Crossroads fire stopping
Need fire stopping in Crossroads? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Fire seals cut back for extra cables and never reinstated
- Service penetrations left open after M&E works
- Fire stopping installed outside its tested range
Fire stopping for businesses in Crossroads
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire stopping in Crossroads, done properly
Most of our fire stopping work happens after the building is up. New cable runs, replaced pipework and extra data routes all punch holes in compartment walls. Those on your schedule are closed with the specified product. If you are dealing with service penetrations left open after M&E works and openings found when ceilings come down for a refit, we can help. Most enquiries from Crossroads start with one failed joint and grow into a wider look at the building: we look at the rest while we’re there and tell you what we find.
Hotels and care homes around smaller places like Crossroads often have services added during refurbishment. We fit the specified fire-rated sealant as its published detail shows and raise it if another product is needed.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Location
- Crossroads (AB31)
- Wider area
- Aberdeenshire
- Guarantee
- 12 months on every job
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
How the job changes by surface
Masonry and concrete
Openings through concrete vary from tidy cores to rough break-outs. The gap is measured at the widest point against the detail’s limits.
Risers and ceiling voids
Openings above suspended ceilings are easy to miss. We follow your schedule area by area and tell you about openings outside the list.
More services for Crossroads
Compartments and services around Crossroads
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, and products should be tested for their end use. We install what’s specified, to the product’s tested detail.
For a unit at a site such as Banchory Trade Park (2.8 miles north-west of Crossroads), new power or data runs between office and warehouse can breach a compartment wall.
Crossroads is about 14 miles south-west of Aberdeen, in Aberdeenshire. Our applicators travel to Crossroads for work on service penetrations, handled exactly as we handle every other area. Across Aberdeenshire, 179 places are covered, including Crossroads. Sites around Aberdeen have their own page, roughly 14 miles from Crossroads.
Anyone looking for fire stopping in AB31 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. We also cover Crathes (1 mile north), Kirkton of Durris (2 miles north-east), Woodlands (3 miles north-east), Balfour (3 miles north-east) and Banchory (3 miles north-west) for service penetrations. Further afield, our area takes in Westhill (9 miles north-east), Stonehaven (9 miles south-east), Portlethen (11 miles east), Kemnay (14 miles north), Laurencekirk (14 miles south) and Kintore (14 miles north).
Near you in Crossroads
Well-known places in the area include Crathes Castle (1.9 miles north-west) and Glen O'Dee Hospital (4.3 miles west). For a walk, there’s Scolty Hill.
How a job runs
On arrival, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before anything is cut or cleaned, and the work normally takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence. For a building near Crossroads, directions, keys and a contact on the day are worth sorting early. We’ll confirm the plan with the fixed quote.
- We read the specification, drawings or penetration schedule you send.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- We fit the backing the detail asks for, to the stated depth.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Before we start on site
- Let us know about inductions and permits
- Have the specification and drawings to hand
- Let building users know which areas are affected
Request a quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to give us a call on 01277 525 020 or email us with what you know.
Related advice
What affects the price in Crossroads
We price every job individually. The things that drive the figure:
- Backing rod, priming and other preparation
- Which sealant the job calls for
- Travel to remote or island sites
- Access and working height
Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits.
What to include in your enquiry
Diagnosis starts before we arrive. Let us know:
- Whether an asbestos survey exists
- When you need the work done
- Where the site is, with the postcode
- The type of building and who uses it
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To ask for one, give us a call on 01277 525 020 or email the details over.
When to call us in Crossroads
When a seal departs from its tested detail, the evidence no longer covers it. Gaps beyond the tested size, shallow sealant, no backing where it was needed, or products from different systems mixed together are what we find most often.
Common reasons buildings call us in:
- Hidden openings found during inspections
- Expanding foam used as fire stopping
- Fire-stopping items raised at inspection or handover
- Damaged fire seals in risers and voids
Large healthcare estates like Glen O'Dee Hospital, 4.3 miles west of Crossroads, change their services often, so penetration seals are worth checking after M&E work.
Before you book anyone
- How they handle RAMS and site documents
- Their pre-qualification and accreditations
- Whether old or failed sealant will be cut out, not overlaid
- Their public liability cover
What sealant work can’t fix
We check first that sealant really is the fix. It isn’t the answer for:
- Fire risk assessments, a job for a competent assessor
- Deciding what a wall or floor needs, which belongs to the designer
- Openings that need collars, wraps, batts or boards rather than sealant
If you’re not sure, just call 01277 525 020 or email the details over and we’ll give you a straight answer before you book.
Surfaces we seal
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Cable penetrations
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Service gaps in risers
Common questions from Crossroads clients
What do Scotland’s building standards say about service penetrations in Crossroads?
Under Scotland’s non-domestic Technical Handbook (clause 2.1.14), service penetrations should keep at least the wall or floor’s fire resistance duration, using products tested for their end use. The detail is set by the designer and goes through the warrant process; we install the specified product to its tested detail.
Can you take on a job at a hospital such as Glen O'Dee Hospital?
Yes, hospitals are one of the sectors we cover. We follow the site’s permits, sign-in and infection-control procedures in every area.
Can weather delay the job?
It can, when the joints are outside. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Internal work is far less affected.
How many days will you need on site?
The duration is planned around your programme and the access we’re given. We will give you an estimate of time on site when we quote.
Can you send site paperwork?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we will confirm with the quote.
How do you deal with asbestos in old sealant?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. We check the asbestos register before cutting out old sealant in an older building, and work stops until any suspect material has been tested. We don’t remove asbestos-containing materials.
Which sealant will you use?
A specification, where there is one, decides it. Without one, the joint decides: its movement, its surfaces and what it has to cope with.
Site staff or a sealant specialist?
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.