Fire Stopping in New Romney
Planning work on a service penetration in New Romney? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Unsealed openings around new pipes and cables
- Non-fire-rated filler around services
- Snag lists that include open service penetrations
Fire stopping near New Romney
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
How we handle fire stopping in New Romney
Where pipes, cables and other services cross a compartment wall or floor, the opening around them has to be closed so fire and smoke can’t move between compartments. Our job is fitting fire-rated and intumescent sealant at those service penetrations, and along linear gaps, where it is the specified product. Each seal follows the manufacturer’s tested detail, not a rule of thumb. If you are dealing with fire seals cut back for extra cables and never reinstated and improvised or mixed-product fire seals, we can help, on small duct penetrations where the tested detail allows, pipe penetrations and linear gaps at wall heads alike. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in New Romney, that means joint design, primers and backing rod as standard.
In places the size of New Romney, fire-resisting walls and floors are found in schools, care homes, health centres and mixed-use buildings. Around those penetrations, fire-rated sealant is installed if specified, with depth, backing and gap all as tested.
Every job we finish is backed by a 12-month workmanship guarantee. If our installation lets you down in that time, we return and fix it.
- Place
- New Romney (TN28)
- Wider area
- Kent
- Cover
- 12 months on every job
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Why deal with it now?
Fire stopping is a regular point raised at inspections and handover. Finding unsealed or improvised openings late can hold up a programme which is why earlier is better. Over time, UV, weather and movement wear any sealant out. Renewing it in good time keeps the building weathertight.
The specified product makes a difference, and so does the preparation, such as cutting out, priming or new backing rod. Access, phasing and site rules also count.
Why choose Mastic Doctor in New Romney
- Joints cleaned back to sound surfaces
- One phone line for London, the South East and Scotland
- Work to your specification and the manufacturer’s guidance
- Fully insured
Read our cost guide or how we’re accredited.
What sets the cost
Quotes vary with the job. It mainly depends on:
- Quantities, in metres or numbers
- The site’s rules and procedures
- How much existing material needs removing
- Backing rod, priming and other preparation
Pricing service penetrations depends on how many there are, their condition and the access. Call for a quote.
What to include in your enquiry
A few photos plus some basic facts will normally do. It helps to include:
- Clear photos of the problem areas
- Where the site is, with the postcode
- Asbestos survey details if the building is older
- Drawings or a marked-up plan, if available
Let us know the site, the scope and your timescale, and we’ll put a fixed quote together. To get it moving, call the office on 01277 525 020 or send details through our quote form.
Where services cross fire walls in New Romney
New Romney is about 57 miles from central London. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls, and the gaps need sealing with the specified product. In England, Approved Document B covers fire stopping of openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. What we install is set by the specification, and it goes in to the tested detail.
For a unit at a site such as Peak Industrial Park, 2.3 miles to the south-west of New Romney, new power or data runs between office and warehouse can breach a compartment wall. Hotels like The Ship Hotel (less than half a mile north of New Romney) are refurbished in phases, and each phase can open up compartment walls.
New Romney is about 8 miles south-west of Hythe, in Kent. Businesses, contractors and managing agents in New Romney use us for work on service penetrations. 931 places across Kent fall within our area, including New Romney. Sites around Brighton have their own page, roughly 48 miles from New Romney.
Postcode districts covered here: TN28 for service penetrations. Buildings on High Street, Church Road and Station Road are within our area for service penetrations. With the A259 and B2071 nearby, New Romney is straightforward for us to reach. Nearby places we also cover include Littlestone-on-Sea (1 mile east), Greatstone-on-Sea (1 mile south-east), St Mary in the Marsh (2 miles north), St Mary's Bay (2 miles north-east) and Old Romney (2 miles west) for service penetrations. Further afield, our area takes in Ashford (11 miles north), Folkestone (12 miles north-east), Hythe (8 miles north-east), Hawkinge (13 miles north-east), Tenterden (12 miles north-west) and Cheriton (11 miles north-east).
Local landmarks in New Romney
Around New Romney, our work takes us to commercial buildings near Romney Warren Country Park, The Marsh Academy and The Marsh Academy and the streets around them. A little further out are Lydd Town Museum (3 miles south-west) and Romney 'castle' (2.1 miles west). Not far away are Burnthouse Pen and Dungeness National.
Signs you need fire stopping in New Romney
Linear gaps fail where a fire-resisting wall meets a slab, soffit or another wall. Movement in the frame or slab can open the joint. Linear joint details set a width range and movement capability, and the seal has to sit within them.
These are often picked up first by site or facilities staff:
- Unsealed penetrations discovered above suspended ceilings
- Improvised or mixed-product fire seals
- Unsealed joints where partitions meet the slab
- Openings left by services added after handover
For a school such as St Nicholas Church of England Primary Academy, penetration sealing fits best at the end of the summer works.
Comparing quotes
- Whether their applicators hold CSCS cards
- How they’ll work around occupants
- The terms of the workmanship guarantee
- Which product they’ll use, and why it suits the joint
Maintenance after handover
A few simple habits keep the new joints working:
- Check risers and ceiling voids after each round of works
- Brief every trade that openings they make must be sealed
- Flag new cables with no seal around them
- Ask which product is in place before decorating
After the work, brief anyone else working in the area that the openings are now sealed. If a seal has to be opened for a new service, it should be reinstated to the same detail.
Looking at service areas on a regular cycle pays off. A cracked or disturbed seal found early is a small job.
Also near New Romney
More services for New Romney
Different surfaces, different methods
Drylining partitions
Holes in board are often cut larger than needed. An oversized hole may be outside the sealant’s range, and the detail may call for board patching or another product.
Masonry and concrete
Openings through concrete vary from tidy cores to rough break-outs. Each gap is measured where it is widest so we know it sits within the tested range.
Our process
Site rules come first: sign-in, induction and whatever permit system the building uses. Once we are cleared to begin, we take the joints in the sequence agreed with you, and each area is checked before we leave it. For a site in New Romney, we plan so the whole job is done in one go where possible. Clear photographs and measurements help us bring the right products.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- Each opening is checked for wall or floor type, service, gap and depth.
- Unsuitable material is removed and the opening cleaned first.
- The specified backing and sealant go in to depth and are finished neatly.
- Anything outside the detail is reported to you rather than sealed.
Before we start on site
- Agree which areas must stay open
- Let building users know which areas are affected
- Move anything stored against the joints
Get a fixed quote
Need a figure for a tender or a budget? We will quote against your scope and drawings that you can work with. If you have questions first, call 01277 525 020 or email a schedule or drawings.
Related advice
FAQs: New Romney
Does your area include sites such as Peak Industrial Park, near New Romney?
Yes. Estates, retail parks and business parks around New Romney, Peak Industrial Park among them, are all within reach. Photos and a short description are enough for a first look.
How does the move away from BS 476 affect penetration seals in New Romney?
References to BS 476 classes are being removed from Approved Document B from 2 September 2029, after which BS EN 13501-2 classification is the route, subject to transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.
Do you seal on top of existing sealant?
No. Sealing over old material is one of the classic causes of early joint failure, so it all comes out first.
How long does a typical visit take?
It depends on the scope, though a typical visit typically takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.
Can staff carry on working while you are here?
Yes, as long as we plan it. We agree a sequence with your contact so just one area at a time is disrupted.
What hours do you work?
Give us your site hours and any access windows in your enquiry, and we will plan around them. You can reach the office between 8am and 5pm, Monday to Friday.
Will you come and look before quoting?
Many jobs can be quoted from photos, drawings or a joint schedule. If the job needs a look first, we’ll arrange a visit.