Fire Stopping in Strachan
Fire-rated and intumescent sealing of service penetrations and linear gaps in Strachan. CHAS accredited and fully insured, with a 12-month guarantee.
- Unsealed joints where partitions meet the slab
- Unsealed openings around new pipes and cables
- Seals disturbed by maintenance and left open
Fire stopping for businesses in Strachan
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Your questions answered
Is Strachan off your patch?
No. Places such as Strachan are covered as much as the big towns. We work across every Scottish council area. We plan jobs in smaller places so return trips are kept to a minimum.
Can you take on a job at a hospital such as Glen O'Dee Hospital?
Yes, provided the work is planned with the site’s estates team. Each area is agreed with the ward or department and the estates team in advance.
Do you hold third-party fire-stopping installer certification?
No. We don’t hold a third-party fire-stopping installer certificate. We are CHAS accredited and a Constructionline member, and our applicators are CSCS-carded. Where a client or main contractor requires a scheme member, we’ll say so straight away rather than waste your time.
Can you handle several sites?
Yes. Multi-site work and planned programmes are a core part of the service, with each site phased to suit its occupants.
Do you approve fire stopping for building control?
No. Sign-off isn’t ours to give, and we don’t hold a third-party installer certificate. Our part is fitting the specified product to its tested detail.
Do you take on small jobs?
Whatever the size, the process is the same: send details, get a fixed quote, we seal, guaranteed.
Is your workmanship covered by a guarantee?
Yes. The 12-month guarantee covers our preparation and application, but not damage, misuse or other trades’ work.
Fire stopping in Strachan
On a fit-out or refurbishment, we follow the services contractors floor by floor. To price a package, call 01277 525 020 or email drawings and photos with the schedule or marked-up drawings alongside the manufacturer’s details. Tell us what records you need and we will confirm with the quote. If you have hidden openings found during inspections and unsealed openings around new pipes and cables, we can put it right, on linear gaps at wall heads, joints between fire-resisting walls and floors and small duct penetrations where the tested detail allows alike. Looking for mastic applicators who cover Strachan? We have been sealing commercial buildings since 2005, CHAS accredited and a Constructionline member.
For a building near Strachan, we plan fire-rated sealing so it’s finished in one visit where possible. Send the specification and photos of the openings, with sizes if you have them.
Every job we finish is backed by a 12-month workmanship guarantee. If our installation lets you down in that time, we return and fix it.
- Place
- Strachan (AB31)
- Region
- Aberdeenshire
- Cover
- 12 months on every job
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Why it’s worth doing now in Strachan
A seal that doesn’t match its tested detail gives false comfort. Correcting it means cutting it out and starting again with the specified product, and doing it once, properly, is cheaper. Exposed buildings in Scotland take a lot of weather, and for a smaller place like Strachan, a repair visit takes planning, so it’s better to act early.
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
Why us?
- Health and safety: CHAS accredited
- A fixed quote before work starts
- Failed material removed, not covered up
- CSCS-carded applicators
Read how commercial sealant jobs are priced or our accreditations.
From enquiry to sign-off
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Any old material is cut back to clean, sound faces, the manufacturer’s primer is applied where it’s called for, and the sealant is tooled off neatly. For work around Strachan, we aim for one trip, which is why we ask for photographs and a full list first. Outside work also needs a suitable weather window.
- First we go through the drawings, schedule or specification for the seals.
- On site, each opening is checked against the tested detail it is meant to follow.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Getting the site ready
- Tell staff and tenants when we will be in
- Agree which areas must stay open
- Send any specification or drawings in advance
Getting a fixed quote
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. To get it moving, ring 01277 525 020 or email drawings and photos.
Read more
Towns and villages near Strachan
Other services in Strachan
Fire stopping in Strachan: the local picture
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, with proprietary products, intumescent ones included, tested for their end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
Older community buildings such as Strachan Parish Church And Churchyard that have been rewired or given new heating can have service gaps through walls worth checking against the specification.
Strachan is about 18 miles south-west of Aberdeen, in Aberdeenshire. Our applicators travel to Strachan for work on service penetrations. 179 places across Aberdeenshire fall within our area, including Strachan. Our Aberdeen page has more on work in that area.
If you need fire stopping in AB31, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. For a building on Bowbutts Brae and Feugh View or nearby, we can quote for service penetrations. Close to Strachan, our area also takes in Banchory (3 miles north-east), Inchmarlo (3 miles north), Crossroads (5 miles east), Crathes (5 miles north-east) and Potarch (5 miles north-west). A short drive away, we cover Westhill (13 miles north-east), Stonehaven (12 miles east), Portlethen (15 miles east), Kemnay (15 miles north), Laurencekirk (13 miles south) and Aboyne (10 miles west).
Landmarks near Strachan
Well-known places in the area include Glen O'Dee Hospital (2.8 miles north) and Castlehill of Strachan (1.2 miles west). For a walk, there’s Scolty Hill and Black Loch.
Keeping the joints sound
After handover, these steps help:
- File the specified details where the next contractor can find them
- Ask which product is in place before decorating
- Arrange inspection before areas are covered up
- Treat an open penetration as a priority repair
Add risers, plant rooms and ceiling voids to routine fire-stopping checks. Watch for cracked sealant, new services with no seal and openings that have grown, and report them promptly.
Regular walk-rounds of service areas are worth the time. A cracked or disturbed seal found early is a small job.
When to call us in Strachan
Mixing products or improvising a detail breaks the link with the test evidence. Gaps beyond the tested size, shallow sealant, no backing where it was needed, or products from different systems mixed together are what we find most often.
Look out for the following:
- Unsealed openings around new pipes and cables
- Open linear gaps along the top of fire-resisting walls
- Seals that don’t match their tested detail
- Fire sealant pulled out of the opening
On a hospital site such as Glen O'Dee Hospital, 2.8 miles north of Strachan, fire-rated sealant goes in where the specification calls for it, with the work planned around the estates team’s permits.
Questions to ask before you book
- The terms of the workmanship guarantee
- Health and safety accreditation such as CHAS
- Whether their applicators hold CSCS cards
- What site paperwork they can supply
When to bring in a specialist
Redoing a failed joint typically costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
Quoting for work in Strachan
Before we quote, we look at:
- Specialist products, such as fire-rated or hygienic sealants
- Site requirements such as inductions and permits
- Location, for remote and island sites
- Quantities, in metres or numbers
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a quote.
What we need to price the job
A good diagnosis starts with the right details. Let us know:
- Drawings or a marked-up plan, if available
- Anything awkward about access or site hours
- The site address and postcode
- Asbestos survey details if the building is older
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Send what you have, and we’ll arrange a site visit if anything is unclear.