Fire-rated sealing and fire stopping in Inchmarlo, Aberdeenshire
Need fire stopping in Inchmarlo? It’s simple: send details, get a quote, we seal, guaranteed.
- Unsealed joints where partitions meet the slab
- Fire-rated sealant that has cracked or shrunk back
- Openings left by services added after handover
Fire stopping for Inchmarlo sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire stopping around Inchmarlo: points for this area
There are a number of hotels within about 2 miles of Inchmarlo. Bedroom-to-corridor walls in hotels are normally fire-resisting, so new cabling or pipework through them has to be sealed to the tested detail. Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, using products tested for the way they’re used. Our part is installing the specified fire-rated sealant to its tested detail.
Theatres, wards and plant rooms at sites like Glen O'Dee Hospital (to the south-east of Inchmarlo) all have compartment walls crossed by services. Industrial units on estates such as Tillybrake Industrial Estate, 1.9 miles east of Inchmarlo, often separate offices from warehouse space with fire-resisting walls, and new services through them need the specified seal. In a school such as Banchory Academy, fire-rated sealant goes in around service penetrations where it is specified.
Inchmarlo is about 16 miles south of Inverurie, in Aberdeenshire. Inchmarlo sits inside our coverage and the rest of Aberdeenshire, with the same fixed quotes and 12-month guarantee as everywhere else. Our Aberdeenshire coverage takes in 179 places. Our Aberdeen page has more on work in that area (17 miles or so).
We take on service penetrations across the AB31 postcode area, for business premises of every kind. Buildings on Target Wood Drive, North Mains and Queens Court are within our area for service penetrations. Nearby places we also cover include Banchory (2 miles east), Strachan (3 miles south), Torphins (4 miles north-west), Potarch (4 miles west) and Crathes (5 miles east) for service penetrations. Further afield, our area takes in Westhill (11 miles north-east), Stonehaven (14 miles south-east), Portlethen (15 miles east), Kemnay (12 miles north), Kintore (14 miles north-east) and Aboyne (10 miles west).
Local landmarks in Inchmarlo
Nearby you will also find Banchory Museum (1.6 miles south-east) and Castlehill of Strachan (3.4 miles south). The countryside around Inchmarlo includes Black Loch and Scolty Hill.
How we handle fire stopping in Inchmarlo
Sealant is the specified answer for plenty of openings, such as metal pipes, cables and some small ducts where the detail covers them. Other openings need collars, wraps, batts, pillows or boards. If the detail calls for something other than sealant, we say so rather than force sealant into it. We work on joints between fire-resisting walls and floors, small duct penetrations where the tested detail allows and linear gaps at wall heads, and the usual reasons a site gets in touch are expanding foam used as fire stopping and openings found when ceilings come down for a refit. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, in Inchmarlo it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Refurbishments in small hotels, schools and care homes around places like Inchmarlo can leave gaps around new services. A round of checks after M&E work is good practice, and any gaps found are sealed where fire-rated sealant is specified.
Every job is signed off with a 12-month guarantee. The promise is simple: if our work fails within that year, we put it right.
- Location
- Inchmarlo (AB31)
- Region
- Aberdeenshire
- Cover
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Updated
- 3 November 2026
Doing it in-house
Redoing a failed joint normally costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Certain joints really need a specialist: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong usually costs more in the end than doing them right.
Keeping the joints sound
Problems stay small when the joints are checked regularly. In particular:
- Include service cupboards in routine inspections
- File the specified details where the next contractor can find them
- Put resealing into every M&E and fit-out package
- Have penetrations checked while they can still be seen
Keep the product data and installation details with the building’s fire safety information. Anyone resealing later needs to know which product and detail were used.
Write fire stopping into the scope of any work crossing a compartment wall or floor. That way the opening is sealed while the trade and access are still there instead of being left for someone else.
What affects the price in Inchmarlo
We price every job individually. The things that drive the figure:
- The product specified
- Whether the work must be split into stages
- Joint width, depth and condition
- Induction, permit and paperwork requirements
Pricing service penetrations depends on quantities, condition and access, plus any specification you are working to. Ask us for a fixed quote.
What we need to price the job
Whether it’s one area or a whole building, these details speed things up:
- The product your specification calls for
- What the building is and how it’s used
- Access details, including height
- The asbestos register, for older buildings
Specifications, drawings and tender packages are welcome with any enquiry, and we will price the work to it. Smaller jobs need nothing more than photos and a few notes.
What we can’t put right
Not every problem is a sealant problem, and we’d rather tell you before you spend money. It won’t fix:
- Openings that need collars, wraps, batts or boards rather than sealant
- Walls or floors that aren’t fire-resisting to begin with
- Issuing fire ratings or certificates for seals
Not sure which it is? You can speak to us on 01277 525 020 or send details through our quote form and we’ll tell you honestly.
What we seal
- Cable penetrations
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Service gaps in risers
- Joints between fire-resisting walls and floors
Your questions answered
Would you work within a site like Glen O'Dee Hospital?
Yes, healthcare and care buildings are part of our work. Each area is agreed with the ward or department and the estates team in advance.
How do the Scottish rules apply to fire-rated sealing in Inchmarlo?
The non-domestic Technical Handbook, clause 2.1.14, expects a penetration to keep at least the wall or floor’s fire resistance period, with proprietary products tested for the use they’re put to. Design sits with the designer and the verifier; installation to the tested detail is our part.
How do you choose the sealant?
The specification comes first, if there is one. Without one, the joint decides: its movement, its surfaces and what it has to cope with.
Are you fully insured?
Yes. Mastic Doctor is fully insured, public liability included.
Does the weather affect the work?
It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Internal work is far less affected.
What hours do you work?
We’re in the office from 8am until 5pm, Monday to Friday. Tell us your site hours and access windows and the work will be fitted around them.
How soon can the area be used again?
We will confirm how long the chosen product needs to cure, and sign any area that should be left alone.
Other services in Inchmarlo
From enquiry to sign-off
We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. Where we can, we combine work around Inchmarlo with other jobs nearby. Let us know if your dates have any give.
- We start with your penetration schedule, drawings or specification.
- Access, permits and the order of areas are agreed with the site team.
- We compare every service penetration with its tested detail before sealing.
- Foam, ordinary sealant and debris come out so the seal starts clean.
- The specified backing and sealant go in to depth and are finished neatly.
- We tell you about openings that need a different product.
Getting the site ready
- Make sure the joints can be reached
- Point out any areas we must not close
- Send your site hours and access windows
Ask for a quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, call the office on 01277 525 020 or send details through our quote form.
Related advice
What the job involves on each surface
Drylining partitions
Plasterboard partitions are tested as a specific construction. We check that the product’s detail covers that partition type and board thickness first.
Risers and ceiling voids
Risers and ceiling voids hold most of a building’s service penetrations. Access is often tight, so we agree it with you in advance along with any permits your site needs.