Fire Stopping in Stone Corner
Fire-rated and intumescent sealing of service penetrations and linear gaps in Stone Corner. CHAS accredited and fully insured, with a 12-month guarantee.
- Seals disturbed by maintenance and left open
- Fire stopping installed outside its tested range
- Old intumescent sealant that has split away
Fire stopping for Stone Corner sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How we handle fire stopping in Stone Corner
Our applicators are CSCS-carded, and we are CHAS accredited and a Constructionline member. We don’t hold a third-party fire-stopping installer certificate, and we won’t pretend otherwise. What we offer is careful installation of the specified sealant to its tested detail, with a 12-month guarantee on our workmanship. We work on pipe penetrations, small duct penetrations where the tested detail allows and joints between fire-resisting walls and floors, and the usual reasons a site gets in touch are damaged fire seals in risers and voids and penetration schedules that need working through. Looking for mastic applicators who cover Stone Corner? We have been sealing commercial buildings since 2005.
Barn and farm-building conversions near places like Stone Corner often combine new partitions with old walls. A penetration seal only performs as tested if product, substrate, service, gap and depth all match the detail.
Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.
- Where
- Stone Corner (TN30)
- Region
- Kent
- Guarantee
- 12 months on our workmanship
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Updated
- 3 November 2026
When to bring in a specialist
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
How the job changes by surface
Cables and cable bundles
New data and power cables are the most common breach we see. We reseal around them to the specified detail.
Metal pipes
Sealant details often cover copper and steel pipework. The tested detail sets the pipe size range, gap, depth and whether insulation can stay on.
Diagnose, treat, sign off
The first thing on site is a walk round with your contact, agreeing which joints are in scope, where to start and what must stay open. Then we strip out anything that has failed, prepare every joint and seal it. Jobs in and around smaller places like Stone Corner are usually planned as a single visit, so we ask for photographs and rough sizes first. That way the right products come on the day.
- First we go through the drawings, schedule or specification for the seals and raise any questions before we price.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- We apply the specified sealant to the depth and around the services as the detail shows.
- If an opening needs something other than sealant, we tell you instead of improvising.
Getting the site ready
- Point out any areas we must not close
- Warn occupants and staff about the work
- For older buildings, check the asbestos register before work
Getting a fixed quote
For a fixed quote, call 01277 525 020 or send details through our quote form, telling us the site location and the nature of the job. Our quote form is another easy route.
Related advice
For managing agents and facilities managers
Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
Cost factors for service penetrations
Each job is priced on its own details. The main factors are:
- Phasing around occupants
- Induction, permit and paperwork requirements
- The size and state of each joint
- Quantities, in metres or numbers
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
Details that help us quote
It doesn’t need to be a full survey. These details are enough to start:
- The site address and postcode
- Your programme or deadline
- Specification clauses that apply
- The type of building and who uses it
Let us know the site, the scope and your timescale, and we’ll put a fixed quote together. The easiest way is to give us a call on 01277 525 020 or use the quote form.
After the work
Regular inspection catches problems early. In particular:
- Include service cupboards in routine inspections
- Keep product data and details in the fire safety file
- Ask the designer to confirm details early on refits
- Arrange inspection before areas are covered up
New services after handover are a common way fire stopping gets breached. Building it into each contractor’s sign-off keeps the walls intact.
Ask every contractor who works in risers or voids to report openings they create. It costs little and catches breaches early.
Towns and villages near Stone Corner
Also in Stone Corner
Fire stopping around Stone Corner: what changes locally
Approved Document B is the English guidance that covers fire stopping around openings and penetrations. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. At about 48 miles from central London, Stone Corner is within reach of the capital. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls.
For buildings in and around Stone Corner, fire-rated sealant is installed where it is specified, to the manufacturer’s tested detail. For a building at a site such as Pickhill Business Centre, which lies north-west of Stone Corner, a check of penetration seals after each fit-out is good practice.
Stone Corner is about 10 miles south-west of Ashford, in Kent. We cover commercial sites throughout Stone Corner, for single jobs and planned programmes alike. Stone Corner is one of 931 places we cover in Kent. Brighton is covered too, around 40 miles from Stone Corner.
Business premises anywhere in TN30 are within our area. Just outside Stone Corner, we also work in Acton (1 mile south-west), The Stocks (1 mile south), Reading Street (1 mile north-east), Wittersham (1 mile south-west) and Stone in Oxney (2 miles east). Nearby towns on our patch include Ashford (10 miles north-east), Tenterden (3 miles north-west), Kennington (12 miles north-east), New Romney (10 miles east), Staplehurst (12 miles north-west) and Stanhope (9 miles north-east).
Landmarks near Stone Corner
For rail, the closest station is Appledore (Kent) station, roughly 3.9 miles east of the centre. A little further out are Smallhythe Place (1.4 miles north-west). Green spaces nearby include Flatropers Wood.
Questions we are asked in Stone Corner
Can you work at a site such as Pickhill Business Centre, by Stone Corner?
Yes. We cover Stone Corner and the area around it, including industrial estates, business parks and retail parks such as Pickhill Business Centre. To start, just give us a call on 01277 525 020 or send photos by email with the unit, the joints involved and your access times.
Is Stone Corner off your patch?
No. Places such as Stone Corner are covered as much as the big towns. We cover Greater London and the counties of the South East. We plan jobs in smaller places so return trips are kept to a minimum.
Can you work to our specification?
Yes. Include it with the drawings when you ask for a quote, and we will price the work to it.
What will the job cost?
We don’t publish prices, as every site differs. With photos or drawings, we can give you a fixed quote.
When can the area be used after sealing?
Curing time varies by product, and we confirm it on the day, and flag anything to keep off until it has cured.
Do you approve fire stopping for building control?
No. We don’t certify or sign off fire stopping, and we hold no third-party fire-stopping installer certificate. Our part is fitting the specified product to its tested detail, and any records you need can be confirmed with the quote.
What about RAMS and site documents?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we will confirm with the quote.