Industrial and floor joint sealing in Braehoulland, Shetland Islands
Work needed on a floor joint in Braehoulland? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Loading bay joints breaking down
- Flexible sealant torn out by wheels
- Cracked and crumbling joint fill
Need floor joint sealing in Braehoulland?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
About our floor joint sealing in Braehoulland
Concrete floors in warehouses and factories are cut into bays with saw cuts and day joints, and each joint line is a weak edge that wheels run over all day. Our job is to put the right filler or sealant into them for the loads and the movement they see so the edges are held up and debris can’t pack in. We work on retail and showroom floors, saw-cut induced joints and joints along racking aisles, and the usual reasons a site gets in touch are soft sealant dragged out of trafficked joints and broken arrises where pallet trucks cross. Whoever orders the work in Braehoulland, the brief is typically the same: a clear scope, tidy work and joints that don’t fail again.
Travel to smaller places like Braehoulland is planned so the work is done in one trip where possible. Send photos, joint widths and details of the traffic first.
We sign every job off with a 12-month guarantee. The promise is simple: if our work fails within that year, we put it right.
- Place
- Braehoulland (ZE2)
- Region
- Shetland Islands
- Guarantee
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
After the work
Your facilities or cleaning team can help the joints last. Pass these on to them:
- Allow for topping up joints as a new slab settles
- Ask drivers not to drag forks or pallets
- Treat loading bay joints first if they’re failing
- Tell us about strong cleaning chemicals before we quote
On younger slabs, a fine line can open down one side of a filled joint as the concrete keeps shrinking. That is common and is normally dealt with by topping up once the slab has settled down in most cases.
Regular inspection catches failing fills before the edges go. We can quote a programme that starts with the busiest areas and keeps on top of the rest.
Where floor joints take the most wear near Braehoulland
The sea is no more than about 1 mile from Braehoulland. Coastal yards and decks give their joints salt and wet weather to deal with, not just wheels, so a failed joint lets more in and the edges break up sooner. Being in the east of Scotland, Braehoulland gets less rain than the west coast. Cold winters and gritting are hard on any yard or deck joint left open. Autumn is a sensible time to seal them.
Once a joint near Braehoulland opens up, grit and water get in and the edges start to break; we’ll tell you if the edges need repairing first. Around Braehoulland, each joint gets a filler or sealant matched to what crosses it and how much it moves.
Braehoulland is about 28 miles north-west of Lerwick, in the Shetland Islands. If you are looking for floor joint sealing in Braehoulland, we can help. 63 places across the Shetland Islands fall within our area, Braehoulland among them.
Business premises anywhere in ZE2 are within our area. Just outside Braehoulland, we also work in Hillswick (3 miles south-east), Urafirth (4 miles east), Hogaland (7 miles east), Ollaberry (8 miles east) and Sullom (8 miles south-east). Where a site is remote or on an island, travel and materials need planning ahead, so the full address helps from the start.
What’s near Braehoulland
Nearby you will also find Tangwick Haa Museum (1.2 miles south-west). Open spaces near Braehoulland include Loch of Braehoulland.
Why deal with it now?
Not every joint needs stripping out completely. Where existing filler is well bonded and the gap beside it is small, a full strip-out isn’t always needed, and we’ll say which joints need what. Renewing every failing joint on one visit is the sensible approach for a place like Braehoulland. Send photos and we will quote for everything together.
The product called for affects the cost, and so does the preparation. Access, phasing and site requirements come into it too.
Why us?
- A fixed quote before work starts
- Workmanship guaranteed for 12 months
- One contact handling all your sites
- A Constructionline member, so easy to vet
See our cost guide or our accreditations.
Questions about Braehoulland
Will you travel to Braehoulland on the island?
Yes, Braehoulland is within the area we cover. We work across every Scottish council area. We plan island jobs around the ferry and the forecast, and bring everything the job needs on the first crossing.
Does the sea air around Braehoulland change the choice of sealant?
It can, yes: buildings near the sea take more wind-driven rain, and salt in the air nearer the shore. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.
How do we get a quote for floor joints?
Use our quote form, or email photos and a plan and tell us what runs on the floor. A fixed quote follows that shows the products and zones.
What guarantee do you give on joint filling?
Every job has our 12-month guarantee. It covers our workmanship, not later slab movement or damage from impacts.
Can the sealant be colour-matched?
In many cases, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We confirm what’s available for the specified product when we quote.
Do your applicators hold CSCS cards?
Yes. If you need card details for site access, tell us and we’ll confirm them with the quote.
Does weather matter for sealant work?
It can, when the joints are outside. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Internal work is far less affected.
When something else is needed
Honesty saves time and money. Fresh joints won’t solve:
- Cracks across panels caused by settlement or overload
- A floor that is out of level for the racking or trucks
- Damaged or worn floor coatings and screeds
If in doubt, phone 01277 525 020 or send details through our quote form and we will say what we think.
Joints and surfaces we work on
- Forklift and pallet-truck routes
- Saw-cut induced joints
- Loading bays
- Retail and showroom floors
- Joints along racking aisles
- Construction joints
On site: what to expect
When we get to site, we report to your site contact and complete whatever induction the building runs. Everything around the joints gets protected before any cutting starts, with the work itself typically taking a day for smaller units, with bigger warehouse floors programmed over several visits. For a building near Braehoulland, directions, keys and a contact on the day are worth sorting early. We will confirm the plan with the fixed quote.
- We walk the floor and mark up joint widths, edge damage and traffic routes.
- You receive a fixed quote showing products and phasing.
- Each joint is cut or routed back to clean, sound concrete.
- Dust is vacuumed out and primer applied where specified.
- The joint is filled to its specified depth and trimmed level.
- Zones reopen once cured and the work moves on.
What we need from you
- Make sure the joints can be reached
- Warn occupants and staff about the work
- Point out any areas we must not close
Request a quote
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we will arrange a site visit if anything is unclear.
Related advice
How the job changes by surface
Flexible floor sealants
Where joints move more, a flexible polyurethane floor sealant is often used. They give less edge support than semi-rigid fillers so they are used where movement matters more than wheel load.
Forklift and pallet-truck routes
A route joint has to take repeated wheel strikes without breaking up. Wheel type and traffic level steer the product choice.
When to bring in a specialist
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Certain joints really need a specialist: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong typically costs more in the end than doing them right.