Fire stopping in Yaverland
Need fire stopping in Yaverland? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Openings left by services added after handover
- Builders’ foam or ordinary silicone in compartment walls
- Seals that don’t match their tested detail
Fire stopping across Yaverland
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How a job runs
Tell us your site hours and access windows and we will plan around them. While we’re working, the area stays contained and tidy, and we check in with your contact before moving on to each new area. For work around Yaverland, we aim to finish in one visit, so photographs and measurements up front really help. Then the right materials arrive with us.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- We compare every service penetration with its tested detail before sealing.
- Unsuitable material is removed and the opening cleaned so the seal starts clean.
- The specified backing and sealant go in to depth and are finished neatly.
- Anything outside the detail is reported to you rather than sealed.
Before we start on site
- Point out parking and an unloading spot
- Flag any permit to work we’ll need
- Clear stock, furniture or equipment away from the joints
Request a quote
For a fixed quote, call the office on 01277 525 020 or email the details over. You can also send details through our quote form.
Read more
Fire stopping in Yaverland
A lot of fire-stopping work comes after M&E installation, a refit or a tenant fit-out. New cable runs, replaced pipework and extra data routes all punch holes in compartment walls, often unnoticed. Those on your schedule are closed with the specified product. The enquiries we see most involve seals disturbed by maintenance and left open and head-of-wall gaps with no fire seal, on service gaps in risers, linear gaps at wall heads and cable penetrations. A single leaking joint is often how a building in Yaverland first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Smaller places such as Yaverland still have buildings with fire-resisting walls and floors: schools, halls, care homes and commercial conversions. If sealant is what the specification names, we install it around the services exactly as the maker’s detail sets out.
We sign every job off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Location
- Yaverland (PO36)
- Region
- Isle of Wight
- Guarantee
- 12 months on our workmanship
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Service penetrations in Yaverland buildings
In England, Approved Document B covers fire stopping of openings and penetrations. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. Either way, we install the specified product to its tested detail. The area within 2 miles of Yaverland holds plenty of hotels. Hotels are divided into compartments, and refurbishments that add pipes and cables through bedroom and corridor walls leave gaps to close.
For a building at a site such as Spithead Business Centre, which lies south-west of Yaverland, a check of penetration seals after each fit-out is good practice. Schools such as The Bay Church of England School often have new data and services installed during holidays, and penetrations through fire-resisting walls should be checked afterwards.
Yaverland is about 4 miles south of Ryde, in the Isle of Wight. Across the PO36 postcode area, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Yaverland is one of 125 places we cover in the Isle of Wight for service penetrations. Our Portsmouth page has more on work in that area, about 10 miles away.
Work on service penetrations is covered throughout PO36, whatever the building. If your site is on Meadow Way, Yaverland Close and Yaverland Road or close by, we can quote for service penetrations. Close to Yaverland, our area also takes in Yarbridge (1 mile north-west), Morton (1 mile north-west), Brading (1 mile north), Sandown (1 mile south-west) and Adgestone (1 mile north-west). Bigger towns within reach include Newport (8 miles west), Ryde (4 miles north), Cowes (10 miles north-west), Shanklin (3 miles south-west), Ventnor (6 miles south-west) and East Cowes (9 miles north-west). For island and remote sites, travel and materials need planning ahead, so include the location in your enquiry.
Landmarks near Yaverland
Around Yaverland, our work takes us to commercial buildings near The Caulkheads pub and Sandown Bay Academy, among other places. For rail, the closest station is Brading station, roughly 1 mile north. Nearby you will also find Sandown Castle (0.7 miles south-west) and Arthur Webster Memorial Hospital for Children (2.8 miles south-west). For a walk, there’s Bembridge Down and Brading Marshes RSPB reserve.
Also in Yaverland
Keeping the joints sound
After handover, a little attention goes a long way:
- Settle who seals which penetrations at the start of a project
- Get seals inspected before ceilings and boxing close
- Leave fire sealant to cure fully before covering it
- Make fire stopping part of every scope that crosses a fire-resisting wall
After the work, brief anyone else working in the area that the openings are now sealed. If a seal has to be opened for a new service, it should be reinstated to the same detail, by someone who knows the system.
Write fire stopping into the scope of any work crossing a compartment wall or floor. Then the seal goes in while the area is open.
Why act early in Yaverland
Leave a penetration open and smoke and fire can cross into the next compartment far earlier than intended. Putting it right is usually a modest job when the openings are accessible. Left until ceilings are closed or a tenant moves in, the same work costs more access and more disruption. Around Yaverland, it’s better to renew all the failing joints at once, rather than one at a time. Photos of every joint help us quote for the whole job.
Pricing service penetrations depends on how many there are, their condition and the access. Call for a quote.
Why us?
- Commercial sealant work since 2005
- Clear, fixed quotes
- Constructionline member
- One number for every site we cover
Read what affects the cost or our accreditations and insurance.
Common problems we fix in Yaverland
On a busy project, programme pressure can mean fire stopping is rushed or left to whichever trade is closest. That is when untested combinations creep in, which then have to be put right.
Most enquiries start with something like this:
- Snag lists that include open service penetrations
- Non-fire-rated filler around services
- Damaged fire seals in risers and voids
- Old intumescent sealant that has split away
Hospital estates such as Arthur Webster Memorial Hospital for Children, 2.8 miles south-west of Yaverland, are divided into fire compartments, and any service penetration through them should be sealed to the specified, tested detail.
Questions to ask before you book
- What level of public liability insurance do they hold?
- Their approach to joint depth and backing
- Whether primer will be used where the manufacturer specifies it
- Whether old or failed sealant will be cut out, not overlaid
Questions about Yaverland
Is a hospital such as Arthur Webster Memorial Hospital for Children somewhere you can work?
Yes, healthcare and care buildings are part of our work. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Do you cover business parks and estates near Yaverland, such as Spithead Business Centre?
Yes, sites like Spithead Business Centre are within our area, along with the rest of Yaverland. A few photos and the unit address let us price the work.
Is BS 476 being phased out?
From 2 September 2029, Approved Document B in England drops its references to BS 476 classes, with transitional arrangements set by the Government. The European route, BS EN 13501-2, then applies. Product selection stays with your designer.
Can you seal any opening with fire-rated sealant?
No. It depends on the tested detail for that wall or floor and service. Large openings, many plastic pipes and some ducts need collars, wraps, batts or boards, and we’ll tell you when that applies.
What will the job cost?
It depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a fixed quote.
How long does a typical visit take?
That varies with the scale of the job, though a typical visit usually takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence. For bigger or phased jobs, we’ll set out a timescale with the quote.
Can you quote from photos?
That depends on the size and complexity of the job. Simple work can often be priced from photos, and bigger or more complex jobs typically get a visit.
Surface by surface
Drylining partitions
Drylined fire walls are tested in a particular build-up. The sealant detail has to be tested in that wall type, with the stated board layers before sealing.
Small ducts
We seal around ducts only within what the tested detail covers. Dampers and ductwork systems themselves are outside our work.
Honest limits
Being straight saves everyone time. New sealant won’t cure:
- Plastic pipes whose detail calls for a collar or wrap
- Reviewing a building’s overall fire safety
- Approving the work on behalf of building control
If in doubt, phone 01277 525 020 or email us and we’ll say what we think before you book.
Joints and surfaces we work on
- Service gaps in risers
- Joints between fire-resisting walls and floors
- Cable penetrations
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Pipe penetrations