Kirkton of Durris fire stopping
Need fire stopping in Kirkton of Durris? It’s simple: send details, get a quote, we seal, guaranteed.
- Head-of-wall gaps with no fire seal
- Openings found when ceilings come down for a refit
- Fire sealant pulled out of the opening
Fire stopping near Kirkton of Durris
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
How we handle fire stopping in Kirkton of Durris
Penetration seals are fire tested to BS EN 1366-3 and linear joint seals to BS EN 1366-4. That classification, such as EI 60 or EI 120, belongs to the product in its tested arrangement. So our job is to reproduce that arrangement faithfully. If you are dealing with fire-rated sealant that has cracked or shrunk back and head-of-wall gaps with no fire seal, we can put it right, whatever the surface. One point of contact handles commercial sealant work in Kirkton of Durris from the first photos to the final walk-round, for single jobs and planned programmes alike.
Hotels and care homes around smaller places like Kirkton of Durris often have services added during refurbishment. A round of checks after M&E work is good practice, and any gaps found are sealed where fire-rated sealant is specified.
Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.
- Place
- Kirkton of Durris (AB31)
- Region
- Aberdeenshire
- Cover
- 12 months on every job
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
When it isn’t the sealant
Some faults sit outside our scope, and we say so rather than covering them up:
- Writing the fire-stopping specification
- Walls or floors that aren’t fire-resisting to begin with
- Fire risk assessments, a job for a competent assessor
If in doubt, give us a call on 01277 525 020 or email a schedule or drawings and we will say what we think before you book.
Where we work in Kirkton of Durris
- Service gaps in risers
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Pipe penetrations
Service penetrations in Kirkton of Durris buildings
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, using products tested for the way they’re used. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
Older community buildings such as St Comgall's Church that have been rewired or given new heating can have service gaps through walls worth checking against the specification.
Kirkton of Durris is about 12 miles south-west of Aberdeen, in Aberdeenshire. We cover commercial sites throughout Kirkton of Durris, whether it’s a single job or part of a planned programme. Kirkton of Durris is one of 179 places we cover in Aberdeenshire. Our Aberdeen page has more on work in that area, about 12 miles away.
Postcode districts covered here: AB31. Nearby places we also cover include Balfour (1 mile east), Woodlands (1 mile east), Crathes (1 mile west), Crossroads (2 miles south-west) and Drumoak (2 miles north-east). Further afield, our area takes in Westhill (7 miles north-east), Stonehaven (8 miles south-east), Portlethen (9 miles east), Kemnay (13 miles north), Kintore (12 miles north) and Newtonhill (9 miles east).
Landmarks near Kirkton of Durris
A little further out are Durris Castle (0.6 miles north-east) and Glen O'Dee Hospital (5.5 miles west). Not far away are Meikle Carewe Hill.
Common questions from Kirkton of Durris clients
Is hospital work, at somewhere like Glen O'Dee Hospital, something you do?
Yes, healthcare and care buildings are part of our work. Work is phased so departments keep running, under the site’s own rules.
Which Scottish guidance covers penetration seals in Kirkton of Durris?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. The detail is set by the designer and goes through the warrant process; we install the specified product to its tested detail.
Is the work guaranteed?
Yes. It runs for twelve months and covers how we prepared and sealed the joints, but not damage, misuse or other trades’ work.
Do you take on small jobs?
Small jobs are welcome alongside larger packages. Send details for a fixed quote.
Are you CHAS accredited and on Constructionline?
Yes. We are CHAS accredited and a Constructionline member.
How long before the joints can be used?
Curing time varies by product, and we confirm it on the day, and sign any area that should be left alone.
Is it fine to apply new sealant on top of old?
No, never. Sealing over old material is one of the classic causes of early joint failure, so it all comes out first.
More services for Kirkton of Durris
From enquiry to sign-off
In a busy building, we agree a sequence with your contact so the disruption stays in one area at once. Each area is protected, prepared and sealed, then reopened once the sealant allows before we move to the next. Jobs near Kirkton of Durris are often grouped with others in the same area. Tell us how flexible your dates are.
- We ask for the product and detail your designer has specified.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
Before we start on site
- Tell staff and tenants when we’ll be in
- Point out any areas we must not close
- Let us know about inductions and permits
Quotes
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to ring 01277 525 020 or send photos by email with what you know.
Read more
Why deal with it now?
Leave a penetration open and smoke and fire can cross into the next compartment far earlier than intended. Putting it right is typically a modest job when the openings are accessible. Wait until ceilings close or areas are occupied and the same work becomes harder to reach. Renewing every failing joint on one visit is the sensible approach for a place like Kirkton of Durris. Send photographs and we will quote for everything together.
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
Why appoint us
- One contact handling all your sites
- Over 20 years of commercial sealing
- Joints cleaned back to sound surfaces
- Fully insured, including public liability cover
Read how commercial sealant jobs are priced or how we’re accredited.
Looking after the joints
Once the work is signed off, a little attention goes a long way:
- Settle who seals which penetrations at the start of a project
- Brief every trade that openings they make must be sealed
- Keep product data and details in the fire safety file
- Treat an open penetration as a priority repair
After every round of M&E works, check that the openings created have been sealed. A short check at the end of each job saves a long hunt later.
Specify fire stopping early on refits, not as an afterthought. Details can then be picked to suit the actual pipes, cables and ducts, and installation follows the programme.
When to call us in Kirkton of Durris
Some service penetrations were never sealed at all because they sat out of sight above a ceiling or inside a riser. They come to light during inspections, refits or when another trade lifts a tile.
Things that normally lead to an enquiry:
- Old intumescent sealant that has split away
- Penetration schedules that need working through
- Builders’ foam or ordinary silicone in compartment walls
- Seals that don’t match their tested detail
On a hospital site such as Glen O'Dee Hospital, 5.5 miles west of Kirkton of Durris, fire-rated sealant goes in where the specification calls for it, with the work planned around the estates team’s permits.
Comparing quotes
- Which product they’ll use, and why it suits the joint
- What site paperwork they can supply
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- Who will actually carry out the work
How the quote is worked out
These are the things that shape the price:
- The total length or number of joints
- Whether old sealant has to be cut out first
- Which sealant the job calls for
- Induction, permit and paperwork requirements
The price depends on how many linear metres there are, what has to come out first and the access. Call for a fixed quote when you are ready.
What to include in your enquiry
Diagnosis starts before we arrive. Let us know:
- The site address and postcode
- The product your specification calls for
- When you need the work done
- The asbestos register, for older buildings
Need a figure for a tender or a budget? We’ll quote against your scope and drawings that you can work with. If you have questions first, call the office on 01277 525 020 or send photos by email.