Fire Stopping in Scatness
Fire-rated and intumescent sealing of service penetrations and linear gaps across Scatness, by CSCS-carded applicators. CHAS accredited and fully insured.
- Unsealed openings around new pipes and cables
- Damaged fire seals in risers and voids
- Penetration schedules that need working through
Need fire stopping in Scatness?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
FAQs: Scatness
Which Scottish guidance covers penetration seals in Scatness?
Under Scotland’s non-domestic Technical Handbook (clause 2.1.14), service penetrations should keep at least the wall or floor’s fire resistance duration, using products tested for their end use. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
Do you decide the fire-stopping details for buildings in Scatness?
No. The designer or fire engineer sets the detail and building control accepts it. Our part is installing the specified product to its tested detail, and telling you if the detail calls for something other than sealant.
How soon can the area be used again?
That comes down to the sealant and the temperature. Some take light use quickly, others need longer to cure, so we’ll confirm the curing time on the day.
Are you fully insured?
Yes. Mastic Doctor is fully insured, public liability included.
Will you just go over the old sealant?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
How long will the new sealant last?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular checks let you plan resealing before leaks or damage.
Are your applicators CSCS-carded?
Yes. Should the site need card details in advance, let us know and we will send them with the quote.
About our fire stopping in Scatness
On a fit-out or refurbishment, we follow the services contractors floor by floor. To price a package, call 01277 525 020 or use the quote form with the schedule or marked-up drawings alongside the manufacturer’s details. Tell us what records you need and we’ll confirm with the quote. We work on pipe penetrations, service gaps in risers and cable penetrations, and the usual reasons a site gets in touch are non-fire-rated filler around services and snag lists that include open service penetrations. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, in Scatness it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Hotels and care homes around smaller places like Scatness often have services added during refurbishment. A round of checks after M&E work is good practice, and any gaps found are sealed where fire-rated sealant is specified.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Place
- Scatness (ZE3)
- Region
- Shetland Islands
- Cover
- A 12-month guarantee
- Quote
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Different surfaces, different methods
Cables and cable bundles
Data cabling added after handover is a regular cause of open service penetrations. Openings around new cables are resealed to the detail, and we tell you if the bundle exceeds what sealant covers.
Risers and ceiling voids
Service risers and the voids above ceilings are where openings collect. Access is often tight, so we agree it with you in advance along with any permits your site needs.
Compartment walls and floors in Scatness
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, with proprietary products, intumescent ones included, tested for their end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail. Work on Scatness has to fit the ferry timetable and the forecast. We need the specification and a count of penetrations before we sail.
Hotels like Sumburgh Hotel (to the south-east of Scatness) are refurbished in phases, and each phase can open up compartment walls.
Scatness is in the Shetland Islands. Businesses, contractors and managing agents in Scatness use us for work on service penetrations, as part of our coverage of the Shetland Islands. Scatness is one of 63 places in the Shetland Islands on our list for service penetrations.
Work on service penetrations is covered throughout ZE3, for business premises of every kind. We cover commercial and managed buildings on Sanblister Place and Colonial Place. Close to Scatness, our area also takes in Toab (1 mile north), Exnaboe (1 mile north), Hestingott (1 mile north), Boddam (3 miles north) and South Scousburgh (4 miles north). Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you ring 01277 525 020 or use the quote form.
Local landmarks in Scatness
Nearby you will also find Shetland Crofthouse Museum (2.8 miles north). The countryside around Scatness includes Sumburgh Head RSPB reserve and Loch of Huesbreck.
When to call us in Scatness
Linear gaps fail where a fire-resisting wall meets a slab, soffit or another wall. Movement in the frame or slab can open the joint, and the wrong product can split as a result. Linear joint details set a width range and movement capability, and the seal has to sit within them.
Common reasons buildings call us in:
- Fire stopping installed outside its tested range
- Snag lists that include open service penetrations
- Unsealed joints where partitions meet the slab
- Fire-rated sealant that has cracked or shrunk back
Buildings near Scatness get the fire-rated product that’s specified, installed to its tested detail.
Comparing quotes
- Proof of insurance
- Which product they’ll use, and why it suits the joint
- How they’ll work around occupants
- What the guarantee covers, and for how long
Towns and villages near Scatness
Also in Scatness
On site: what to expect
On arrival, we sign in, go through any site induction and check how permits are handled. Floors, finishes and fittings next to the joints are covered before anything is cut or cleaned, with the work itself normally taking longer where risers, ceiling voids or occupied floors have to be worked through in sequence. Travel to smaller Scottish places like Scatness is planned so the job is finished in one visit where possible, which is why we ask for photos and a full list first. External joints need a dry spell as well.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Improvised fillers and failed sealant are removed.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
What we need from you
- Tell us your opening times and when work is allowed
- Move anything stored against the joints
- Agree which areas must stay open
Request a quote
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To ask for one, speak to us on 01277 525 020 or email us.
Advice
When to bring in a specialist
Redoing a failed joint normally costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
Why it’s worth doing now in Scatness
A seal that doesn’t match its tested detail gives false comfort. Correcting it means cutting it out and starting again with the specified product, so it makes sense to get it right first time. Renewing every failing joint on one visit is the sensible approach for a place like Scatness. Photos of each area help us quote the whole job.
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we will put a fixed figure on it.
Why us?
- One contact handling all your sites
- Work to your specification and the manufacturer’s guidance
- Our applicators hold CSCS cards
- Fully insured, including public liability cover
Read how commercial sealant jobs are priced and how we’re accredited.
Commercial clients in Scatness
CHAS accredited and a Constructionline member, we are straightforward to vet for your supplier list. We are fully insured, and our insurance certificate can go with the quote.
When you manage a building on behalf of an owner, you need clear quotes and clear reporting. You get a fixed quote, an agreed scope and a walk round at the end.