Expansion and movement joint sealing in Skeabrae, Orkney Islands
Expansion and movement joint sealing in walls, decks and floors across Skeabrae, by CSCS-carded applicators. CHAS accredited and fully insured.
- Layers of sealant in a movement joint
- Sealant peeling off one face of the joint
- Torn sealant in brick or block movement joints
Expansion joint sealing near Skeabrae
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
How we handle expansion joint sealing in Skeabrae
Long runs of brick or block have movement joints built in, and they’re easy to miss until the sealant fails. Failed sealant here lets rain into the wall and can leave the joint full of debris. The old seal comes out, backing goes in and a sealant with the right movement class is applied with primer where the maker calls for it. Site teams most often ask us about water dripping through deck or ramp joints and chipped joint edges on forklift routes, across cladding panel joints, podiums and floor movement joints and brickwork movement joints. Whoever orders the work in Skeabrae, the brief is usually the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
For outside joints near Skeabrae, the Scottish weather sets the timetable: sealant needs a dry joint and a temperature within its range, so dates have some give. Internal floors can be done whenever suits the site.
The 12-month guarantee covers our workmanship: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Place
- Skeabrae (KW17)
- Wider area
- Orkney Islands
- Cover
- 12 months on every job
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
When to call us in Skeabrae
Sealant peeling cleanly off one side is an adhesion failure. Poor preparation, a skipped primer, or sealant bonded to the back of the joint are typical reasons.
Most enquiries start with something like this:
- Brittle, chalky sealant on external joints
- Joints where the bead has lost adhesion
- Water getting into the wall through a failed joint
- Spalled or broken joint edges in floors and decks
Around Skeabrae, each joint gets a filler or sealant matched to what crosses it and how much it moves.
Before you book anyone
- What level of public liability insurance do they hold?
- Do they follow the manufacturer’s priming guidance?
- The terms of the workmanship guarantee
- Which product they’ll use, and why it suits the joint
Why it’s worth doing now in Skeabrae
Leaving a failed movement joint rarely stays a small problem. Water and debris get in, the joint jams and the edges spall. Acting at the first split keeps the cost down. Exposed buildings in Scotland take a lot of weather, and for a smaller place like Skeabrae, a repair visit takes planning, so it’s better to act early.
Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote, and you’ll have a fixed figure to work with.
Why choose Mastic Doctor in Skeabrae
- Joints cleaned back to sound surfaces
- A Constructionline member, so easy to vet
- Colours confirmed for the specified product
- Colours chosen to suit frames, cladding or finishes where possible
Read how commercial sealant jobs are priced and our accreditations and insurance.
Expansion joint sealing in Skeabrae: the local picture
Skeabrae lies within about 3 miles of the sea. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, which is why split joints are worth sealing before the edges deteriorate. Work on Skeabrae has to fit the ferry timetable and the forecast. Approximate joint lengths and widths let us bring enough material first time.
A joint near Skeabrae that has lost its sealant lets in water and grit, and the edges suffer next.
Skeabrae is about 13 miles north-west of Kirkwall, in the Orkney Islands. Any commercial site in Skeabrae is covered. 51 places across the Orkney Islands fall within our area, Skeabrae among them.
Commercial sites across KW17 are covered. We also cover Dounby (1 mile east), Hourston (2 miles south-east), Scarwell (2 miles west), Russland (3 miles south-east) and Tenston (3 miles south). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so mention the location when you call 01277 525 020 or use the quote form.
Local landmarks in Skeabrae
Well-known places in the area include Earl's Palace (4.6 miles north-west) and Kirbuster Farm Museum (2.8 miles north). Not far away are Orr Shun and Greeny Hill.
Common questions from Skeabrae clients
Can you take on a job in Skeabrae, on the island?
Yes. Islands are part of our area, Skeabrae included. Ferry times and the weather set the plan, so we ask for photos and a full list first.
Do we have to stop operations in Skeabrae while the joints are sealed?
Rarely. Work is phased around your operations. Tell us which hours and entrances we can use and we’ll plan from there.
When can you be on site?
Mention the site’s hours and access windows in your enquiry, and we will schedule the work to suit. You can reach the office between 8am and 5pm, Monday to Friday.
How do we ask for a quote?
The quote form is the simplest route, though you can also ring 01277 525 020 or email the details over. Include photos or drawings if you have them.
Will you quote for a small job?
Single areas, one-off repairs and whole buildings are all quoted the same way: send details, get a fixed quote, we seal, guaranteed.
Can the sealant be colour-matched?
In many cases, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We confirm what’s available for the specified product when we quote.
What sealant do you use in movement joints?
Whatever suits the joint and the specification. The quote states the sealant and its movement class so there are no surprises.
On site: what to expect
We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. Then we strip out anything that has failed, prepare every joint and seal it. Travel to smaller Scottish places like Skeabrae is planned so the job is finished in one visit where possible, so photographs, sizes and a full list matter. External joints need a dry spell as well.
- We look at the joints, their width and how they’ve failed.
- You get a fixed quote with the product and its movement capability stated.
- We strip out the old seal and prepare the faces.
- We control the depth with backing rod or, in shallow joints, bond-breaker tape.
- After any primer the maker requires, the bead is applied and tooled so it grips two sides only.
- Each joint is inspected and handed over with our 12-month guarantee.
Getting the site ready
- For older buildings, check the asbestos register before work
- Clear stock, furniture or equipment away from the joints
- Tell us what induction or permit system the site runs
Get a fixed quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price the work to it. For smaller jobs, photos and a description will do.
Advice
Surface by surface
Brickwork and blockwork joints
Masonry faces are often porous, dusty or crumbly. We clean them back to sound material and prime where the manufacturer specifies before the bead goes in.
Concrete and precast panel joints
Precast panels often have surface residues that sealant won’t bond to. Proper cleaning and primer where specified give a sound bond.
Should maintenance staff do it?
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Also in Skeabrae
When something else is needed
Honesty saves time and money. New sealant won’t cure:
- Changing the joint layout or spacing of a structure
- Mechanical expansion joint covers, cover plates or proprietary joint systems (a specialist supplier’s job)
- Structural movement beyond what the joints were designed for (that needs a structural engineer)
If you’re not sure, just call 01277 525 020 or email drawings and photos and we will give you a straight answer before you book.
Surfaces we seal
- Brickwork movement joints
- Car park decks and ramps
- Cladding panel joints
- Blockwork control joints
- Podiums and floor movement joints
- Precast concrete panel joints