Fire-rated sealing and fire stopping in Reading Street, Kent
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Reading Street and the surrounding area. Send photographs or drawings for a fixed quote.
- Open linear gaps along the top of fire-resisting walls
- Expanding foam used as fire stopping
- Old intumescent sealant that has split away
Need fire stopping in Reading Street?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
FAQs: Reading Street
How does the removal of BS 476 from Approved Document B affect fire-rated sealing in Reading Street?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
Is Reading Street off your patch?
No. Places such as Reading Street are covered as much as the big towns. We work across Greater London and the South East. We plan jobs in smaller places so return trips are kept to a minimum.
Can you work to our specification?
Yes. Include it with the drawings when you ask for a quote, and we’ll price the work to it, flagging anything that needs clarifying.
Is colour matching possible?
That depends on the product specified. Some ranges offer many colours, others very few, so we’ll confirm the colours available for the specified product with the quote.
How long before the joints can be used?
Curing time varies by product, and we confirm it on the day, and flag anything to keep off until it has cured.
Are you CHAS accredited and on Constructionline?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
How long will the new sealant last?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
Fire stopping in Reading Street, done properly
Sealant is the specified answer for plenty of openings, such as metal pipes, cables and some small ducts where the detail covers them. Other openings need collars, wraps, batts, pillows or boards. If the detail calls for something other than sealant, we say so rather than force sealant into it. We work on pipe penetrations, service gaps in risers and cable penetrations, and the usual reasons a site gets in touch are old intumescent sealant that has split away and hidden openings found during inspections. Whoever orders the work in Reading Street, the brief is typically the same: a clear scope, tidy work and joints that don’t fail again.
A job near Reading Street is typically planned around one visit, with the specification and photos sent in advance. Design and sign-off belong to the designer or building control; we install what’s specified.
Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Where
- Reading Street (TN30)
- Wider area
- Kent
- Guarantee
- 12 months on our workmanship
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Surface by surface
Risers and ceiling voids
Voids hide a lot of unsealed openings. We work through the areas on your schedule methodically, and note anything we find that isn’t on it.
Masonry and concrete
Many seals are made in blockwork, brickwork or concrete slabs. Dust and debris are cleared from the opening, so the sealant and any backing sit properly.
Why it’s worth doing now in Reading Street
Sealing behind the M&E trades area by area beats a sweep at the end. While the area is still open, every opening is easy to see and reach, and the right detail can be checked at the time. For buildings around smaller places like Reading Street, water damage can go unnoticed for longer, especially where a building isn’t used daily, which gives a failed joint time to do damage. Resealing early avoids that.
There’s no price list, since every building and every scope is different. For a fixed figure, call for a quote.
Why appoint us
- Constructionline member
- 12-month guarantee on workmanship
- Specification-led, product-correct work
- Clear, fixed quotes
Read our cost guide or how we’re accredited.
Where services cross fire walls in Reading Street
In England, Approved Document B covers fire stopping of openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. Reading Street is about 48 miles from central London. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls, and the gaps need sealing with the specified product.
Tenant changes at parks like Pickhill Business Centre, 2.2 miles west of Reading Street, bring new data and services, and openings through fire-resisting walls need the specified seal. Halls and meeting rooms at places like Church of St Mary sometimes gain new services, and any compartment wall crossed needs the specified seal.
Reading Street is about 9 miles south-west of Ashford, in Kent. Anywhere in TN30, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. Across Kent, 931 places are covered, Reading Street among them. We also cover Brighton, some 41 miles away.
Commercial sites across TN30 are covered for service penetrations. Just outside Reading Street, we also work in Stone Corner (1 mile south-west), Acton (2 miles south-west), Appledore Heath (2 miles east), Leigh Green (2 miles north-west) and Stone in Oxney (2 miles south-east). Bigger towns within reach include Ashford (9 miles north-east), Hythe (15 miles east), Tenterden (3 miles north-west), Kennington (11 miles north-east), New Romney (10 miles south-east) and Staplehurst (12 miles north-west).
What’s near Reading Street
Reading Street’s nearest station is Appledore (Kent) station, about 3.3 miles east of the centre. Well-known places in the area include Smallhythe Place (1.8 miles west). The countryside around Reading Street includes Orlestone Forest.
Towns and villages near Reading Street
What else we do in Reading Street
On site: what to expect
When we get to site, we sign in, go through any site induction and check how permits are handled. Floors, finishes and fittings next to the joints are covered before any cutting starts, and the work normally takes anything from one day to a planned run of visits, depending on the number of seals and the access. For work around Reading Street, we aim to finish in one visit, so photographs and measurements up front really help. Then the right materials arrive with us.
- We ask for the product and detail your designer has specified.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
Getting the site ready
- Arrange parking or a loading space
- Send asbestos survey details if the building is pre-2000
- Tell us your opening times and when work is allowed
Quotes
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to ring 01277 525 020 or send details through our quote form with what you know.
Related advice
Commercial clients in Reading Street
Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, with each stage agreed with your site contact.
CHAS accredited and a Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
When it isn’t the sealant
Before quoting, we check that sealant is the right answer. It won’t put right:
- Approving the work on behalf of building control
- Fire risk assessments, a job for a competent assessor
- Designing or specifying fire stopping, which sits with the designer or fire engineer
Not sure which it is? You can call the office on 01277 525 020 or email the details over and we will tell you honestly before you book.
Where we work in Reading Street
- Service gaps in risers
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Cable penetrations
What sets the cost
Before we quote, we look at:
- Phasing around occupants
- Removal of failed or old sealant
- Location, for remote and island sites
- Backing rod, priming and other preparation
A quote for service penetrations depends on quantities, condition and access, plus any specification you are working to. Ask us for a fixed quote.
What to include in your enquiry
A good diagnosis starts with the right details. Let us know:
- Asbestos survey details if the building is older
- Where the site is, with the postcode
- Whether the building will be occupied during the work
- Anything awkward about access or site hours
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price the work to it. For smaller jobs, photos and a description will do.