Fire-rated sealing and fire stopping in Boddam, Shetland Islands
Commercial sealant work in Boddam for contractors, FMs and building owners: fire-rated and intumescent sealing of service penetrations and linear gaps, quoted at a fixed price.
- Expanding foam used as fire stopping
- Unsealed joints where partitions meet the slab
- Fire-rated sealant that has cracked or shrunk back
Fire stopping across Boddam
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Should maintenance staff do it?
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
Fire stopping in Boddam
A fire-rated sealant is only one part of a tested system: the evidence covers a specific product, wall or floor type, service, gap, depth and backing. Before we seal anything, we check the opening against the detail it is meant to follow, and raise it with you if it falls outside. We work on linear gaps at wall heads, pipe penetrations and service gaps in risers, and the failures we are asked to look at most are expanding foam used as fire stopping and openings left by services added after handover. For commercial sealant work in Boddam, you deal with one contact from quote to sign-off, whether it’s one building or several.
In smaller Scottish places like Boddam, buildings with fire-resisting walls typically include schools, care homes, hotels and health centres. Those penetrations are closed with the product the specification names, built up as tested.
We stand by our work with a 12-month guarantee. It covers how we prepared and applied the sealant.
- Where
- Boddam (ZE2)
- Region
- Shetland Islands
- Guarantee
- 12 months on every job
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
From enquiry to sign-off
Tell us your site hours and access windows and we’ll plan around them. While we’re working, the area stays contained and tidy, and your contact hears from us before we move to the next area. Tell us who will meet us and how to get in at your building near Boddam. We will confirm the plan with the fixed quote.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- Completed areas are checked with you, with the records agreed when we quoted.
What we need from you
- Share the asbestos register for older buildings
- Tell us which areas need to stay in use
- Let us know about inductions and permits
Quotes
Let us know the site, the scope and your timescale, and we’ll put a fixed quote together. The easiest way is to phone 01277 525 020 or email drawings and photos.
Related advice
How the job changes by surface
Small ducts
We seal around ducts only within what the tested detail covers. The ductwork, its supports and any dampers are for the ductwork contractor.
Drylining partitions
Holes in board are often cut larger than needed. An oversized hole may be outside the sealant’s range.
Fire-rated sealing for Boddam buildings
Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, with proprietary products, intumescent ones included, tested for their end use. We install fire-rated sealant to that tested detail where it is specified. Being on an island, Boddam means planning around ferry times as well as the weather. With the specification and photos of the openings, the right fire-rated products travel with us.
For a building such as Dunrossness Parish Church, new heating or data runs are the usual reason penetrations need sealing.
Boddam is in the Shetland Islands. Our applicators travel to Boddam for work on service penetrations. We work across 63 places in the Shetland Islands, from busy centres to rural villages.
We take on service penetrations across the ZE2 postcode area, for business premises of every kind. We cover commercial and managed buildings on Millpund, Turniebrae and Hillock. Close to Boddam, our area also takes in South Scousburgh (1 mile north-west), Hestingott (2 miles south), Exnaboe (2 miles south), Toab (2 miles south) and Scatness (3 miles south). As one of the bigger centres in the Shetland Islands, Boddam has a broad mix of commercial, public and industrial buildings. Where a site is remote or on an island, we plan travel and materials carefully, so include the location in your enquiry.
What’s near Boddam
A little further out are Shetland Crofthouse Museum (0.6 miles south-east). Open spaces near Boddam include Sumburgh Head RSPB reserve and Loch of Millpund.
Also near Boddam
Other services in Boddam
Questions about Boddam
Can you take on a job in Boddam, on the island?
Yes, Boddam is within the area we cover. We cover the whole of Scotland. Ferry times and the weather set the plan, so we ask for photos and a full list first.
Do you design the fire stopping for buildings in Boddam?
No. Fire-stopping design and sign-off belong to the designer, principal designer, fire engineer or building control. Our part is installing the specified product to its tested detail, and telling you if the detail calls for something other than sealant.
How do we ask for a quote?
You can use the quote form on this site; alternatively, speak to us on 01277 525 020 or email a schedule or drawings. Include photos or drawings if you have them.
Can staff carry on working while you’re here?
Yes, as long as we plan it. We agree a sequence with your contact so just one area at a time is disrupted.
What happens if old sealant might contain asbestos?
The duty to manage asbestos sits with the building’s dutyholder, so we will ask for the register before work on an older building. If anything suspect turns up, we stop until it’s tested.
Do you work to architects’ specifications?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and we raise anything unclear before work begins.
How long will the new sealant last?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
Commercial clients in Boddam
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. Keys, access and contacts can be agreed in advance.
When you manage a building on behalf of an owner, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative, plus a 12-month guarantee.
Do you need fire stopping in Boddam?
A common fault is a product that was never fire-rated in the first place: builders’ foam or ordinary silicone used to fill a hole. The opening looks sealed but has no fire test evidence behind it and has to be removed.
What tends to prompt an enquiry:
- Open linear gaps along the top of fire-resisting walls
- Fire-rated sealant that has cracked or shrunk back
- Non-fire-rated filler around services
- Damaged fire seals in risers and voids
Around Boddam, we install fire-rated and intumescent sealant to the product’s tested detail wherever it is the specified product.
Comparing quotes
- How long is the guarantee, and what does it include?
- Who will actually carry out the work
- How they’ll work around occupants
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
Why it’s worth doing now in Boddam
Sealing behind the M&E trades area by area beats a sweep at the end. Openings are visible, access is open and nothing has to be taken down, and the right detail can be checked at the time. Exposed buildings in Scotland take a lot of weather, so it’s worth renewing joints around Boddam before they leak.
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well.
Why choose Mastic Doctor in Boddam
- Over 20 years of commercial sealing
- Constructionline member
- Public liability insurance in place
- CSCS-carded applicators
Read how commercial sealant jobs are priced or our accreditations and insurance.