Facade Sealing contractors in Braehoulland
Facade sealing for Braehoulland, from a contractor working since 2005. Fully insured and CHAS accredited.
- Previous reseals run over old sealant
- Gaps between rainscreen or cladding panels
- Leaks at window and door perimeters
Facade sealing across Braehoulland
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Sites and facades in and around Braehoulland
Braehoulland lies within about 1 mile of the sea. On a coastal site, facade and perimeter joints face driven rain and, closer to the beach, salt, so joint design, primers and product choice deserve extra care. Scotland has its own building regulations, and in Braehoulland warrants come from the local authority verifier. The mastic package follows the approved specification.
Around Braehoulland, as anywhere, a facade joint depends on its sizing, backing rod and preparation. For contractors building in or near Braehoulland, we seal to the drawings, the specification and the programme.
Braehoulland is about 28 miles north-west of Lerwick, in the Shetland Islands. Anywhere in ZE2, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Braehoulland is one of 63 places in the Shetland Islands on our list.
We take on facade joints across the ZE2 postcode area. Nearby places we also cover include Hillswick (3 miles south-east), Urafirth (4 miles east), Hogaland (7 miles east), Ollaberry (8 miles east) and Sullom (8 miles south-east) for facade joints. Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so mention the location when you phone 01277 525 020 or send photos by email.
Local landmarks in Braehoulland
A little further out are Tangwick Haa Museum (1.2 miles south-west). Not far away are Loch of Braehoulland.
Facade sealing for commercial buildings in Braehoulland
External sealing depends on the weather more than most trades. The sealant needs a dry joint and temperatures inside the maker’s limits, and cold, damp starts can delay work. We plan for that and keep you updated. We work on coping and flashing joints, window and door perimeters and cladding panel joints, and the failures we are asked to look at most are perimeter joints where frames meet the structure and perimeter sealant that has split or peeled away. Most enquiries from Braehoulland start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Outside mastic in Scotland needs a dry, frost-clear joint, and in a place like Braehoulland that means watching the forecast. We build some give into the plan and agree it with the site manager.
Guaranteed is the last step of every job. You get a 12-month guarantee on our workmanship, and the quote explains what it covers.
- Place
- Braehoulland (ZE2)
- Wider area
- Shetland Islands
- Cover
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Call
- 01277 525 020
- Updated
- 3 November 2026
Work for main contractors and building owners
Main contractors use us as their sealant subcontractor on new-build and refurbishment projects. Programme, specification and site rules come first.
CHAS accredited and a Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
Questions we’re asked in Braehoulland
Will you fit the mastic around our build programme in Braehoulland?
Yes. Send the programme and drawings, and we’ll plan the mastic to suit the stages. Tell us which site documents you need, such as RAMS, our insurance certificate or CSCS details, and they’re confirmed with the quote.
Can you take on a job in Braehoulland, on the island?
Yes. Our area covers all of Scotland, cities, towns and islands alike, and that includes island locations such as Braehoulland. Island work is planned around ferry crossings and the weather, so photos and a full list before we travel are essential.
What type of sealant goes on window perimeters?
The product follows the joint’s movement, the surfaces and the specification. Specifications often refer to BS EN 15651-1 for facade sealants or BS EN 15651-2 for glazing and we follow the specified product.
Does the weather affect the work?
Outside, yes. The joint has to be dry and within the product’s temperature range, so frost, rain or cold mornings can delay outside work. Inside work is seldom held up.
What about RAMS and site documents?
Requirements differ from site to site, so tell us what you need and we will confirm it when we quote.
Can you fit around our working hours?
Give us your site hours and any access windows in your enquiry, and we will schedule the work to suit. Our office runs Monday to Friday, 8am until 5pm.
Do you work to architects’ specifications?
Yes. Include it with the drawings when you ask for a quote, and we will price the work to it, flagging anything that needs clarifying.
Also in Braehoulland
Diagnose, treat, sign off
Tell us your site hours and access windows and we’ll plan around them. While we’re working, the area stays contained and tidy, and we check in with your contact before moving on to each new area. For a building near Braehoulland, directions, keys and a contact on the day are worth sorting early. We will confirm the plan with the fixed quote.
- First we review photos, drawings or what we saw on a visit, and agree how each joint will be reached.
- The old bead is cut away completely, not overlaid.
- Joint faces are cleaned to firm, sound material, with primer where the sealant maker specifies it.
- Backing rod, or bond-breaker tape in shallow joints, limits the depth.
- The new sealant goes in and is tooled firmly onto both faces.
- We walk the finished joints with you before handing over.
Before we start on site
- Share your working hours and any access restrictions
- Share the asbestos register for older buildings
- Let building users know which areas are affected
Get a fixed quote
Let us know the site, the scope and your timescale, and a fixed quote will follow. The easiest way is to give us a call on 01277 525 020 or email us.
Read more
How the job changes by surface
Perimeter joints at frames and structure
The joint around a framed system, where it meets the structure, needs sealant. Our work is that perimeter joint.
Coping and flashing joints
Coping and flashing joints are included where sealant is the specified fix. These joints take full exposure to weather and need a durable external sealant.
Cost factors for facade joints
What shapes the price:
- Quantities, in metres or numbers
- How much existing material needs removing
- Travel to remote or island sites
- Backing rod, priming and other preparation
What a job costs comes down to how many linear metres there are, how much old material needs removing and the access. Call for a quote when you are ready.
Before you send an enquiry
It doesn’t need to be a full survey. These details are enough to start:
- When you need the work done
- A wide shot and a close-up of the area
- Access details, including height
- Rough lengths or quantities, or drawings if you have them
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Send what you have, and we’ll arrange a site visit if anything is unclear.
General trades versus a specialist
Some joints are best left to specialists: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and we’ll confirm the paperwork you need with the quote.
When it isn’t the sealant
Being straight saves everyone time. New sealant won’t cure:
- Specialist high-level access methods
- Installing or repairing glazing systems
- Damp caused by condensation inside the building
If in doubt, ring 01277 525 020 or email the details over and we’ll say what we think.
Where we work in Braehoulland
- Stone and brick facade joints
- Shopfront frames
- Coping and flashing joints
- Window and door perimeters
- Perimeter joints where frames meet the structure
- Cladding panel joints