Fire-rated sealing and fire stopping in Scarfskerry, Highland
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Scarfskerry and the surrounding area. Send details for a fixed quote.
- Non-fire-rated filler around services
- Fire stopping installed outside its tested range
- Fire seals cut back for extra cables and never reinstated
Need fire stopping in Scarfskerry?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
About our fire stopping in Scarfskerry
Sealant is the specified answer for plenty of openings, such as metal pipes, cables and some small ducts where the detail covers them. Other openings need collars, wraps, batts, pillows or boards. We use sealant where it is the specified product, and we tell you when a detail calls for something else. We work on pipe penetrations, small duct penetrations where the tested detail allows and service gaps in risers, and the failures we’re asked to look at most are openings left by services added after handover and improvised or mixed-product fire seals. For commercial sealant work in Scarfskerry, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
Hotels and care homes around smaller places like Scarfskerry often have services added during refurbishment. A round of checks after M&E work is good practice, and any gaps found are sealed where fire-rated sealant is specified.
We stand by our work with a 12-month guarantee. That covers our preparation and application, and we come back if anything isn’t right.
- Place
- Scarfskerry (KW14)
- Wider area
- Highland
- Guarantee
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Call
- 01277 525 020
- Updated
- 3 November 2026
Fire stopping in Scarfskerry: the local picture
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, with products tested for that end use. Our part is installing the specified fire-rated sealant to its tested detail.
Wherever the building is near Scarfskerry, design and sign-off of fire stopping sit with the designer, fire engineer or building control; we install what has been specified.
Scarfskerry is about 10 miles east of Thurso, in Highland. If you’re looking for fire stopping in Scarfskerry, we can help, as we do across Highland. 256 places across Highland fall within our area, Scarfskerry among them.
Postcode districts covered here: KW14. Just outside Scarfskerry, we also work in Rattar (1 mile south-east), Dunnet (3 miles south-west), Brough (3 miles west), Castletown (5 miles south-west) and Canisbay (6 miles east). Where a site is remote or on an island, travel and materials need planning ahead, so the full address helps from the start.
Local landmarks in Scarfskerry
Well-known places in the area include Castle of Mey (1.9 miles east) and Westside Croft (3.1 miles south-west). Green spaces nearby include Loch of Mey.
Other services in Scarfskerry
From enquiry to sign-off
In a busy building, we agree a sequence with your contact so the disruption stays in one area at once. Each section is protected, cleaned back and sealed before the next one starts. Jobs near Scarfskerry are often grouped with others in the same area. Tell us how flexible your dates are.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Before we start on site
- Share your working hours and any access restrictions
- Send asbestos survey details if the building is pre-2000
- Send any specification or drawings in advance
Get a fixed quote
For a fixed quote, call 01277 525 020 or email a schedule or drawings, telling us the site location and the nature of the job. You can also send details through our quote form.
Related advice
Looking after the joints
Problems stay small when the joints are checked regularly. Specifically:
- Ask which product is in place before decorating
- Check risers and ceiling voids after each round of works
- Ask the designer to confirm details early on refits
- Record which product was used where
Keep the product data and installation details with the building’s fire safety information. It makes later repairs much easier to match.
A simple record of seal locations and products helps. It tells the next contractor exactly what to reinstate, which saves guesswork.
Scarfskerry: questions and answers
Can you produce the fire-stopping design for a job in Scarfskerry?
No, that sits with the designer, fire engineer or building control. We install what’s specified, to the product’s tested detail.
Is Scarfskerry off your patch?
No. Places such as Scarfskerry are covered as much as the big towns. We cover the whole of Scotland. We plan jobs in smaller places so return trips are kept to a minimum.
How long does a job like this take?
The duration is planned around your programme and the access we’re given. We will give you an estimate of time on site when we quote.
How long do sealant joints last?
Nobody can honestly give a figure in years, since movement, weather, cleaning and use all affect it. Regular checks let you plan resealing before leaks or damage.
What if there’s asbestos in the old mastic?
Managing asbestos is the dutyholder’s responsibility, so we’ll ask for the register before work on an older building. If anything suspect turns up, we stop until it’s tested.
Is the work guaranteed?
Yes. Our workmanship is backed for 12 months.
Do you take on multi-site work?
Yes. A group of buildings can go on one quote, with one point of contact across South East England, Greater London and Scotland.
Common problems we fix in Scarfskerry
Physical damage is another reason seals stop doing their job. Maintenance work can knock a seal, cut it back for an extra cable or remove it with an old pipe and the opening isn’t always resealed.
These are often picked up first by site or facilities staff:
- Fire-stopping items raised at inspection or handover
- Unsealed openings around new pipes and cables
- Improvised or mixed-product fire seals
- Fire seals cut back for extra cables and never reinstated
For buildings in and around Scarfskerry, fire-rated sealant is installed where it is specified, to the manufacturer’s tested detail.
Comparing quotes
- Whether primer will be used where the manufacturer specifies it
- Will RAMS and insurance details be available?
- How they’ll work around occupants
- Are they CHAS accredited or on Constructionline?
What the job involves on each surface
Drylining partitions
Drylined fire walls are tested in a particular build-up. We check that the product’s detail covers that partition type and board thickness.
Linear joints
Joints at the top of partitions may need to move as the slab above deflects. We use the product and backing the detail names for that movement, along the full length of the run.
Why deal with it now?
Fire stopping is a regular point raised at inspections and handover. Late discoveries can delay handover while openings are reopened and resealed, so earlier action pays back. For buildings near Scarfskerry, dealing with all the failing joints at once saves return trips. Send photographs and we’ll quote for everything together.
The price depends on how many linear metres there are, what has to come out first and how the joints are reached. Call for a fixed quote when you are ready.
Why appoint us
- CSCS-carded applicators
- Commercial sealant work since 2005
- Health and safety: CHAS accredited
- 12 months’ guarantee on every job
What sets the cost
We price every job individually. The main factors are:
- Location, for remote and island sites
- Quantities, in metres or numbers
- Phasing around occupants
- Specialist products, such as fire-rated or hygienic sealants
Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
What we need to price the job
Whether it’s one area or a whole building, the same details help:
- Approximate linear metres or a joint schedule
- Specification clauses that apply
- A wide shot and a close-up of the area
- Asbestos survey details if the building is older
Pricing a project or setting a maintenance budget? We will quote against your scope and drawings that you can work with. For a chat about it beforehand, phone 01277 525 020 or email drawings and photos.