Highland · Scotland
Commercial sealant contractors in KW14
We cover every part of the KW14 postcode district, which takes in Thurso, Castletown and Am Blàran Odhar. Every joint is properly prepared, with a 12-month guarantee.
Mastic and sealant across KW14
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Where we work in KW14
- Thurso
- Castletown
- Am Blàran Odhar
- Reay
- Scrabster
- Portskerra
- Melvich
- Brough
- Dunnet
- Forss
- Glengolly
- Janetstown
- Murkle
- Rattar
- Scarfskerry
- Strathy
- Westfield
What we do in KW14
- Construction and new-build mastic
- Mastic sealing for building owners and managing agents
- Facade and window perimeter sealing
- Commercial washroom and wet-area sealing
- Expansion and movement joint sealing
- Commercial sealant contractors
- Coloured and colour-matched sealant
- Industrial and floor joint sealing
- Fire-rated sealing and fire stopping
- See all services
Let us know the job and your postcode and we’ll come back with a price: give us a call on 01277 525 020 or use the quote form.
Districts next door
More in Highland
All places in Highland
Every area we cover
Our commercial sealant contractors service in KW14
A reseal stands or falls on the preparation underneath it. Silicone has no grip on cured silicone, so the failed bead is cut out completely, then both faces are cleaned back to sound, dry material with no dust or grease on them. Where the sealant maker specifies a primer for that substrate, it goes on before the new bead, and a backing rod limits the depth to give the sealant room to work. We work on washrooms and tea points, floor and threshold joints and external facade joints, and the failures we are asked to look at most are weathered facade sealant that no longer flexes and gaps behind commercial kitchen worktops and sinks.
We follow your site rules from the start: sign-in, induction and whatever permit system the building uses. With the paperwork done, the joints are worked through in the order agreed with your site contact, and each area is checked before we leave it.
- First, details come to us: photos, drawings or a schedule of the areas, and a site visit is booked where it helps.
- The failure is diagnosed and a fixed quote issued for the work agreed.
- Before anything is cut out, we agree access, timings and sequence.
- The failed bead is removed and the joint faces cleaned until they’re sound and dry.
- We fit backing to the right depth, prime where specified and lay the new bead.
- Finished joints are checked with you and handed over with our 12-month guarantee.
How we quote
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
What you get with us
- CSCS-carded applicators
- Products installed to the manufacturer’s instructions
- Sealing commercial buildings since 2005
- Workmanship guaranteed for 12 months
Quotes
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, ring 01277 525 020 or send photos by email.
What’s near Thurso
Around Thurso, our work takes us to commercial buildings near Thurso High School and Thurso. Thurso has its own railway station: Thurso station. Nearby you will also find Scrabster Castle (0.7 miles north-west) and Thurso Heritage Museum (0.6 miles north-west).
Where commercial joints are in KW14
From Thurso, Castletown and Am Blàran Odhar outwards, KW14 has a broad spread of commercial premises: shops, offices, hotels, restaurants and units. We cover the whole area, so occupiers with several sites can use one contractor and one point of contact.
Our work reaches every part of Scotland, cities and islands alike, KW14 among them. Travel is planned so the work is finished in as few trips as we can. KW14 includes coastal places, where facades, frames and external slabs take more weather than inland. Product choice and joint preparation matter more there.
Thurso: Premises within reach of Thurso station, under half a mile to the south of Thurso, often have busy frontages where joints are seen by everyone passing. Refits at hotels like Station Hotel, less than half a mile south-east of Thurso, bring joints at vanity tops, bars and reception desks that guests see every day.
What happens if it’s left?
Some low prices are low because nothing gets cut out. New sealant laid on old silicone has nothing to bond to, so it peels. Every quote we give includes full removal and preparation.
Questions to ask before you book
- The named product and why it was chosen
- How the existing material will be dealt with
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- Who will actually carry out the work
Why it fails
A good share of the joints we inspect were topped up instead of being renewed. Fresh sealant won’t stick to the old bead underneath. By the time it shows, there can be two or three layers to cut out.
Clients normally get in touch after noticing one or more of the following:
- Window and door perimeter joints that have cracked open
- Mouldy silicone around WCs, urinals and vanity tops
- Water staining near frames, panels or ceilings
- Greasy, split joints in a kitchen or tea point
After the work
Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. Our advice:
- Keep washroom and kitchen extraction working
- Check joints after other trades have worked nearby
- Deal with small splits before they become leaks
- Keep barriers up until the new sealant has cured
Brief your cleaning team on the joints that have been resealed. Abrasive pads, scrapers and some strong chemicals damage sealant surfaces.
A failed external joint lets water in every time it rains. It can run into cavities, insulation and internal finishes long before anyone sees a stain. Resealing early keeps the problem in the sealant and out of the building.
What affects the price in KW14
We price every job individually. The things that drive the figure:
- Joint width, depth and condition
- How much there is to seal
- Whether old sealant has to be cut out first
- Site requirements such as inductions and permits
What a job costs comes down to how many linear metres there are, how much old material needs removing and how the joints are reached. Call for a quote once you have the details.
What to include in your enquiry
There’s no need for a formal survey. These details are enough to start:
- Any dates the work must fit around
- Approximate linear metres or a joint schedule
- Photos of the joints, close up and from further back
- Any specification or named product
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we will arrange a site visit if anything is unclear.
How the job changes by surface
Commercial kitchens and tea points
A smooth, continuous joint is easier to keep clean, which matters when environmental health officers look at a kitchen. We seal to a neat, cleanable finish and work around service times you agree with us.
Shop fronts and retail fit-outs
Retail work normally has to fit around trading. Tell us your trading hours and access windows and we will plan around them, working in sections where that helps.
Questions about KW14
Can you supply RAMS and insurance details?
Send your site requirements with the enquiry. From you, we’ll need the asbestos information for older buildings and any site rules.
Does the weather affect the work?
It can, when the joints are outside. Sealant won’t bond properly to a wet or frosty joint, so we watch the forecast and rearrange outside work if we have to. Indoors, the weather is rarely a problem.
How long does a typical visit take?
We plan the time on site around your programme and access. We will give you an estimate of time on site when we quote.
Can one contractor look after sealant on all our buildings?
Yes, we can. Send a list of addresses and what’s needed at each, and fixed prices follow, with a suggested sequence.
Will you just go over the old sealant?
No. Sealing over old material is one of the classic causes of early joint failure, so it all comes out first.
When can the area be used after sealing?
We’ll confirm how long the chosen product needs to cure, and flag anything to keep off until it has cured.
Is failed sealant stripped out, or sealed over?
Removal of the failed sealant is always part of the job. New sealant can’t grip the old bead, so laying over it never lasts.